From 5c6cc29304b1520e1622d6ef5f5d901f8af2e5d5 Mon Sep 17 00:00:00 2001 From: Tim Ansell Date: Fri, 22 Feb 2019 14:55:18 -0800 Subject: [PATCH] Fixing other image. --- scripts/Murax/iCE40-hx8k_breakout_board/README.md | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/scripts/Murax/iCE40-hx8k_breakout_board/README.md b/scripts/Murax/iCE40-hx8k_breakout_board/README.md index bd43f4a..1e50a02 100644 --- a/scripts/Murax/iCE40-hx8k_breakout_board/README.md +++ b/scripts/Murax/iCE40-hx8k_breakout_board/README.md @@ -2,6 +2,7 @@ This example is for the [Lattice iCE40HX-8K Breakout Board](http://www.latticesemi.com/Products/DevelopmentBoardsAndKits/iCE40HX8KBreakoutBoard.aspx). An image of this board is shown below; + ![`iCE40HX8K breakout revA`](img/iCE40HX8K-breakout-revA.png) This board can be purchased for ~$USD 49 directly from Lattice and is supported @@ -20,7 +21,8 @@ mode. This requires removing jumper `J7` and putting the pair of jumpers on This is shown in **Figure 5** of the [iCE40HX-8K Breakout Board User Guide](http://www.latticesemi.com/view_document?document_id=50373). which is also reproduced below; -![img/cram-programming-config.png] + +![CRAM Programming Config](img/cram-programming-config.png) Once your board is ready, you should follow the setup instructions at the [top level](../../../README.md).