diff --git a/test/common.py b/test/common.py
index e19c6d2..404fb30 100644
--- a/test/common.py
+++ b/test/common.py
@@ -36,6 +36,58 @@ def timeout_generator(ticks):
     raise TimeoutError("Timeout after %d ticks" % ticks)
 
 
+class NativePortDriver:
+    """Generates sequences for reading/writing to LiteDRAMNativePort
+
+    The write/read versions with wait_data=False are a cheap way to perform
+    burst during which the port is being held locked, but this way all the
+    data is being lost (would require separate coroutine to handle data).
+    """
+    def __init__(self, port):
+        self.port = port
+
+    def read(self, address, wait_data=True):
+        yield self.port.cmd.valid.eq(1)
+        yield self.port.cmd.we.eq(0)
+        yield self.port.cmd.addr.eq(address)
+        yield
+        while (yield self.port.cmd.ready) == 0:
+            yield
+        yield self.port.cmd.valid.eq(0)
+        yield
+        if wait_data:
+            while (yield self.port.rdata.valid) == 0:
+                yield
+            data = (yield self.port.rdata.data)
+            yield self.port.rdata.ready.eq(1)
+            yield
+            yield self.port.rdata.ready.eq(0)
+            yield
+            return data
+        else:
+            yield self.port.rdata.ready.eq(1)
+
+    def write(self, address, data, we=None, wait_data=True):
+        if we is None:
+            we = 2**self.port.wdata.we.nbits - 1
+        yield self.port.cmd.valid.eq(1)
+        yield self.port.cmd.we.eq(1)
+        yield self.port.cmd.addr.eq(address)
+        yield
+        while (yield self.port.cmd.ready) == 0:
+            yield
+        yield self.port.cmd.valid.eq(0)
+        yield self.port.wdata.valid.eq(1)
+        yield self.port.wdata.data.eq(data)
+        yield self.port.wdata.we.eq(we)
+        yield
+        if wait_data:
+            while (yield self.port.wdata.ready) == 0:
+                yield
+            yield self.port.wdata.valid.eq(0)
+            yield
+
+
 class CmdRequestRWDriver:
     """Simple driver for Endpoint(cmd_request_rw_layout())"""
     def __init__(self, req, i=0, ep_layout=True, rw_layout=True):
diff --git a/test/test_bankmachine.py b/test/test_bankmachine.py
index 1d692cb..5817232 100644
--- a/test/test_bankmachine.py
+++ b/test/test_bankmachine.py
@@ -256,7 +256,7 @@ class TestBankMachine(unittest.TestCase):
 
     def test_burst_no_request_lost(self):
         # Verify that no request is lost in fast bursts of requests regardless of cmd_buffer_depth
-        for cmd_buffer_depth in [8]:
+        for cmd_buffer_depth in [8, 1, 0]:
             settings = dict(cmd_buffer_depth=cmd_buffer_depth)
             with self.subTest(**settings):
                 dut = BankMachineDUT(1, controller_settings=settings)
diff --git a/test/test_crossbar.py b/test/test_crossbar.py
new file mode 100644
index 0000000..f1ce53d
--- /dev/null
+++ b/test/test_crossbar.py
@@ -0,0 +1,513 @@
+# This file is Copyright (c) 2020 Antmicro <www.antmicro.com>
+# License: BSD
+
+import random
+import unittest
+import functools
+import itertools
+from collections import namedtuple, defaultdict
+
+from migen import *
+
+from litedram.common import *
+from litedram.core.crossbar import LiteDRAMCrossbar
+
+from test.common import timeout_generator, NativePortDriver
+
+
+class ControllerStub:
+    """Simplified simulation of LiteDRAMController as seen by LiteDRAMCrossbar
+
+    This is a simplified implementation of LiteDRAMController suitable for
+    testing the crossbar. It consisits of bankmachine handlers that try to mimic
+    behaviour of real BankMachines. They also simulate data transmission by
+    scheduling it to appear on data interface (data_handler sets it).
