# # This file is part of LiteDRAM. # # Copyright (c) 2021 Antmicro # SPDX-License-Identifier: BSD-2-Clause import unittest from typing import Mapping from collections import defaultdict from functools import partial, wraps from migen import * from litedram.phy.lpddr5.simphy import LPDDR5SimPHY from litedram.phy.lpddr5 import simsoc from litedram.phy.sim_utils import SimLogger import test.phy_common from test.phy_common import DFISequencer, PadChecker, run_simulation as _run_simulation def generate_clocks(max): def phase(ck, phase): assert ck % 2 == 0 assert phase % 90 == 0 and 0 <= phase < 360 if phase in [90, 270]: assert ck % 4 == 0 p = ck // 2 - 1 p -= (ck // 4) * phase//90 p %= ck assert 1 <= p <= ck-1 return p sys = 8 * max clocks = { "sys": (sys, phase(sys, 0)), "sys_90": (sys, phase(sys, 90)), "sys_180": (sys, phase(sys, 180)), "sys_270": (sys, phase(sys, 270)), } for i in range(1, log2_int(max) + 1): n = 2**i assert sys % n == 0 clocks[f"sys{n}x"] = (sys // n, phase(sys // n, 0)) if n < max or True: clocks[f"sys{n}x_90"] = (sys // n, phase(sys // n, 90)) clocks[f"sys{n}x_180"] = (sys // n, phase(sys // n, 180)) clocks[f"sys{n}x_270"] = (sys // n, phase(sys // n, 270)) return clocks # Clocks are set up such that the first rising edge is on tic 1 (not 0), just as in test_lpddr4. run_simulation = partial(test.phy_common.run_simulation, clocks=generate_clocks(max=8)) dfi_data_to_dq = partial(test.phy_common.dfi_data_to_dq, databits=16, nphases=1, burst=16) dq_pattern = partial(test.phy_common.dq_pattern, databits=16, nphases=1, burst=16) def wck_ratio_subtests(testfunc): """Wraps a test running it for both WCK:CK=2:1 and 4:1. Passes wrapped LPDDR5SimPHY constructor as an argument.""" @wraps(testfunc) def wrapper(self): for wck_ck_ratio in [2, 4]: with self.subTest(wck_ck_ratio=wck_ck_ratio): Phy = lambda *args, **kwargs: LPDDR5SimPHY(*args, wck_ck_ratio=wck_ck_ratio, **kwargs) testfunc(self, Phy) return wrapper class LPDDR5Tests(unittest.TestCase): SYS_CLK_FREQ = 100e6 def run_test(self, dut, dfi_sequence, pad_checkers: Mapping[str, Mapping[str, str]], pad_generators=None, chunk_size=8, **kwargs): # pad_checkers: {clock: {sig: values}} dfi = DFISequencer(dfi_sequence) checkers = {clk: PadChecker(dut.pads, pad_signals) for clk, pad_signals in pad_checkers.items()} generators = defaultdict(list) generators["sys"].append(dfi.generator(dut.dfi)) generators["sys"].append(dfi.reader(dut.dfi)) for clock, checker in checkers.items(): generators[clock].append(checker.run()) pad_generators = pad_generators or {} for clock, gens in pad_generators.items(): gens = gens if isinstance(gens, list) else [gens] for gen in gens: generators[clock].append(gen(dut.pads)) run_simulation(dut, generators, **kwargs) PadChecker.assert_ok(self, checkers, chunk_size=chunk_size) dfi.assert_ok(self) @wck_ratio_subtests def test_lpddr5_reset_n(self, Phy): # Test serialization of DFI reset_n phy = Phy(sys_clk_freq=self.SYS_CLK_FREQ) read = dict(cs_n=0, cas_n=0, ras_n=1, we_n=1) self.run_test(phy, dfi_sequence = [ {0: dict(reset_n=1, **read)}, {}, {}, {}, {0: dict(reset_n=0, **read)}, {}, {0: