__ _ __ _ __ ___ __ / / (_) /____ | |/_/___/ _ )___ ___ ________/ /__ / /__/ / __/ -_)> Intro --------

From the very tiny Fomu to large PCIe accelerator boards....

This repository contains the platforms/targets currently supported by LiteX: - The platform provides the definition of the board: IOs, constraints, clocks, components + methods to load and flash the bitstream to it. - The target provides a LiteX base design for the board that allows you to create a SoC (with or without a CPU) and integrate easily all the base components of your board: Ethernet, DRAM, PCIe, SPIFlash, SDCard, Leds, GPIOs, etc... The targets can be used as a base to build more complex or custom SoCs. They are are for example directly reused by the [Linux-on-LiteX-VexRiscv](https://github.com/litex-hub/linux-on-litex-vexriscv) project that is just using a specific configuration (Linux-capable CPU, additional peripherals). Basing your design on provided targets allows to to reduce code duplication between very various projects. First make sure to install LiteX correctly by following the [installation guide](https://github.com/enjoy-digital/litex/wiki/Installation) and have a look at the [LiteX's wiki](https://github.com/enjoy-digital/litex/wiki) for [tutorials](https://github.com/enjoy-digital/litex/wiki/Tutorials-Resources), [examples of projects](https://github.com/enjoy-digital/litex/wiki/Projects) and more information to use/build FPGA designs with it. Each target provides a default configuration with a CPU, ROM, SRAM, UART, DRAM (if available), Ethernet (if available), etc... that can be simply built and loaded to the FPGA with: $ python3 -m litex_boards.targets. --build --load You can then open a terminal on the main UART of the board and interact with the LiteX BIOS:

**Build/Compilation behavior:** - python3 -m litex_boards.targets.board : Test LiteX/Migen syntax but does not generate anything. - Add `--build` to generate the SoC/Software headers and run the Software/Gateware compilation. - Add `--no-compile` to disable the Softwate/Gateware compilation. - Add `--no-compile-software` to disable the Software compilation. - Add `--no-compile-gateware` to disable the Gateware compilation. But this is just the starting point to create your own hardware! You can then: - Change the CPU: add `--cpu-type=lm32, microwatt, serv, rocket, etc... ` - Change the Bus standard: add `--bus-standard=wishbone, axi-lite` - Enable components: add `--with-ethernet --with-etherbone --with-sdcard etc...` - [Load application code to the CPU](https://github.com/enjoy-digital/litex/wiki/Load-Application-Code-To-CPU) over UART/Ethernet/SDCard, etc... - Create a bridge with your computer to easily [access the main bus of your SoC](https://github.com/enjoy-digital/litex/wiki/Use-Host-Bridge-to-control-debug-a-SoC). - Add a Logic Analyzer to your SoC to easily [observe/debug your design](https://github.com/enjoy-digital/litex/wiki/Use-LiteScope-To-Debug-A-SoC). - Simulate your SoC and interact with it at decent speed with [LiteX Sim](https://github.com/enjoy-digital/litex/blob/master/litex/tools/litex_sim.py)/Verilator. - Integrate external cores/CPU to create your own design. - etc... Please use `python3 -m litex_boards.targets. --help` to see the pre-built various possibilities. Hoping you will find this useful and enjoy it, please contribute back if you make improvements that could be useful to others or find issues! **A question or want to get in touch? Our IRC channel is [#litex at irc.libera.chat](https://web.libera.chat/#litex)** [> Supported boards ------------------- LiteX-Boards currently supports > 150 boards from very various FPGA Vendors (Xilinx, Intel, Lattice, Efinix, Gowin, etc...)! Some of these boards are fully open-hardware boards (Fomu, NeTV2, OrangeCrab, Butterstick, etc...) with FPGAs often supported by the open-source toolchains, some of them are repurposed off-the-shelf hardware (Colorlight 5A/I5/I9, SQRL Acorn CLE 215+, FK33, Siglent SDS1104X-E, Decklink Mini 4k, etc...) and we also of course support popular/regular FPGA dev boards :) Most of the peripherals present are generally supported: DRAM, UART, Ethernet, SPI-Flash, SDCard, PCIe, SATA, etc... making LiteX-Boards' targets hopefully a good base infrastructure to create your own custom SoCs! > **Note:** All boards with >= 32MB of memory and enough logic can be considered as Linux Capable, have a look at [Linux-on-LiteX-Vexriscv](https://github.com/litex-hub/linux-on-litex-vexriscv) project to try Linux on your FPGA board!

Some of the suported boards, see yours? Give LiteX-Boards a try!