+    """
+    W = namedtuple("WriteData", ["bank", "addr", "data", "we"])
+    R = namedtuple("ReadData",  ["bank", "addr", "data"])
+    WaitingData = namedtuple("WaitingData", ["delay", "data"])
+
+    def __init__(self, controller_interface, write_latency, read_latency, cmd_delay=None):
+        self.interface = controller_interface
+        self.write_latency = write_latency
+        self.read_latency = read_latency
+        self.data = []  # data registered on datapath (W/R)
+        self._waiting = []  # data waiting to be set on datapath
+        # incremental generator of artificial read data
+        self._read_data = itertools.count(0x10)
+        # simulated dealy of command processing, by default just constant
+        self._cmd_delay = cmd_delay or (lambda: 6)
+        # minimal logic required so that no two banks will become ready at the same moment
+        self._multiplexer_lock = None
+
+    def generators(self):
+        bank_handlers = [self.bankmachine_handler(bn) for bn in range(self.interface.nbanks)]
+        return [self.data_handler(), *bank_handlers]
+
+    @passive
+    def data_handler(self):
+        # Responsible for passing data over datapath with requested latency
+        while True:
+            # Examine requests to find if there is any for that cycle
+            available = [w for w in self._waiting if w.delay == 0]
+            # Make sure that it is never the case that we have more then 1
+            # operation of the same type
+            type_counts = defaultdict(int)
+            for a in available:
+                type_counts[type(a.data)] += 1
+            for t, count in type_counts.items():
+                assert count == 1, \
+                    "%d data operations of type %s at the same time!" % (count, t.__name__)
+            for a in available:
+                # Remove it from the list and get the data
+                current = self._waiting.pop(self._waiting.index(a)).data
+                # If this was a write, then fill it with data from this cycle
+                if isinstance(current, self.W):
+                    current = current._replace(
+                        data=(yield self.interface.wdata),
+                        we=(yield self.interface.wdata_we),
+                    )
+                # If this was a read, then assert the data now
+                elif isinstance(current, self.R):
+                    yield self.interface.rdata.eq(current.data)
+                else:
+                    raise TypeError(current)
+                # Add it to the data that appeared on the datapath
+                self.data.append(current)
+            # Advance simulation time by 1 cycle
+            for i, w in enumerate(self._waiting):
+                self._waiting[i] = w._replace(delay=w.delay - 1)
+            yield
+
+    @passive
+    def bankmachine_handler(self, n):
+        # Simplified simulation of a bank machine.
+        # Uses a single buffer (no input fifo). Generates random read data.
+        bank = getattr(self.interface, "bank%d" % n)
+        while True:
+            # Wait for a valid bank command
+            while not (yield bank.valid):
+                # The lock is being held as long as there is a valid command
+                # in the buffer or there is a valid command on the interface.
+                # As at this point we have nothing in the buffer, we unlock
+                # the lock only if the command on the interface is not valid.
+                yield bank.lock.eq(0)
+                yield
+            # Latch the command to the internal buffer
+            cmd_addr = (yield bank.addr)
+            cmd_we = (yield bank.we)
+            # Lock the buffer as soon as command is valid on the interface.
+            # We do this 1 cycle after we see the command, but BankMachine
+            # also has latency, because cmd_buffer_lookahead.source must
+            # become valid.
+            yield bank.lock.eq(1)
+            yield bank.ready.eq(1)
+            yield
+            yield bank.ready.eq(0)
+            # Simulate that we are processing the command
+            for _ in range(self._cmd_delay()):
+                yield
+            # Avoid situation that can happen due to the lack of multiplexer,
+            # where more than one bank would send data at the same moment
+            while self._multiplexer_lock is not None:
+                yield
+            self._multiplexer_lock = n
+            yield
+            # After READ/WRITE has been issued, this is signalized by using
+            # rdata_valid/wdata_ready. The actual data will appear with latency.
+            if cmd_we:  # WRITE
+                yield bank.wdata_ready.eq(1)
+                yield
+                yield bank.wdata_ready.eq(0)
+                # Send a request to the data_handler, it will check what
+                # has been sent from the crossbar port.
+                wdata = self.W(bank=n, addr=cmd_addr,
+                               data=None, we=None)  # to be filled in callback
+                self._waiting.append(self.WaitingData(data=wdata, delay=self.write_latency))
+            else:  # READ
+                yield bank.rdata_valid.eq(1)
+                yield
+                yield bank.rdata_valid.eq(0)
+                # Send a request with "data from memory" to the data_handler
+                rdata = self.R(bank=n, addr=cmd_addr, data=next(self._read_data))
+                # Decrease latecy, as data_handler sets data with 1 cycle delay
+                self._waiting.append(self.WaitingData(data=rdata, delay=self.read_latency - 1))
+            # At this point cmd_buffer.source.ready has been activated and the
+            # command in internal buffer has been discarded. The lock will be
+            self._multiplexer_lock = None
+            # removed in next loop if there is no other command pending.