dict(reset_n=0)}, {0: dict(reset_n=0)}, ], pad_checkers = {"sys_270": { "cs": "0 1100 1100", "reset_n": "x 1111 0100", }}, ) @wck_ratio_subtests def test_lpddr5_cs(self, Phy): # Test that CS is serialized correctly phy = Phy(sys_clk_freq=self.SYS_CLK_FREQ) self.run_test(phy, dfi_sequence = [ {0: dict(cs_n=0, cas_n=1, ras_n=0, we_n=1)}, # ACT {}, {0: dict(cs_n=0, cas_n=1, ras_n=0, we_n=0)}, # PRE {}, {}, {0: dict(cs_n=0, cas_n=1, ras_n=0, we_n=1)}, # ACT {0: dict(cs_n=0, cas_n=1, ras_n=0, we_n=1)}, # ACT (will be ignored) ], # use 270 phase shift to sample when the data is valid, i.e. CS is shifted 180 deg # by PHY (to make it center aligned with CK), then we add 90 to sample in the center of CS pad_checkers = {"sys_270": { 'cs': '0 1101011000', }}, ) @wck_ratio_subtests def test_lpddr5_ck(self, Phy): # Test clock serialization, first cycle is undefined so ignore them phy = Phy(sys_clk_freq=self.SYS_CLK_FREQ) self.run_test(phy, dfi_sequence = [ {0: dict(cs_n=0, cas_n=0, ras_n=1, we_n=1)}, ], pad_checkers = {"sys2x_90": { # sampling at DDR CK 'ck': 'xx' + '10101010' * 3, }}, ) @wck_ratio_subtests def test_lpddr5_ca(self, Phy): # Test proper serialization of commands to CA pads and that overlapping commands are handled phy = Phy(sys_clk_freq=self.SYS_CLK_FREQ) read = {0: dict(cs_n=0, cas_n=0, ras_n=1, we_n=1)} # CAS+RD16 precharge = {0: dict(cs_n=0, cas_n=1, ras_n=0, we_n=0)} self.run_test(phy, dfi_sequence = [ read, {}, {}, precharge, read, # ignored ], pad_checkers = { "sys_270": { 'cs': '0' ' 1 1 0 0 1 ', }, "sys2x": { # it is serialized on DDR sys_270 so check at sys2x with additional cycle (00) 'ca0': '00' '00' '0010 00 0000', 'ca1': '00' '00' '0000 00 0000', 'ca2': '00' '00' '1000 00 0000', 'ca3': '00' '00' '1000 00 0010', 'ca4': '00' '00' '0000 00 0010', 'ca5': '00' '00' '1000 00 0010', 'ca6': '00' '00' '0000 00 0010', } }, chunk_size=4, ) @wck_ratio_subtests def test_lpddr5_cas_wck_sync_read(self, Phy): # Test that WCK sync bit in CAS command is set on first read command phy = Phy(sys_clk_freq=self.SYS_CLK_FREQ) read = {0: dict(cs_n=0, cas_n=0, ras_n=1, we_n=1)} # CAS+RD16 self.run_test(phy, dfi_sequence = [ read, # with WCK sync {}, {}, read, # with WCK sync {}, {}, ], pad_checkers = { "sys_270": { 'cs': '0' ' 1 1 0 1 1 0 ', }, "sys2x": { 'ca0': '00' '00' '0010 0000 1000', 'ca1': '00' '00' '0000 0000 0000', 'ca2': '00' '00' '1000 0010 0000', 'ca3': '00' '00' '1000 0010 0000', 'ca4': '00' '00' '0000 0000 0000', 'ca5': '00' '00' '1000 0010 0000', 'ca6': '00' '00' '0000 0000 0000', } }, chunk_size=4, ) @wck_ratio_subtests def test_lpddr5_cas_wck_sync_mrr(self, Phy): # Test that WCK sync bit in CAS command is set on first MRR command (CAS with WS_RD) phy = Phy(sys_clk_freq=self.SYS_CLK_FREQ) mrr = {0: dict(cs_n=0, cas_n=1, ras_n=1, we_n=0, bank=1)} # MRR is ZQC with bank=1 self.run_test(phy, dfi_sequence = [ mrr, # with WCK sync {}, {}, mrr, # with WCK sync {}, {}, ], pad_checkers = { "sys_270": { 'cs': '0' ' 1 1 0 1 1 0 ', }, "sys2x": { 'ca0': '00' '00' '0000 0000 0000', 'ca1': '00' '00' '0000 0000 0000', 'ca2': '00' '00' '1000 0010 0000', 'ca3': '00' '00' '1010 