#!/usr/bin/env python3 ''' --------------------- LiteX SoC on Marble --------------------- with support for SO-DIMM DDR3, ethernet and UART. To synthesize, add --build, to configure the FPGA over jtag, add --load. ----------------- Example configs ----------------- with ethernet and DDR3, default IP: 192.168.1.50/24 ./marble.py --with-ethernet --with-bist --spd-dump VR7PU286458FBAMJT.txt lightweight config ./marble.py --integrated-main-ram-size 16384 --cpu-type serv etherbone: access wishbone over ethernet ./marble.py --with-etherbone --csr-csv build/csr.csv make sure reset is not asserted (RTS signal), set PC IP to 192.168.1.100/24, then test and benchmark the etherbone link: cd build litex/liteeth/bench/test_etherbone.py --udp --ident --access --sram --speed ''' from migen import * from litex_boards.platforms import berkeleylab_marble from litex.soc.cores.clock import * from litex.soc.integration.soc_core import * from litex.soc.integration.builder import * from litex.soc.cores.led import LedChaser from litex.soc.cores.bitbang import I2CMaster from litedram.modules import MT8JTF12864, parse_spd_hexdump, SDRAMModule from litedram.phy import s7ddrphy from liteeth.phy.s7rgmii import LiteEthPHYRGMII # CRG ---------------------------------------------------------------------------------------------- class _CRG(Module): def __init__(self, platform, sys_clk_freq, resets=[]): self.rst = Signal() self.clock_domains.cd_sys = ClockDomain() self.clock_domains.cd_sys4x = ClockDomain() self.clock_domains.cd_sys4x_dqs = ClockDomain() self.clock_domains.cd_idelay = ClockDomain() # # # self.submodules.pll = pll = S7MMCM(speedgrade=-2) resets.append(self.rst) self.comb += pll.reset.eq(reduce(or_, resets)) pll.register_clkin(platform.request("clk125"), 125e6) pll.create_clkout(self.cd_sys, sys_clk_freq) pll.create_clkout(self.cd_sys4x, 4*sys_clk_freq) pll.create_clkout(self.cd_sys4x_dqs, 4*sys_clk_freq, phase=90) pll.create_clkout(self.cd_idelay, 200e6) platform.add_false_path_constraints(self.cd_sys.clk, pll.clkin) # Ignore sys_clk to pll.clkin path created by SoC's rst. self.submodules.idelayctrl = S7IDELAYCTRL(self.cd_idelay) # BaseSoC ------------------------------------------------------------------------------------------ class BaseSoC(SoCCore): def __init__(self, sys_clk_freq=int(125e6), with_ethernet = False, with_etherbone = False, with_rts_reset = False, with_led_chaser = True, spd_dump = None, **kwargs ): platform = berkeleylab_marble.Platform() # CRG, resettable over USB serial RTS signal ----------------------------------------------- resets = [] if with_rts_reset: ser_pads = platform.lookup_request('serial') resets.append(ser_pads.rts) self.submodules.crg = _CRG(platform, sys_clk_freq, resets) # SoCCore ---------------------------------------------------------------------------------- SoCCore.__init__(self, platform, sys_clk_freq, ident="LiteX SoC on Berkeley-Lab Marble", **kwargs) # DDR3 SDRAM ------------------------------------------------------------------------------- if not self.integrated_main_ram_size: self.submodules.ddrphy = s7ddrphy.K7DDRPHY( platform.request("ddram"), memtype = "DDR3", nphases = 4, sys_clk_freq = sys_clk_freq ) if spd_dump is not None: ram_spd = parse_spd_hexdump(spd_dump) ram_module = SDRAMModule.from_spd_data(ram_spd, sys_clk_freq) print('DDR3: loaded config from', spd_dump) else: ram_module = MT8JTF12864(sys_clk_freq, "1:4") # KC705 chip, 1 GB print('DDR3: No spd data specified, falling back to MT8JTF12864') self.add_sdram("sdram", phy = self.ddrphy, module = ram_module, # size=0x40000000, # Limit its size to 1 GB l2_cache_size = kwargs.get("l2_size", 8192), with_bist = kwargs.get("with_bist", False) ) # Ethernet --------------------------------------------------------------------------------- if with_ethernet or with_etherbone: self.submodules.ethphy = LiteEthPHYRGMII( clock_pads = self.platform.request("eth_clocks"), pads = self.platform.request("eth"), tx_delay = 0 ) if with_ethernet: self.add_ethernet( phy = self.ethphy, dynamic_ip = True, software_debug = False ) if with_etherbone: self.add_etherbone(phy=self.ethphy, buffer_depth=255) # System I2C (behing multiplexer) ---------------------------------------------------------- i2c_pads = platform.request('i2c_fpga') self.submodules.i2c = I2CMaster(i2c_pads) # Leds ------------------------------------------------------------------------------------- if with_led_chaser: self.submodules.leds = LedChaser( pads = platform.request_all("user_led"), sys_clk_freq = sys_clk_freq) # Build -------------------------------------------------------------------------------------------- def main(): from litex.soc.integration.soc import LiteXSoCArgumentParser parser = LiteXSoCArgumentParser(description="LiteX SoC on BerkeleyLab Marble") target_group = parser.add_argument_group(title="Target options") target_group.add_argument("--build", action="store_true", help="Build bitstream.") target_group.add_argument("--load", action="store_true", help="Load bitstream.") target_group.add_argument("--sys-clk-freq", default=125e6, help="System clock frequency.") target_group.add_argument("--with-ethernet", action="store_true", help="Enable Ethernet support.") target_group.add_argument("--with-etherbone", action="store_true", help="Enable Etherbone support.") target_group.add_argument("--with-rts-reset", action="store_true", help="Connect UART RTS line to sys_clk reset.") target_group.add_argument("--with-bist", action="store_true", help="Add DDR3 BIST Generator/Checker.") target_group.add_argument("--spd-dump", type=str, help="DDR3 configuration file, dumped using the `spdread` command in LiteX BIOS.") builder_args(parser) soc_core_args(parser) args = parser.parse_args() soc = BaseSoC( sys_clk_freq = int(float(args.sys_clk_freq)), with_ethernet = args.with_ethernet, with_etherbone = args.with_etherbone, with_bist = args.with_bist, spd_dump = args.spd_dump, **soc_core_argdict(args) ) builder = Builder(soc, **builder_argdict(args)) builder.build(run=args.build) if args.load: prog = soc.platform.create_programmer() prog.load_bitstream(builder.get_bitstream_filename(mode="sram")) if __name__ == "__main__": main()