+            yield
+
+
+class CrossbarDUT(Module):
+    default_controller_settings = dict(
+        cmd_buffer_depth=8,
+        address_mapping="ROW_BANK_COL",
+    )
+    default_phy_settings = dict(
+        cwl=2,
+        nphases=2,
+        nranks=1,
+        memtype="DDR2",
+        dfi_databits=2*16,
+        read_latency=5,
+        write_latency=1,
+    )
+    default_geom_settings = dict(
+        bankbits=3,
+        rowbits=13,
+        colbits=10,
+    )
+
+    def __init__(self, controller_settings=None, phy_settings=None, geom_settings=None):
+        # update settings if provided
+        def updated(settings, update):
+            copy = settings.copy()
+            copy.update(update or {})
+            return copy
+
+        controller_settings = updated(self.default_controller_settings, controller_settings)
+        phy_settings        = updated(self.default_phy_settings, phy_settings)
+        geom_settings       = updated(self.default_geom_settings, geom_settings)
+
+        class SimpleSettings(Settings):
+            def __init__(self, **kwargs):
+                self.set_attributes(kwargs)
+
+        settings        = SimpleSettings(**controller_settings)
+        settings.phy    = SimpleSettings(**phy_settings)
+        settings.geom   = SimpleSettings(**geom_settings)
+        self.settings = settings
+
+        self.address_align = log2_int(burst_lengths[settings.phy.memtype])
+        self.interface = LiteDRAMInterface(self.address_align, settings)
+        self.submodules.crossbar = LiteDRAMCrossbar(self.interface)
+
+    def addr_port(self, bank, row, col):
+        # construct an address the way port master would do it
+        assert self.settings.address_mapping == "ROW_BANK_COL"
+        aa = self.address_align
+        cb = self.settings.geom.colbits
+        rb = self.settings.geom.rowbits
+        bb = self.settings.geom.bankbits
+        col  = (col  & (2**cb - 1)) >> aa
+        bank = (bank & (2**bb - 1)) << (cb - aa)
+        row  = (row  & (2**rb - 1)) << (cb + bb - aa)
+        return row | bank | col
+
+    def addr_iface(self, row, col):
+        # construct address the way bankmachine should receive it
+        aa = self.address_align
+        cb = self.settings.geom.colbits
+        rb = self.settings.geom.rowbits
+        col = (col & (2**cb - 1)) >> aa
+        row = (row & (2**rb - 1)) << (cb - aa)
+        return row | col
+
+
+class TestCrossbar(unittest.TestCase):
+    W = ControllerStub.W
+    R = ControllerStub.R
+
+    def test_init(self):
+        dut = CrossbarDUT()
+        dut.crossbar.get_port()
+        dut.finalize()
+
+    def crossbar_test(self, dut, generators, timeout=100, **kwargs):
+        # Runs simulation with a controller stub (passive generators) and user generators
+        if not isinstance(generators, list):
+            generators = [generators]
+        controller = ControllerStub(dut.interface,
+                                    write_latency=dut.settings.phy.write_latency,
+                                    read_latency=dut.settings.phy.read_latency,
+                                    **kwargs)
+        generators += [*controller.generators(), timeout_generator(timeout)]
+        run_simulation(dut, generators)
+        return controller.data
+
+    def test_available_address_mappings(self):
+        # Check that the only supported address mapping is ROW_BANK_COL
+        # (if we start supporting new mappings, then update these tests to also
+        # test these other mappings)
+        def finalize_crossbar(mapping):
+            dut = CrossbarDUT(controller_settings=dict(address_mapping=mapping))
+            dut.crossbar.get_port()
+            dut.crossbar.finalize()
+
+        for mapping in ["ROW_BANK_COL", "BANK_ROW_COL"]:
+            if mapping in ["ROW_BANK_COL"]:
+                finalize_crossbar(mapping)
+            else:
+                with self.assertRaises(KeyError):
+                    finalize_crossbar(mapping)
+
+    def test_address_mappings(self):
+        # Verify that address is translated correctly
+        reads = []
+
+        def producer(dut, port):
+            driver = NativePortDriver(port)
+            for t in transfers:
+                addr = dut.addr_port(bank=t["bank"], row=t["row"], col=t["col"])
+                if t["rw"] == self.W:
+                    yield from driver.write(addr, data=t["data"], we=t.get("we", None))
+                elif t["rw"] == self.R:
+                    data = (yield from driver.read(addr))
+                    reads.append(data)
+                else:
+                    raise TypeError(t["rw"])
+
+        geom_settings = dict(colbits=10, rowbits=13, bankbits=2)
+        dut = CrossbarDUT(geom_settings=geom_settings)
+        port = dut.crossbar.get_port()
+        transfers = [
+            dict(rw=self.W, bank=2, row=0x30, col=0x03, data=0x20),
+            dict(rw=self.W, bank=3, row=0x30, col=0x03, data=0x21),
+            dict(rw=self.W, bank=2, row=0xab, col=0x03, data=0x22),
+            dict(rw=self.W, bank=2, row=0x30, col=0x13, data=0x23),
+            dict(rw=self.R, bank=1, row=0x10, col=0x99),
+            dict(rw=self.R, bank=0, row=0x10, col=0x99),
+            dict(rw=self.R, bank=1, row=0xcd, col=0x99),
+            dict(rw=self.R, bank=1, row=0x10, col=0x77),
+        ]
+        expected = []
+        for i, t in enumerate(transfers):
+            cls = t["rw"]
+            addr = dut.addr_iface(row=t["row"], col=t["col"])
+            if cls == self.W:
+                kwargs = dict(data=t["data"], we=0xff)
+            elif cls == self.R:
+                kwargs = dict(data=0x10 + i)
+            return cls(bank=t["bank"], addr=addr, **kwargs)
+
+        data = self.crossbar_test(dut, producer(port))
+        self.assertEqual(data, expected)
+
+    def test_arbitration(self):
+        # Create multiple masters that write to the same bank at the same time
+        # and verify that all the requests have been sent correctly.
+        def producer(dut, port, num):
+            driver = NativePortDriver(port)
+            addr = dut.addr_port(bank=3, row=0x10 + num, col=0x20 + num)
+            yield from driver.write(addr, data=0x30 + num)
+
+        dut = CrossbarDUT()
+        ports = [dut.crossbar.get_port() for _ in range(4)]
+        masters = [producer(dut, port, i) for i, port in enumerate(ports)]
+        data = self.crossbar_test(dut, masters)
+        expected = {
+            self.W(bank=3, addr=dut.addr_iface(row=0x10, col=0x20), data=0x30, we=0xff),
+            self.W(bank=3, addr=dut.addr_iface(row=0x11, col=0x21), data=0x31, we=0xff),
+            self.W(bank=3, addr=dut.addr_iface(row=0x12, col=0x22), data=0x32, we=0xff),
+            self.W(bank=3, addr=dut.addr_iface(row=0x13, col=0x23), data=0x33, we=0xff),
+        }
+        self.assertEqual(set(data), expected)
+
+    def test_lock_write(self):
+        # Verify that the locking mechanism works
+        # Create a situation when one master A wants to write to banks 0 then 1,
+        # but master B is continuously writing to bank 1 (bank is locked) so
+        # that master A is blocked. We use wait_data=False because we are only
+        # concerned about sending commands fast enough for the lock to be held
+        # continuously.
