--- # PHY ----------------------------------------------------------------------
# Copyright (c) 2023 LumiGuide Fietsdetectie B.V. <goemansrowan@gmail.com>
# License: BSD

phy: LiteEthECP5PHYRGMII
phy_tx_delay: 0e-9
phy_rx_delay: 2e-9
device: LFE5U-25F-6BG256C
vendor: lattice
toolchain: trellis
# Core -------------------------------------------------------------------------
clk_freq: 125e6
core: udp

mac_address: 0x10e2d5000000
ip_address: 172.30.0.1

tx_cdc_depth: 16
tx_cdc_buffered: True
rx_cdc_depth: 16
rx_cdc_buffered: True
# UDP Ports --------------------------------------------------------------------
# mode `raw` vs `streamer` mode:
# The streamer mode is a convenience wrapper around a `raw` UDP port. A raw UDP
# port receives and requires the full UDP header information without filtering.
# In addition, when transmitting packets, it's required to make sure the user
# can burst a full packet without issuing a stall.
# The `streamer` mode on the other hand, allows a port to be specified to
# receive/transmit on. There is also a FIFO between the raw port and the
# streamer port. This means the user is not required to be able to burst packet
# into the core. But a limitation of this is that the user relinquishes
# control of transmitted UDP packet sizes.
udp_ports:
  raw:
    data_width: 32
    mode: raw
  streamer1:
    data_width: 32
    port: 1337
    mode: streamer
  streamer2:
    data_width: 32
    port: 6077
    mode: streamer