diff --git a/doc/nativeJtag/README.md b/doc/nativeJtag/README.md
index 062dfe1..550d8be 100644
--- a/doc/nativeJtag/README.md
+++ b/doc/nativeJtag/README.md
@@ -104,7 +104,7 @@ in e.g. the path:	`project_name.srcs\sources_1\imports\Downloads`
 1.	`usb_connect.cfg` (interface configuration)
 2.	`soc_init.cfg` (take over the control of the CPU)
 * `usb_connect.cfg`
-You can take it from … https://github.com/SpinalHDL/SaxonSoc/blob/dev-0.3/bsp/digilent/ArtyA7SmpLinux/openocd/usb_connect.cfg … without modifications as we would say, but make sure to check the entire path in your system for the files `xilinx-xc7.cfg` and `jtagspi.cfg`. If required, adapt the find and path for the lines:
+You can take it from ... https://github.com/SpinalHDL/SaxonSoc/blob/dev-0.3/bsp/digilent/ArtyA7SmpLinux/openocd/usb_connect.cfg ... without modifications as we would say. Be aware that it includes the two files `xilinx-xc7.cfg` and `jtagspi.cfg` which are part of the OpenOCD project ... https://github.com/riscv/riscv-openocd/tree/riscv/tcl/cpld , but make sure to check the path for the files. If required, adapt the find and path for the lines:
 ```
 [29]	source [find cpld/xilinx-xc7.cfg]
 [30]	source [find cpld/jtagspi.cfg]
diff --git a/doc/nativeJtag/README.pdf b/doc/nativeJtag/README.pdf
deleted file mode 100644
index b62e000..0000000
Binary files a/doc/nativeJtag/README.pdf and /dev/null differ
diff --git a/doc/nativeJtag/cpld/jtagspi.cfg b/doc/nativeJtag/cpld/jtagspi.cfg
deleted file mode 100644
index e720c39..0000000
--- a/doc/nativeJtag/cpld/jtagspi.cfg
+++ /dev/null
@@ -1,37 +0,0 @@
-set _USER1 0x02
-
-if { [info exists JTAGSPI_IR] } {
-	set _JTAGSPI_IR $JTAGSPI_IR
-} else {
-	set _JTAGSPI_IR $_USER1
-}
-
-if { [info exists TARGETNAME] } {
-	set _TARGETNAME $TARGETNAME
-} else {
-	set _TARGETNAME $_CHIPNAME.proxy
-}
-
-if { [info exists FLASHNAME] } {
-	set _FLASHNAME $FLASHNAME
-} else {
-	set _FLASHNAME $_CHIPNAME.spi
-}
-
-target create $_TARGETNAME testee -chain-position $_CHIPNAME.tap
-flash bank $_FLASHNAME jtagspi 0 0 0 0 $_TARGETNAME $_JTAGSPI_IR
-
-proc jtagspi_init {chain_id proxy_bit} {
-	# load proxy bitstream $proxy_bit and probe spi flash
-	global _FLASHNAME
-	pld load $chain_id $proxy_bit
-	reset halt
-	flash probe $_FLASHNAME
-}
-
-proc jtagspi_program {bin addr} {
-	# write and verify binary file $bin at offset $addr
-	global _FLASHNAME
-	flash write_image erase $bin $addr
-	flash verify_bank $_FLASHNAME $bin $addr
-}
diff --git a/doc/nativeJtag/cpld/xilinx-xc7.cfg b/doc/nativeJtag/cpld/xilinx-xc7.cfg
deleted file mode 100644
index 4c0502c..0000000
--- a/doc/nativeJtag/cpld/xilinx-xc7.cfg
+++ /dev/null
@@ -1,65 +0,0 @@
-# xilinx series 7 (artix, kintex, virtex)
-# http://www.xilinx.com/support/documentation/user_guides/ug470_7Series_Config.pdf
-
-if { [info exists CHIPNAME] } {
-	set _CHIPNAME $CHIPNAME
-} else {
-	set _CHIPNAME xc7
-}
-
-# the 4 top bits (28:31) are the die stepping/revisions. ignore it.
-jtag newtap $_CHIPNAME tap -irlen 6 -ignore-version \
-	-expected-id 0x03622093 \
-	-expected-id 0x03620093 \
-	-expected-id 0x037C4093 \
-	-expected-id 0x0362F093 \
-	-expected-id 0x037C8093 \
-	-expected-id 0x037C7093 \
-	-expected-id 0x037C3093 \
-	-expected-id 0x0362E093 \
-	-expected-id 0x037C2093 \
-	-expected-id 0x0362D093 \
-	-expected-id 0x0362C093 \
-	-expected-id 0x03632093 \
-	-expected-id 0x03631093 \
-	-expected-id 0x03636093 \
-	-expected-id 0x03647093 \
-	-expected-id 0x0364C093 \
-	-expected-id 0x03651093 \
-	-expected-id 0x03747093 \
-	-expected-id 0x03656093 \
-	-expected-id 0x03752093 \
-	-expected-id 0x03751093 \
-	-expected-id 0x03671093 \
-	-expected-id 0x036B3093 \
-	-expected-id 0x036B7093 \
-	-expected-id 0x036BB093 \
-	-expected-id 0x036BF093 \
-	-expected-id 0x03667093 \
-	-expected-id 0x03682093 \
-	-expected-id 0x03687093 \
-	-expected-id 0x03692093 \
-	-expected-id 0x03691093 \
-	-expected-id 0x03696093 \
-	-expected-id 0x036D5093 \
-	-expected-id 0x036D9093 \
-	-expected-id 0x036DB093
-
-pld device virtex2 $_CHIPNAME.tap 1
-
-set XC7_JSHUTDOWN 0x0d
-set XC7_JPROGRAM 0x0b
-set XC7_JSTART 0x0c
-set XC7_BYPASS 0x3f
-
-proc xc7_program {tap} {
-	global XC7_JSHUTDOWN XC7_JPROGRAM XC7_JSTART XC7_BYPASS
-	irscan $tap $XC7_JSHUTDOWN
-	irscan $tap $XC7_JPROGRAM
-	runtest 60000
-	#JSTART prevents this from working...
-	#irscan $tap $XC7_JSTART
-	runtest 2000
-	irscan $tap $XC7_BYPASS
-	runtest 2000
-}