From 750d744e827c4bc2da320294469e6a0918babb10 Mon Sep 17 00:00:00 2001 From: Unai Martinez-Corral Date: Tue, 15 Mar 2022 12:25:05 +0100 Subject: [PATCH] xc7/linux_litex_demo/README: do not use extlink Signed-off-by: Unai Martinez-Corral --- xc7/linux_litex_demo/README.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/xc7/linux_litex_demo/README.rst b/xc7/linux_litex_demo/README.rst index ad77329..e3e95c3 100644 --- a/xc7/linux_litex_demo/README.rst +++ b/xc7/linux_litex_demo/README.rst @@ -36,7 +36,7 @@ Now you can upload the design with: The LiteX design is provided with an Ethernet module that uses the ``192.168.100.100/24`` IPv4 address that needs to be set on your network interface. - You may find these information useful to correctly setup the network interface: :gh:`timvideos/litex-buildenv/wiki/Networking`. + You may find these information useful to correctly setup the network interface: `timvideos/litex-buildenv/wiki/Networking `__. You should observe the following line in the OpenOCD output: