e7d00a8c43
ti60_f225_dev_kit: Update to new HyperRAM core with 2:1 ratio.
...
Tested at up to 250MHz sys_clk -> 125MHz HyperRAM Clk.
2024-08-29 12:35:39 +02:00
fd4f9ac186
targets: Use KILOBYTE/MEGABYTE constants when possible.
2024-08-29 12:18:19 +02:00
664525471f
Got HDMI to work on hardware
2024-08-28 20:19:33 +02:00
5bfde29ce4
platforms/lattice_certuspro_nx_evn.py: fix led pinout
2024-08-28 17:02:05 +02:00
c5d1a252c5
targets: Fix build with --cpu-type=None on iCE40/Up5kSPRAM.
2024-08-28 15:53:53 +02:00
30e26cacac
Add sdcard and usb ohci support
2024-08-27 08:31:53 +02:00
abaa9c404c
Fix the reset
2024-08-26 18:27:55 +02:00
144462e862
add jtag
2024-08-26 18:08:09 +02:00
d2cc8ad815
Got LPDDR4 to work
2024-08-26 16:54:53 +02:00
e604745c7d
wip
2024-08-26 13:05:57 +02:00
0f8b8defb4
efinix ti375 c529 dev kit bios OK
2024-08-26 11:29:27 +02:00
4002b8167c
Merge pull request #602 from trabucayre/fix_tangPrimer20k_iostandard
...
platforms/sipeed_tang_primer_20k.py: fix IOStandard values
2024-08-19 17:14:25 +02:00
52fc033bf5
Merge pull request #599 from trabucayre/sipeed_tang_gw5A_SDRAM
...
Sipeed tang gw5 a sdram
2024-08-19 17:12:48 +02:00
a9504502fe
Merge pull request #598 from malled2002/fix-enclustra-kx2
...
enclustra mercury kx2+: fix pinnumber on connector C
2024-08-19 17:11:37 +02:00
a5ee3c807a
platforms/sipeed_tang_primer_20k.py: fix IOStandard values
2024-08-14 09:16:39 +02:00
b1a6da84b3
sipeed_tang_primer_25k: add SDRAM support (j3 connector), allows user to select between mister and sipeed SDRAM module
2024-08-04 12:14:56 +02:00
2fa838b79d
sipeed_tang_mega_138k_pro: added SDRAM sipeed variant, allows user to select between mister and sipeed SDRAM module, fix sipeed SDRAM memory module
2024-08-04 12:13:47 +02:00
241dfb6780
fix pinnumber on connector C
2024-08-01 19:14:49 +02:00
81209b9fd1
platforms/enclustra_mercury_xu8_pe3: Revert to VivadoProgrammer since OpenFPGALoader is not albe to load bitstream correctly if FPGA is not already configured.
2024-07-22 15:28:25 +02:00
938bf8b3a6
targets/lattice_certuspro_nx_xx,targets/lattice_crosslink_nx_xxx: pass platform to NXOSCA CTOR
2024-07-22 15:18:27 +02:00
ab732011b3
plaforms/lattice_certuspro_nx_xx: SPI_MASTER_PORT disabled (required to have access to the flash), added default clk period constraints
2024-07-22 14:49:03 +02:00
5d4ebeb09c
targets: Add initial Enclustra Mercury+ XU8/PE3 target with DRAM and PCIe.
2024-07-22 11:40:19 +02:00
0394b626fa
platforms/enclustrat_mercury_xu8_pe3: Switch to OpenFPGALoader for loading FPGA.
2024-07-22 11:39:17 +02:00
8f8e0bd228
targets/enclustra: Add Enclustra to identifier.
2024-07-22 11:38:22 +02:00
f844d06da2
targets/litex_acorn_baseboard_mini: Add detect_ftdi_chip method since newer batch of baseboard is mounted with FTDI ft4232 chips.
...
FT2232 and FT4232 chips are footprint compatible but still need to be handled differently from software.
2024-07-19 15:43:25 +02:00
6d3c87a6f7
platforms/lattice_certuspro_nx_versa: Fix default_clk.
2024-07-17 15:14:53 +02:00
fff2e6bd3f
platform: Add Lattice CertusPro-NX Versa initial support.
2024-07-17 14:53:12 +02:00
88ab3eca6f
targets: Map SPRAM to SRAM when use as SRAM.
2024-07-17 11:01:34 +02:00
524387b45d
sqrl_xcu1525: Fix typo.
2024-07-11 12:54:38 +02:00
e94e84eb16
sqrl_xcu1525: Add more QSFP IOs.
2024-07-10 18:20:01 +02:00
c7b436a202
sqrl_xcu1525: Add QSFP-0/1 ref clks and rearrange a bit naming.
2024-07-10 17:04:48 +02:00
00df115e86
sqrl_xcu1525: Add QSFP-0/1 IOs.
2024-07-10 16:44:12 +02:00
0ed9e3ac85
Merge pull request #596 from gaoyichuan/vcu118-fmc
...
platforms/xilinx_vcu118: add fmc and pmod connector pinouts
2024-07-10 09:17:41 +02:00
5870b078f8
platforms/xilinx_vcu118: add fmc and pmod connector pinouts
...
VCU118 board has one FMC HPC, one FMC+ HSPC and two PMOD connectors,
Vivado board files does not contain pinouts for these, so pinouts are
taken from VCU118 Evaluation Board User Guide (UG1224).
Signed-off-by: Yichuan Gao <gaoyichuan000@gmail.com>
2024-07-06 00:16:53 +08:00
15c6f89b1a
#570 : Update CAN support with LiteX https://github.com/enjoy-digital/litex/pull/2007 .
2024-07-05 10:26:28 +02:00
2e120bf8a4
Merge pull request #570 from disdi/master
...
Add support for CTUCAN for Arty & Genesys2 board
2024-07-05 09:21:09 +02:00
ac427feb0a
targets/lattice_certuspro_nx_vvml,lattice_certuspro_nx_evn: switch sys_clk to NXPLL
2024-07-03 12:36:28 +02:00
9898672744
siglent_sdr1104xe: Update IP/MAC addresses.
2024-07-02 17:09:23 +02:00
7a157d787b
lattice_certus_prox_nx: Add missing OpenFPGAALoader import.
2024-07-01 15:58:31 +02:00
1c06988d80
platforms,targets/lattice_certuspro_nx_evn,lattice_certuspro_nx_vvml: set sysconfig SPI_MASTER mode by default at platform level
2024-07-01 11:07:25 +02:00
40204ac815
Merge pull request #595 from trabucayre/lattice_certusnxpro
...
Lattice certusnxpro
2024-06-28 13:26:47 +02:00
5813df9b44
Merge pull request #591 from VOGL-electronic/efinix_trion_t20_pulse_reset
...
targets: efinix_trion_t20_bga256_dev_kit: add pulse for reset
2024-06-28 13:24:29 +02:00
8579af5710
lattice_certuspro_nx_vvml: new board support
2024-06-28 12:47:57 +02:00
f27bbc9645
lattice_certuspro_nx_evn: new board support
2024-06-28 12:47:16 +02:00
bd58227c86
platforms/sqrl_acorn/_litex_acorn_baseboard_mini_io: Add SFP-I2C and Debug IOs.
2024-06-27 14:55:15 +02:00
4f8540d53e
targets/litex_acorn_baseboard_mini: Switch to _litex_acorn_baseboard_mini_io.
2024-06-27 14:23:43 +02:00
91e787b5c3
platforms/sqrl_acorn: Add _litex_acorn_baseboard_mini_io for LiteX Acorn Baseboard Mini specific IOs.
2024-06-27 14:23:17 +02:00
c205bb756b
targets: efinix_trion_t20_bga256_dev_kit: add pulse for reset
...
to do a reset on the trion t20 a pulse is needed.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
2024-06-24 09:14:55 +02:00
75ef26b8e5
platforms/machdyne_mozart_mx1.py: adding default_clk_name, default_clk_period (fix CI failure)
2024-06-22 22:43:06 +02:00
f8d41e880d
Merge pull request #593 from machdyne/master
...
machdyne: fix typos; add vanille and lakritz
2024-06-22 21:43:02 +02:00
Florent Kermarrec
Dolu1990
Gwenhael Goavec-Merou
Gwenhael Goavec-Merou
Malte
Yichuan Gao
Fin Maaß