0010 1000', 'ca4': '00' '00' '0010 0000 1000', 'ca5': '00' '00' '1000 0010 0000', 'ca6': '00' '00' '0000 0000 0000', } }, chunk_size=4, ) @wck_ratio_subtests def test_lpddr5_cas_wck_sync_write(self, Phy): # Test that WCK sync bit in CAS command is set on first write command write = {0: dict(cs_n=0, cas_n=0, ras_n=1, we_n=0)} # CAS+WR16 for masked_write in [True, False]: with self.subTest(masked_write=masked_write): phy = Phy(sys_clk_freq=self.SYS_CLK_FREQ, masked_write=masked_write) w1 = f"10{int(not masked_write)}0" w2 = f"{int(not masked_write)}000" self.run_test(phy, dfi_sequence = [ write, # with WCK sync {}, {}, write, # with WCK sync {}, {}, ], pad_checkers = { "sys_270": { 'cs': '0' ' 1 1 0 1 1 0 ', }, "sys2x": { 'ca0': '00' '00' '0000 0000 0000', 'ca1': '00' '00' '0010 0000 1000', 'ca2': '00' '00'f'{w1} 0010 {w2}', 'ca3': '00' '00' '1000 0010 0000', 'ca4': '00' '00' '1000 0010 0000', 'ca5': '00' '00' '0000 0000 0000', 'ca6': '00' '00' '0000 0000 0000', } }, chunk_size=4, ) @wck_ratio_subtests def test_lpddr5_ca_addressing(self, Phy): # Test that bank/address for different commands are correctly serialized to CA pads # LPDDR5 has only 64 columns, but uses optional 4-bit "burst address" read = dict(cs_n=0, cas_n=0, ras_n=1, we_n=1, bank=0b1111, address=0b1101010000) write_ap = dict(cs_n=0, cas_n=0, ras_n=1, we_n=0, bank=0b1010, address=0b10000000000) activate = dict(cs_n=0, cas_n=1, ras_n=0, we_n=1, bank=0b0010, address=0b111110000111100001) refresh_ab = dict(cs_n=0, cas_n=0, ras_n=0, we_n=1, bank=0b1001, address=0b10000000000) precharge = dict(cs_n=0, cas_n=1, ras_n=0, we_n=0, bank=0b0111, address=0) mrw = dict(cs_n=0, cas_n=0, ras_n=0, we_n=0, bank=0b1010011, address=0b10101010) # bank=7-bit address, address=8-bit op code mrr = dict(cs_n=0, cas_n=1, ras_n=1, we_n=0, bank=1, address=0b1101101) # 7-bit address (bank=1 selects MRR) zqc_start = dict(cs_n=0, cas_n=1, ras_n=1, we_n=0, bank=0, address=0b10000101) # MPC with ZQCAL START operand zqc_latch = dict(cs_n=0, cas_n=1, ras_n=1, we_n=0, bank=0, address=0b10000110) # MPC with ZQCAL LATCH operand for masked_write in [True, False]: with self.subTest(masked_write=masked_write): phy = Phy(sys_clk_freq=self.SYS_CLK_FREQ, masked_write=masked_write) mw = f"10{int(not masked_write)}0" self.run_test(phy, dfi_sequence = [ {}, {0: read}, {}, # WCK sync {0: write_ap}, {}, # with WCK sync {0: activate}, {}, {0: refresh_ab},{}, {0: precharge}, {}, {0: mrw}, {}, {0: mrr}, {}, # with WCK sync {0: zqc_start}, {}, {0: zqc_latch}, {}, ], pad_checkers = { "sys_270": { # RD WR ACT REF PRE MRW MRR ZQCS ZQCL 'cs': '0 0 ' '1 1 1 1 1 1 0 1 0 1 1 1 1 1 0 1 0 1 ', }, "sys2x": { 'ca0': '00' '0000' '0011 0000 1011 0001 0001 0100 0001 0001 0000', 'ca1': '00' '0000' '0001 0011 1110 0000 0001 0101 0000 0000 0001', 'ca2': '00' '0000'f'1001 {mw} 1000 0000 0001 0000 1001 0001 0001', 'ca3': '00' '0000' '1011 1001 1010 0010 0010 1011 1011 0000 0000', 'ca4': '00' '0000' '0000 1000 1010 0010 001x 1100 0010 0010 0010', 'ca5': '00' '0000' '1011 0000 1001 0010 001x 0001 1001 0010 0010', 'ca6': '00' '0000' '0010 0001 1101 0001 0010 1110 0001 0010 