[> Boards list --------------- ├── adi_adrv2crr_fmc ├── adi_plutosdr ├── alchitry_au ├── alchitry_cu ├── alchitry_mojo ├── aliexpress_xc7k420t ├── aliexpress_xc7k70t ├── alinx_ax7010 ├── alinx_axu2cga ├── analog_pocket ├── antmicro_artix_dc_scm ├── antmicro_datacenter_ddr4_test_board ├── antmicro_lpddr4_test_board ├── antmicro_sdi_mipi_video_converter ├── arduino_mkrvidor4000 ├── avalanche ├── avnet_aesku40 ├── berkeleylab_marblemini ├── berkeleylab_marble ├── camlink_4k ├── colognechip_gatemate_evb ├── colorlight_5a_75b ├── colorlight_5a_75e ├── colorlight_i5 ├── decklink_intensity_pro_4k ├── decklink_mini_4k ├── decklink_quad_hdmi_recorder ├── digilent_arty ├── digilent_arty_s7 ├── digilent_arty_z7 ├── digilent_atlys ├── digilent_basys3 ├── digilent_cmod_a7 ├── digilent_genesys2 ├── digilent_nexys4ddr ├── digilent_nexys4 ├── digilent_nexys_video ├── digilent_pynq_z1 ├── digilent_zedboard ├── digilent_zybo_z7 ├── ebaz4205 ├── efinix_t8f81_dev_kit ├── efinix_titanium_ti60_f225_dev_kit ├── efinix_trion_t120_bga576_dev_kit ├── efinix_trion_t20_bga256_dev_kit ├── efinix_trion_t20_mipi_dev_kit ├── efinix_xyloni_dev_kit ├── ego1 ├── enclustra_mercury_kx2 ├── enclustra_mercury_xu5 ├── fairwaves_xtrx ├── fpc_iii ├── fpgawars_alhambra2 ├── gadgetfactory_papilio_pro ├── gsd_butterstick ├── gsd_orangecrab ├── hackaday_hadbadge ├── hseda_xc7a35t ├── icebreaker_bitsy ├── icebreaker ├── ice_v_wireless ├── isx_im1283 ├── jungle_electronics_fireant ├── kosagi_fomu_evt ├── kosagi_fomu_hacker ├── kosagi_fomu_pvt ├── kosagi_netv2 ├── krtkl_snickerdoodle ├── lambdaconcept_ecpix5 ├── lambdaconcept_pcie_screamer_m2 ├── lambdaconcept_pcie_screamer ├── lattice_certuspro_nx_evn ├── lattice_crosslink_nx_evn ├── lattice_crosslink_nx_vip ├── lattice_ecp5_evn ├── lattice_ecp5_vip ├── lattice_ice40up5k_evn ├── lattice_machxo3 ├── lattice_versa_ecp5 ├── limesdr_mini_v2 ├── linsn_rv901t ├── litex_acorn_baseboard ├── logicbone ├── machdyne_konfekt ├── machdyne_kopflos ├── machdyne_krote ├── machdyne_lakritz ├── machdyne_minze ├── machdyne_mozart_ml1 ├── machdyne_mozart_ml2 ├── machdyne_mozart_mx1 ├── machdyne_noir ├── machdyne_schoko ├── machdyne_vanille ├── machdyne_vivaldi_ml1 ├── marblemini ├── marble ├── micronova_mercury2 ├── mist ├── mnt_rkx7 ├── muselab_icesugar_pro ├── muselab_icesugar ├── myminieye_runber ├── newae_cw305 ├── numato_aller ├── numato_mimas_a7 ├── numato_nereid ├── numato_tagus ├── ocp_tap_timecard ├── olimex_gatemate_a1_evb ├── opalkelly_xem8320 ├── pano_logic_g2 ├── qmtech_10cl006 ├── qmtech_5cefa2 ├── qmtech_artix7_fbg484 ├── qmtech_artix7_fgg676 ├── qmtech_ep4ce15_starter_kit ├── qmtech_ep4cex5 ├── qmtech_ep4cgx150 ├── qmtech_kintex7_devboard ├── qmtech_wukong ├── qmtech_xc7a35t ├── quicklogic_quickfeather ├── qwertyembedded_beaglewire ├── radiona_ulx3s ├── radiona_ulx4m_ld_v2 ├── rcs_arctic_tern_bmc_card ├── redpitaya ├── rz_easyfpga ├── saanlima_pipistrello ├── scarabhardware_minispartan6 ├── seeedstudio_spartan_edge_accelerator ├── siglent_sds1104xe ├── sipeed_tang_nano_20k ├── sipeed_tang_nano_4k ├── sipeed_tang_nano_9k ├── sipeed_tang_nano ├── sipeed_tang_mega_138k_pro ├── sipeed_tang_primer_20k ├── sipeed_tang_primer_25k ├── sipeed_tang_primer ├── sitlinv_a_e115fb ├── sitlinv_stlv7325 ├── sitlinv_xc7k420t ├── sqrl_acorn ├── sqrl_fk33 ├── sqrl_xcu1525 ├── terasic_de0nano ├── terasic_de10lite ├── terasic_de10nano ├── terasic_de1soc ├── terasic_de2_115 ├── terasic_deca ├── terasic_sockit ├── tinyfpga_bx ├── trellisboard ├── trenz_c10lprefkit ├── trenz_cyc1000 ├── trenz_max1000 ├── trenz_te0725 ├── trenz_tec0117 ├── tul_pynq_z2 ├── xilinx_ac701 ├── xilinx_alveo_u200 ├── xilinx_alveo_u250 ├── xilinx_alveo_u280 ├── xilinx_kc705 ├── xilinx_kcu105 ├── xilinx_kv260 ├── xilinx_sp605 ├── xilinx_vc707 ├── xilinx_vcu118 ├── xilinx_zc706 ├── xilinx_zcu102 ├── xilinx_zcu104 ├── xilinx_zcu106 ├── xilinx_zcu216 └── ztex213