+        def master_a(dut, port):
+            driver = NativePortDriver(port)
+            adr = functools.partial(dut.addr_port, row=1, col=1)
+            write = functools.partial(driver.write, wait_data=False)
+            yield from write(adr(bank=0), data=0x10)
+            yield from write(adr(bank=1), data=0x11)
+            yield from write(adr(bank=0), data=0x12, wait_data=True)
+
+        def master_b(dut, port):
+            driver = NativePortDriver(port)
+            adr = functools.partial(dut.addr_port, row=2, col=2)
+            write = functools.partial(driver.write, wait_data=False)
+            yield from write(adr(bank=1), data=0x20)
+            yield from write(adr(bank=1), data=0x21)
+            yield from write(adr(bank=1), data=0x22)
+            yield from write(adr(bank=1), data=0x23)
+            yield from write(adr(bank=1), data=0x24)
+
+        dut = CrossbarDUT()
+        ports = [dut.crossbar.get_port() for _ in range(2)]
+        data = self.crossbar_test(dut, [master_a(dut, ports[0]), master_b(dut, ports[1])])
+        expected = [
+            self.W(bank=0, addr=dut.addr_iface(row=1, col=1), data=0x10, we=0xff),  # A
+            self.W(bank=1, addr=dut.addr_iface(row=2, col=2), data=0x20, we=0xff),  #  B
+            self.W(bank=1, addr=dut.addr_iface(row=2, col=2), data=0x21, we=0xff),  #  B
+            self.W(bank=1, addr=dut.addr_iface(row=2, col=2), data=0x22, we=0xff),  #  B
+            self.W(bank=1, addr=dut.addr_iface(row=2, col=2), data=0x23, we=0xff),  #  B
+            self.W(bank=1, addr=dut.addr_iface(row=2, col=2), data=0x24, we=0xff),  #  B
+            self.W(bank=1, addr=dut.addr_iface(row=1, col=1), data=0x11, we=0xff),  # A
+            self.W(bank=0, addr=dut.addr_iface(row=1, col=1), data=0x12, we=0xff),  # A
+        ]
+        self.assertEqual(data, expected)
+
+    def test_lock_read(self):
+        # Verify that the locking mechanism works
+        def master_a(dut, port):
+            driver = NativePortDriver(port)
+            adr = functools.partial(dut.addr_port, row=1, col=1)
+            read = functools.partial(driver.read, wait_data=False)
+            yield from read(adr(bank=0))
+            yield from read(adr(bank=1))
+            yield from read(adr(bank=0))
+            # wait for read data to show up
+            for _ in range(16):
+                yield
+
+        def master_b(dut, port):
+            driver = NativePortDriver(port)
+            adr = functools.partial(dut.addr_port, row=2, col=2)
+            read = functools.partial(driver.read, wait_data=False)
+            yield from read(adr(bank=1))
+            yield from read(adr(bank=1))
+            yield from read(adr(bank=1))
+            yield from read(adr(bank=1))
+            yield from read(adr(bank=1))
+
+        dut = CrossbarDUT()
+        ports = [dut.crossbar.get_port() for _ in range(2)]
+        data = self.crossbar_test(dut, [master_a(dut, ports[0]), master_b(dut, ports[1])])
+        expected = [
+            self.R(bank=0, addr=dut.addr_iface(row=1, col=1), data=0x10),  # A
+            self.R(bank=1, addr=dut.addr_iface(row=2, col=2), data=0x11),  #  B
+            self.R(bank=1, addr=dut.addr_iface(row=2, col=2), data=0x12),  #  B
+            self.R(bank=1, addr=dut.addr_iface(row=2, col=2), data=0x13),  #  B
+            self.R(bank=1, addr=dut.addr_iface(row=2, col=2), data=0x14),  #  B
+            self.R(bank=1, addr=dut.addr_iface(row=2, col=2), data=0x15),  #  B
+            self.R(bank=1, addr=dut.addr_iface(row=1, col=1), data=0x16),  # A
+            self.R(bank=0, addr=dut.addr_iface(row=1, col=1), data=0x17),  # A
+        ]
+        self.assertEqual(data, expected)
+
+    def crossbar_stress_test(self, dut, ports, n_banks, n_ops, clocks=None):
+        # Runs simulation with multiple masters writing and reading to multiple banks
+        controller = ControllerStub(dut.interface,
+                                    write_latency=dut.settings.phy.write_latency,
+                                    read_latency=dut.settings.phy.read_latency)
+        # Store data produced per master
+        produced = defaultdict(list)
+        prng = random.Random(42)
+
+        def master(dut, port, num):
+            # Choose operation types based on port mode
+            ops_choice = {
+                "both":  ["w", "r"],
+                "write": ["w"],
+                "read":  ["r"],
+            }[port.mode]
+            driver = NativePortDriver(port)
+
+            for i in range(n_ops):
+                bank = prng.randrange(n_banks)
+                # We will later distinguish data by its row address
+                row = num
+                col = 0x20 * num + i
+                addr = dut.addr_port(bank=bank, row=row, col=col)
+                addr_iface = dut.addr_iface(row=row, col=col)
+                if prng.choice(ops_choice) == "w":