0010', } }, chunk_size=4, ) def test_lpddr5_dq_out_2to1(self): # Test serialization of dfi wrdata to DQ pads phy = LPDDR5SimPHY(sys_clk_freq=self.SYS_CLK_FREQ) dfi_data = { 0: dict(wrdata=0x111122223333444455556666777788889999aaaabbbbccccddddeeeeffff0000), } dfi_wrdata_en = {0: dict(wrdata_en=1)} latency = [{}] * (phy.settings.write_latency - 1) self.run_test(phy, dfi_sequence = [dfi_wrdata_en, *latency, dfi_data], pad_checkers = {"sys4x_90": { f'dq{i}': "0000"*phy.settings.write_latency + "0000 0000" + dq_pattern(i, dfi_data, "wrdata") + "0000" for i in range(16) }}, chunk_size=4, ) def test_lpddr5_dq_out_4to1(self): # Test serialization of dfi wrdata to DQ pads phy = LPDDR5SimPHY(sys_clk_freq=self.SYS_CLK_FREQ, wck_ck_ratio=4) dfi_data = { 0: dict(wrdata=0x111122223333444455556666777788889999aaaabbbbccccddddeeeeffff0000), } dfi_wrdata_en = {0: dict(wrdata_en=1)} latency = [{}] * (phy.settings.write_latency - 1) self.run_test(phy, dfi_sequence = [dfi_wrdata_en, *latency, dfi_data], pad_checkers = {"sys8x_90": { f'dq{i}': "00000000"*phy.settings.write_latency + "00000000 00000000" + dq_pattern(i, dfi_data, "wrdata") + "00000000" for i in range(16) }}, ) def test_lpddr5_dmi_out_2to1(self): # Test serialization of dfi wrdata to DQ pads for masked_write in [False, True]: with self.subTest(masked_write=masked_write): phy = LPDDR5SimPHY(sys_clk_freq=self.SYS_CLK_FREQ, masked_write=masked_write) wl = phy.settings.write_latency dfi_data = { 0: dict( # all DQs have the same value on each cycle, each mask bit is 1 byte wrdata = 0xffff0000ffffffff00000000ffffffff0000ffff00000000ffffffff0000ffff, wrdata_mask = 0b11001000110110110101010010110011, ), } dfi_wrdata_en = {0: dict(wrdata_en=1)} latency = [{}] * (wl - 1) pads = { f"dq{i}": "0000"*wl + "0000 0000" "1011 0010 1100 1101" "0000" for i in range(16) } pads["dmi0"] = "0000"*wl + "0000 0000" + ("1010011110110001" if masked_write else 16*"0") + "0000" pads["dmi1"] = "0000"*wl + "0000 0000" + ("1011000011010101" if masked_write else 16*"0") + "0000" self.run_test(phy, dfi_sequence = [dfi_wrdata_en, *latency, dfi_data], pad_checkers = {"sys4x_90": pads}, chunk_size=4, ) def test_lpddr5_dmi_out_4to1(self): # Test serialization of dfi wrdata to DQ pads for masked_write in [False, True]: with self.subTest(masked_write=masked_write): phy = LPDDR5SimPHY(sys_clk_freq=self.SYS_CLK_FREQ, masked_write=masked_write, wck_ck_ratio=4) wl = phy.settings.write_latency dfi_data = { 0: dict( # all DQs have the same value on each cycle, each mask bit is 1 byte wrdata = 0xffff0000ffffffff00000000ffffffff0000ffff00000000ffffffff0000ffff, wrdata_mask = 0b11001000110110110101010010110011, ), } dfi_wrdata_en = {0: dict(wrdata_en=1)} latency = [{}] * (wl - 1) pads = { f"dq{i}": "00000000"*wl + "00000000 00000000" "1011 0010 1100 1101" "00000000" for i in range(16) } pads["dmi0"] = "00000000"*wl + "00000000 00000000" + ("1010011110110001" if masked_write else 16*"0") + "00000000" pads["dmi1"] = "00000000"*wl + "00000000 00000000" + ("1011000011010101" if masked_write else 16*"0") + "00000000" self.run_test(phy, dfi_sequence = [dfi_wrdata_en, *latency, dfi_data], pad_checkers = {"sys8x_90": pads}, ) def test_lpddr5_dq_out_only_1_cycle(self): # Test that only single cycle of wrdata after write_latency gets serialized phy = LPDDR5SimPHY(sys_clk_freq=self.SYS_CLK_FREQ) dfi_data = { 0: dict(wrdata=0x111122223333444455556666777788889999aaaabbbbccccddddeeeeffff0000), } dfi_wrdata_en = {0: dict(wrdata_en=1)} latency = [dfi_data] * (phy.settings.write_latency - 1) self.run_test(phy, dfi_sequence = [dfi_wrdata_en, *latency, dfi_data], pad_checkers = {"sys4x_90": { f'dq{i}': "0000"*phy.settings.write_latency + "0000 0000" + dq_pattern(i, dfi_data, "wrdata") + "0000" for i in range(16) }}, chunk_size=4, ) @wck_ratio_subtests def test_lpddr5_dq_in_rddata_valid(self, Phy): # Test that rddata_valid is set with correct delay phy = Phy(sys_clk_freq=self.SYS_CLK_FREQ) dfi_sequence = [ {0: dict(rddata_en=1)}, # command is issued by MC (appears on next cycle) *[{0: dict(rddata_valid=0)} for _ in range(phy.settings.read_latency - 1)], # nothing is sent during write latency {0: dict(rddata_valid=1)}, {}, ] self.run_test(phy, dfi_sequence = dfi_sequence, pad_checkers = {}, pad_generators = {}, ) def test_lpddr5_dq_in_rddata(self): # Test that data on DQ pads is deserialized correctly to DFI rddata. phy = LPDDR5SimPHY(sys_clk_freq=self.SYS_CLK_FREQ) dfi_data = { 0: dict( rddata=0x111122223333444455556666777788889999aaaabbbbccccddddeeeeffff0000, rddata_valid=1 ), } def sim_dq(pads): i = 0 while not (yield pads.cs): i += 1 assert i < 40, "Timeout waiting for RD cmd" yield # RD is registered on the second CS, then wait for RL (everyting in CK domain) for _ in range(4 * (1 + phy.settings.cl)): yield # wait one more cycle, need to verify the latencies on actual hardware for _ in range(2): yield for cyc in range(16): # send a burst of data on pads for bit in range(16): yield pads.dq_i[bit].eq(int(dq_pattern(bit, dfi_data, "rddata")[cyc])) yield for bit in range(16): yield pads.dq_i[bit].eq(0) yield read_des_delay = 3 # phy.read_des_delay dfi_sequence = [ {0: dict(cs_n=0, cas_n=0, ras_n=1, we_n=1, rddata_en=1)}, *[{} for _ in range(phy.settings.read_latency - 1)], dfi_data, {}, ] self.run_test(phy, dfi_sequence = dfi_sequence, pad_checkers = {}, pad_generators = { "sys4x_180": sim_dq, }, ) def test_lpddr5_wck_sync_2to1_write(self): # Test that correct WCK sequence is generated during WCK sync before burst write for WCK:CK=2:1 cases = { # sys_clk_freq: timings 100e6: dict(t_wckenl_wr=1, t_wckenl_static=1, t_wckenl_toggle_wr=3), # data rate 400 MT/s 200e6: dict(t_wckenl_wr=0, t_wckenl_static=2, t_wckenl_toggle_wr=3), # 800 MT/s 300e6: dict(t_wckenl_wr=1, t_wckenl_static=2, t_wckenl_toggle_wr=4), # 1200 MT/s 500e6: dict(t_wckenl_wr=2, t_wckenl_static=3, t_wckenl_toggle_wr=4), # 2000 MT/s 600e6: dict(t_wckenl_wr=1, t_wckenl_static=4, t_wckenl_toggle_wr=4), # 2400 MT/s 800e6: dict(t_wckenl_wr=3, t_wckenl_static=4, t_wckenl_toggle_wr=4), # 3200 MT/s } for sys_clk_freq, t in cases.items(): with self.subTest(sys_clk_freq=sys_clk_freq, timings=t): phy = LPDDR5SimPHY(sys_clk_freq=sys_clk_freq) wl = phy.settings.write_latency dfi_data = { # `10101010...