`default_nettype none

module display_control (
    input  wire logic        clk,
    input  wire logic        reset,
    input  wire logic [15:0] dataIn,
    input  wire logic [ 3:0] digitDisplay,
    input  wire logic [ 3:0] digitPoint,
    output logic      [ 3:0] anode,
    output logic      [ 7:0] segment
);

<<<<<<< HEAD:xc7/additional_examples/button_controller/display_control.sv
  parameter integer COUNT_BITS = 17;

  logic [COUNT_BITS-1:0] count_val;
  logic [           1:0] anode_select;
  logic [           3:0] cur_anode;
  logic [           3:0] cur_data_in;

  always_ff @(posedge clk) begin
    if (reset) count_val <= 0;
    else count_val <= count_val + 1;
  end

=======
module display_control (
    input  wire logic        clk,
    input  wire logic        reset,
    input  wire logic [15:0] dataIn,
    input  wire logic [ 3:0] digitDisplay,
    input  wire logic [ 3:0] digitPoint,
    output logic      [ 3:0] anode,
    output logic      [ 7:0] segment
);

  parameter integer COUNT_BITS = 17;

  logic [COUNT_BITS-1:0] count_val;
  logic [           1:0] anode_select;
  logic [           3:0] cur_anode;
  logic [           3:0] cur_data_in;


  always_ff @(posedge clk) begin
    if (reset) count_val <= 0;
    else count_val <= count_val + 1;
  end

>>>>>>> Ran PWM and timer through verible formatter and linter:xc7/timer/display_control.sv
  assign anode_select = count_val[COUNT_BITS-1:COUNT_BITS-2];

  assign cur_anode =
                        (anode_select == 2'b00) ? 4'b1110 :
                        (anode_select == 2'b01) ? 4'b1101 :
                        (anode_select == 2'b10) ? 4'b1011 :
                        4'b0111;

<<<<<<< HEAD:xc7/additional_examples/button_controller/display_control.sv

=======
>>>>>>> Ran PWM and timer through verible formatter and linter:xc7/timer/display_control.sv
  assign anode = cur_anode | (~digitDisplay);

  assign cur_data_in =
                        (anode_select == 2'b00) ? dataIn[3:0] :
                        (anode_select == 2'b01) ? dataIn[7:4]  :
                        (anode_select == 2'b10) ? dataIn[11:8]  :
                        dataIn[15:12] ;

  assign segment[7] =
                        (anode_select == 2'b00) ? ~digitPoint[0] :
                        (anode_select == 2'b01) ? ~digitPoint[1]  :
                        (anode_select == 2'b10) ? ~digitPoint[2]  :
                        ~digitPoint[3] ;

  assign segment[6:0] =
        (cur_data_in == 0) ? 7'b1000000 :
        (cur_data_in == 1) ? 7'b1111001 :
        (cur_data_in == 2) ? 7'b0100100 :
        (cur_data_in == 3) ? 7'b0110000 :
        (cur_data_in == 4) ? 7'b0011001 :
        (cur_data_in == 5) ? 7'b0010010 :
        (cur_data_in == 6) ? 7'b0000010 :
        (cur_data_in == 7) ? 7'b1111000 :
        (cur_data_in == 8) ? 7'b0000000 :
        (cur_data_in == 9) ? 7'b0010000 :
        (cur_data_in == 10) ? 7'b0001000 :
        (cur_data_in == 11) ? 7'b0000011 :
        (cur_data_in == 12) ? 7'b1000110 :
        (cur_data_in == 13) ? 7'b0100001 :
        (cur_data_in == 14) ? 7'b0000110 :
        7'b0001110;


endmodule