+                    yield from driver.write(addr, data=i)
+                    produced[num].append(self.W(bank, addr_iface, data=i, we=0xff))
+                else:
+                    yield from driver.read(addr)
+                    produced[num].append(self.R(bank, addr_iface, data=None))
+
+            for _ in range(8):
+                yield
+
+        generators = defaultdict(list)
+        for i, port in enumerate(ports):
+            generators[port.clock_domain].append(master(dut, port, i))
+        generators["sys"] += controller.generators()
+        generators["sys"].append(timeout_generator(80 * n_ops))
+
+        sim_kwargs = {}
+        if clocks is not None:
+            sim_kwargs["clocks"] = clocks
+        run_simulation(dut, generators, **sim_kwargs)
+
+        # split controller data by master, as this is what we want to compare
+        consumed = defaultdict(list)
+        for data in controller.data:
+            master = data.addr >> (dut.settings.geom.colbits - dut.address_align)
+            if isinstance(data, self.R):
+                # master couldn't know the data when it was sending
+                data = data._replace(data=None)
+            consumed[master].append(data)
+
+        return produced, consumed, controller.data
+
+    def test_stress(self):
+        # Test communication in complex scenarion
+        dut = CrossbarDUT()
+        ports = [dut.crossbar.get_port() for _ in range(8)]
+        produced, consumed, consumed_all = self.crossbar_stress_test(dut, ports, n_banks=4, n_ops=8)
+        for master in produced.keys():
+            self.assertEqual(consumed[master], produced[master], msg="master = %d" % master)
+
+    def test_stress_single_bank(self):
+        # Test communication in complex scenarion
+        dut = CrossbarDUT()
+        ports = [dut.crossbar.get_port() for _ in range(4)]
+        produced, consumed, consumed_all = self.crossbar_stress_test(dut, ports, n_banks=1, n_ops=8)
+        for master in produced.keys():
+            self.assertEqual(consumed[master], produced[master], msg="master = %d" % master)
+
+    def test_stress_single_master(self):
+        # Test communication in complex scenarion
+        dut = CrossbarDUT()
+        ports = [dut.crossbar.get_port() for _ in range(1)]
+        produced, consumed, consumed_all = self.crossbar_stress_test(dut, ports, n_banks=4, n_ops=8)
+        for master in produced.keys():
+            self.assertEqual(consumed[master], produced[master], msg="master = %d" % master)
+
+    def test_port_cdc(self):
+        # Verify that correct clock domain is being used
+        dut = CrossbarDUT()
+        port = dut.crossbar.get_port(clock_domain="other")
+        self.assertEqual(port.clock_domain, "other")
+
+    def test_stress_cdc(self):
+        # Verify communication when ports are in different clock domains
+        dut = CrossbarDUT()
+        clocks = {
+            "sys": 10,
+            "clk1": (7, 4),
+            "clk2": 12,
+        }
+        master_clocks = ["sys", "clk1", "clk2"]
+        ports = [dut.crossbar.get_port(clock_domain=clk) for clk in master_clocks]
+        produced, consumed, consumed_all = self.crossbar_stress_test(
+            dut, ports, n_banks=4, n_ops=6, clocks=clocks)
+        for master in produced.keys():
+            self.assertEqual(consumed[master], produced[master], msg="master = %d" % master)
+
+    def test_port_mode(self):
+        # Verify that ports in different modes can be requested
+        dut = CrossbarDUT()
+        for mode in ["both", "write", "read"]:
+            port = dut.crossbar.get_port(mode=mode)
+            self.assertEqual(port.mode, mode)
+
+    # NOTE: Stress testing with different data widths would require complicating
+    # the logic a lot to support registering data comming in multiple words (in
+    # data_handler), address shifting and recreation of packets. Because of this,
+    # and because data width converters are tested separately in test_adaptation,
+    # here we only test if ports report correct data widths.
+    def test_port_data_width_conversion(self):
+        # Verify that correct port data widths are being used
+        dut = CrossbarDUT()
+        dw = dut.interface.data_width
+        data_widths = [dw*2, dw, dw//2]
+        modes = ["both", "write", "read"]
+        for mode, data_width in itertools.product(modes, data_widths):
+            with self.subTest(mode=mode, data_width=data_width):
+                # up conversion is supported only for single direction ports
+                if mode == "both" and data_width < dut.interface.data_width:
+                    with self.assertRaises(NotImplementedError):
+                        dut.crossbar.get_port(mode=mode, data_width=data_width)
+                else:
+                    port = dut.crossbar.get_port(mode=mode, data_width=data_width)
+                    self.assertEqual(port.data_width, data_width)