` pattern on dq0 and `11111...` on others 0: dict(wrdata=0xfffefffffffefffffffefffffffefffffffefffffffefffffffefffffffeffff), } latency = [{}] * (wl - 1) # minimum latency to have correct wck synchronization consecutive_burst_latency = [{}] * 6 wck_preamble = "00 00" * t["t_wckenl_wr"] + "00 00" * t["t_wckenl_static"] + "10 10" * t["t_wckenl_toggle_wr"] wck_burst = "10 10" * (16//4) wck_postamble = "10 10" + "10 00" self.run_test(phy, dfi_sequence = [ {0: dict(cs_n=0, cas_n=0, ras_n=1, we_n=0, wrdata_en=1)}, *latency, dfi_data, *consecutive_burst_latency, {0: dict(cs_n=0, cas_n=0, ras_n=1, we_n=0, wrdata_en=1)}, *latency, dfi_data, *consecutive_burst_latency, {0: dict(cs_n=0, cas_n=0, ras_n=1, we_n=0, wrdata_en=1)}, *latency, dfi_data, *consecutive_burst_latency, {0: dict(cs_n=0, cas_n=0, ras_n=1, we_n=0, wrdata_en=1)}, *latency, dfi_data, ], pad_checkers = { "sys_270": { "cs": "01100000", }, "sys4x_90": { # DQ just for reference "dq0": "0000"*wl + "0000 0000" + "10101010 10101010" + "0000", "dq1": "0000"*wl + "0000 0000" + "11111111 11111111" + "0000", }, "sys4x_270": { # tWCKENL_WR starts counting from first command (CAS) so we add command latency, # then preamble, then toggle for the whole burst, then postamble for tWCKPST=2.5tCK # (but for now we assume that WCK is never disabled) "wck0": "0000 0000" + \ "0000" + wck_preamble + wck_burst + wck_postamble + \ "0000" + wck_preamble + wck_burst + wck_postamble + \ "0000" + wck_preamble + wck_burst + wck_postamble + \ "0000" + wck_preamble + wck_burst + wck_postamble, }, }, chunk_size=4, ) def test_lpddr5_wck_sync_4to1_write(self): # Test that correct WCK sequence is generated during WCK sync before burst write for WCK:CK=4:1 cases = { # sys_clk_freq: timings 50e6: dict(t_wckenl_wr=0, t_wckenl_static=1, t_wckenl_toggle_wr=2), # data rate 400 MT/s 100e6: dict(t_wckenl_wr=0, t_wckenl_static=1, t_wckenl_toggle_wr=2), # 800 MT/s 150e6: dict(t_wckenl_wr=1, t_wckenl_static=1, t_wckenl_toggle_wr=2), # 1200 MT/s 250e6: dict(t_wckenl_wr=1, t_wckenl_static=2, t_wckenl_toggle_wr=2), # 2000 MT/s 300e6: dict(t_wckenl_wr=1, t_wckenl_static=2, t_wckenl_toggle_wr=2), # 2400 MT/s 400e6: dict(t_wckenl_wr=2, t_wckenl_static=2, t_wckenl_toggle_wr=2), # 3200 MT/s } for sys_clk_freq, t in cases.items(): with self.subTest(sys_clk_freq=sys_clk_freq, timings=t): phy = LPDDR5SimPHY(sys_clk_freq=sys_clk_freq, wck_ck_ratio=4) wl = phy.settings.write_latency dfi_data = { # `10101010...` pattern on dq0 and `11111...` on others 0: dict(wrdata=0xfffefffffffefffffffefffffffefffffffefffffffefffffffefffffffeffff), } latency = [{}] * (wl - 1) # minimum latency to have correct wck synchronization consecutive_burst_latency = [{}] * 3 wck_preamble = "00000000" * (t["t_wckenl_wr"] + t["t_wckenl_static"]) + "11001100" + "10101010" * (t["t_wckenl_toggle_wr"] - 1) wck_burst = "10101010" * (16//8) wck_postamble = "10101000" self.run_test(phy, dfi_sequence = [ {0: dict(cs_n=0, cas_n=0, ras_n=1, we_n=0, wrdata_en=1)}, *latency, dfi_data, *consecutive_burst_latency, {0: dict(cs_n=0, cas_n=0, ras_n=1, we_n=0, wrdata_en=1)}, *latency, dfi_data, *consecutive_burst_latency, {0: dict(cs_n=0, cas_n=0, ras_n=1, we_n=0, wrdata_en=1)}, *latency, dfi_data, *consecutive_burst_latency, {0: dict(cs_n=0, cas_n=0, ras_n=1, we_n=0, wrdata_en=1)}, *latency, dfi_data, ], pad_checkers = { "sys_270": { "cs": "01100000", }, "sys8x_90": { # DQ just for reference "dq0": "00000000"*wl + "00000000 00000000" + "10101010 10101010" + "00000000", "dq1": "00000000"*wl + "00000000 00000000" + "11111111 11111111" + "00000000", }, "sys8x_270": { # tWCKENL_WR starts counting from first command (CAS) so we add command latency, # then preamble, then toggle for the whole burst, then postamble for tWCKPST=2.5tCK # (but for now we assume that WCK is never disabled) "wck0": "00000000 00000000" + \ "00000000" + wck_preamble + wck_burst + wck_postamble + \ "00000000" + wck_preamble + wck_burst + wck_postamble + \ "00000000" + wck_preamble + wck_burst + wck_postamble + \ "00000000" + wck_preamble + wck_burst + wck_postamble, }, }, ) def test_lpddr5_wck_sync_2to1_read(self): # Test that correct WCK sequence is generated during WCK sync before burst read for WCK:CK=2:1 cases = { # sys_clk_freq: timings 100e6: dict(t_wckenl_rd=0, t_wckenl_static=1, t_wckenl_toggle_rd=6), # data rate 400 MT/s 200e6: dict(t_wckenl_rd=0, t_wckenl_static=2, t_wckenl_toggle_rd=7), # 800 MT/s 300e6: dict(t_wckenl_rd=1, t_wckenl_static=2, t_wckenl_toggle_rd=8), # 1200 MT/s 500e6: dict(t_wckenl_rd=2, t_wckenl_static=3, t_wckenl_toggle_rd=8), # 2000 MT/s 600e6: dict(t_wckenl_rd=3, t_wckenl_static=4, t_wckenl_toggle_rd=10), # 2400 MT/s 800e6: dict(t_wckenl_rd=5, t_wckenl_static=4, t_wckenl_toggle_rd=10), # 3200 MT/s } for sys_clk_freq, t in cases.items(): with self.subTest(sys_clk_freq=sys_clk_freq, timings=t): phy = LPDDR5SimPHY(sys_clk_freq=sys_clk_freq) rl = phy.settings.read_latency latency = [{}] * (rl - 1) wck_preamble = "00 00" * t["t_wckenl_rd"] + "00 00" * t["t_wckenl_static"] + "10 10" * t["t_wckenl_toggle_rd"] wck_burst = "10 10" * (16//4) wck_postamble = "10 10" + "10 00" self.run_test(phy, dfi_sequence = [ {0: dict(cs_n=0, cas_n=0, ras_n=1, we_n=1, rddata_en=1)}, *latency, {0: dict(rddata_valid=1)}, ], pad_checkers = { "sys_270": { "cs": "01100000", }, "sys4x_270": { "wck0": "0000 0000 0000" + wck_preamble + wck_burst + wck_postamble + "00 00", }, }, chunk_size=4, ) def test_lpddr5_wck_sync_4to1_read(self): # Test that correct WCK sequence is generated during WCK sync before burst read for WCK:CK=4:1 cases = { # sys_clk_freq: timings 50e6: dict(t_wckenl_rd=0, t_wckenl_static=1, t_wckenl_toggle_rd=3), # data rate 400 MT/s 100e6: dict(t_wckenl_rd=0, t_wckenl_static=1, t_wckenl_toggle_rd=4), # 800 MT/s 150e6: dict(t_wckenl_rd=1, t_wckenl_static=1, t_wckenl_toggle_rd=4), # 1200 MT/s 250e6: dict(t_wckenl_rd=1, t_wckenl_static=2, t_wckenl_toggle_rd=4), # 2000 MT/s 300e6: dict(t_wckenl_rd=2, t_wckenl_static=2, t_wckenl_toggle_rd=5), # 2400 MT/s 400e6: dict(t_wckenl_rd=3, t_wckenl_static=2, t_wckenl_toggle_rd=5), # 3200 MT/s } for sys_clk_freq, t in cases.items(): with self.subTest(sys_clk_freq=sys_clk_freq, timings=t): phy = LPDDR5SimPHY(sys_clk_freq=sys_clk_freq, wck_ck_ratio=4) rl = phy.settings.read_latency latency = [{}] * (rl - 1) wck_preamble = "00000000" * (t["t_wckenl_rd"] + t["t_wckenl_static"]) + "11001100" + "10101010" * (t["t_wckenl_toggle_rd"] - 1) wck_burst = "10101010" * (16//8) wck_postamble = "10101000" self.run_test(phy, dfi_sequence = [ {0: dict(cs_n=0, cas_n=0, ras_n=1, we_n=1, rddata_en=1)}, *latency, {0: dict(rddata_valid=1)}, ], pad_checkers = { "sys_270": { "cs": "01100000", }, "sys8x_270": { "wck0": "00000000 00000000 00000000" + wck_preamble + wck_burst + wck_postamble + "00000000", }, }, ) def test_lpddr5_wck_leveling(self): # Test that correct WCK sequence is generated during WCK sync before burst write for WCK:CK=4:1 for wck_ck_ratio in [2, 4]: with self.subTest(wck_ck_ratio=wck_ck_ratio): phy = LPDDR5SimPHY(sys_clk_freq=50e6, wck_ck_ratio=wck_ck_ratio) def write_leveling(pads): for _ in range(4): yield from phy._wlevel_en.write(1) yield from phy._wlevel_strobe.write(1) for i in range(4): yield yield from phy._wlevel_en.write(0) self.run_test(phy, dfi_sequence = {}, pad_checkers = { f"sys4x_270": { "wck0": "0000" + \ "0000" * 3 + "1010" * 4 + \ "0000" * 3 + "1010" * 4 + \ "0000" * 3 + "1010" * 4 + \ "0000" * 3 + "1010" * 4, }, }, pad_generators = { "sys": write_leveling, } ) class VerilatorLPDDR5Tests(unittest.TestCase): def check_logs(self, logs, allowed): for match in SimLogger.LOG_PATTERN.finditer(logs): if match.group("level") in ["WARN", "ERROR"]: is_allowed = any( lvl == match.group("level") and msg in match.group("msg") for lvl, msg in allowed ) self.assertTrue(is_allowed, msg=match.group(0)) def run_test(self, args, allowed=None, **kwargs): import pexpect command = ["python3", simsoc.__file__, *args] timeout = 12 * 60 # give more than enough time p = pexpect.spawn(" ".join(command), timeout=timeout, **kwargs) res = p.expect(["Memtest OK", "Memtest KO"]) self.assertEqual(res, 0, msg="{}\nGot '{}'".format(p.before.decode(), p.after.decode())) # print(p.before.decode()) self.check_logs(p.before.decode(), allowed=allowed or []) def test_lpddr5_sim_no_delays(self): # Fast test of simulation with L2 cache (so no data masking is required) for wck_ck_ratio in [2, 4]: with self.subTest(wck_ck_ratio=wck_ck_ratio): self.run_test([ "--finish-after-memtest", "--log-level=warn", "--disable-delay", f"--wck-ck-ratio={wck_ck_ratio}", "--no-refresh", # FIXME: avoids warnings before initialization ]) def test_lpddr5_sim_delays_no_cache(self): # Test simulation with regular delays and no L2 cache (masked write must work) for wck_ck_ratio in [2, 4]: with self.subTest(wck_ck_ratio=wck_ck_ratio): # These happen due the fact that LiteDRAM starts in hw control mode which holds reset_n=1 # all the time. When the DRAM initialization starts we do a reset once more, this time properly. allowed = [ ("WARN", "tPW_RESET violated: RESET_n held low for too short"), ("WARN", "tINIT1 violated: RESET deasserted too fast"), ] self.run_test([ "--finish-after-memtest", "--log-level=warn", "--l2-size=0", f"--wck-ck-ratio={wck_ck_ratio}", "--no-refresh", # FIXME: LiteDRAM sends refresh commands when only MRW/MRR are allowed ], allowed=allowed)