131 lines
4.5 KiB
Python
131 lines
4.5 KiB
Python
from litex.build.generic_platform import *
|
|
from litex.build.lattice import LatticeiCE40Platform
|
|
from litex.build.lattice.programmer import IceStormProgrammer
|
|
|
|
|
|
_io = [
|
|
# Clk
|
|
("clk12", 0, Pins("35"), IOStandard("LVCMOS33")),
|
|
|
|
# LEDs
|
|
("user_led_n", 0, Pins("39"), IOStandard("LVCMOS33")),
|
|
("rgb_led", 0,
|
|
Subsignal("r", Pins("41")),
|
|
Subsignal("g", Pins("40")),
|
|
Subsignal("b", Pins("39")),
|
|
IOStandard("LVCMOS33")
|
|
),
|
|
|
|
# Buttons
|
|
("user_sw", 0, Pins("23"), IOStandard("LVCMOS33")),
|
|
("user_sw", 1, Pins("25"), IOStandard("LVCMOS33")),
|
|
("user_sw", 2, Pins("34"), IOStandard("LVCMOS33")),
|
|
("user_sw", 3, Pins("43"), IOStandard("LVCMOS33"))
|
|
]
|
|
|
|
spiflash = [
|
|
# Only usable in PROG FLASH mode and J7 attached (see PCB silkscreen).
|
|
("spiflash", 0,
|
|
Subsignal("cs_n", Pins("16"), IOStandard("LVCMOS33")),
|
|
Subsignal("clk", Pins("15"), IOStandard("LVCMOS33")),
|
|
Subsignal("mosi", Pins("14"), IOStandard("LVCMOS33")),
|
|
Subsignal("miso", Pins("17"), IOStandard("LVCMOS33")),
|
|
),
|
|
]
|
|
|
|
serial = [
|
|
("serial", 0,
|
|
Subsignal("tx", Pins("J3:0")),
|
|
Subsignal("rx", Pins("J3:1")),
|
|
IOStandard("LVCMOS33")
|
|
),
|
|
("serial", 1,
|
|
Subsignal("tx", Pins("J3:2")),
|
|
Subsignal("rx", Pins("J3:3")),
|
|
IOStandard("LVCMOS33")
|
|
)
|
|
]
|
|
|
|
|
|
_connectors = [
|
|
# Many pins on the AARDVARK, PMOD, J52/HEADER A, and J2/HEADER B connectors
|
|
# are multiplexed with other I/O or connector pins. For completeness, all
|
|
# pins are exposed here except Vdd, NC, and GND. Pin order is as specified
|
|
# on the schematic (except for PMOD, which uses Digilent's numbering).
|
|
|
|
# AARDVARK connector omitted- although sysCONFIG pins are exposed on this
|
|
# header (which can be used as GPIO), it is meant for flashing using an
|
|
# external programmer rather than as an I/O port.
|
|
|
|
# PMOD connector shares pins with sysCONFIG- make sure to remove jumper
|
|
# J7 if using the PMOD. TODO: Perhaps it would be better to split into two
|
|
# single 6-pin PMODs.
|
|
#
|
|
# PMOD pinout (using ICE40 pin names):
|
|
# 1, 2, 3, 4- SPI_SS, SPI_SI, SPI_SO, SPI_SCK
|
|
# 5, 6, 7, 8- Free
|
|
("PMOD", "16 17 14 15 27 26 32 31"),
|
|
#Silk: SS MOSI MISO SCK 38B 39A 43A 42B
|
|
|
|
# J52 exposes LEDs and sysCONFIG pins (yet again). Make sure to remove
|
|
# jumper J7 if using the PMOD. Pin order is as follows (right to left):
|
|
# 12 10 8 6 4 2
|
|
# 11 9 7 5 3 1
|
|
#
|
|
# J52's pinout (using ICE40 pin names for SPI flash):
|
|
# 1, 2- Vdd
|
|
# 3, 4- rgb_led.b, SPI_SI
|
|
# 5, 6- rgb_led.g, SPI_SO
|
|
# 7, 8- GND, SPI_SCK
|
|
# 9, 10- rgb_led.r, SPI_SS
|
|
# 11, 12- GND
|
|
# 3 4 5 6 8 9 10
|
|
("J52", "39 17 40 14 15 41 16"),
|
|
|
|
# Pin order of J2, and J3 are as follows (left to right/top to bottom):
|
|
# 2 4 6 8 10 12 14 16 18 20
|
|
# 1 3 5 7 9 11 13 15 17 19
|
|
#
|
|
# J2's pinout is shared by many things. Entire pinout listed follows:
|
|
# 1, 2- Vdd
|
|
# 3, 4- user_sw0, NC
|
|
# 5, 6- user_sw1, NC
|
|
# 7, 8- PMOD D5, Free
|
|
# 9, 10- PMOD D4, Free
|
|
# 11, 12- PMOD D6, Free
|
|
# 13, 14- PMOD D7, Free
|
|
# 15, 16- Free, 12.00 clock
|
|
# 17, 18- user_sw2, GND
|
|
# 19, 20- user_sw3, GND
|
|
# 3 5 7 8 9 10 11 12 13 14 15 16 17 19
|
|
("J2", "23 25 26 36 27 42 32 38 31 28 37 35 34 43"),
|
|
# Silk:37A 36B 39A 48B 38B 51A 43A 50B 42B 41A 45A_G1 ICE_CLK 44B 49A
|
|
# index: 0 1 2 3 4 5 6 7 8 9 10 11 12 13
|
|
|
|
# Bank2: 4 3 48 45 47 44 46 2
|
|
# Bank1: 12 21 13 20 19 18 11 10 9 6
|
|
# J3's pinout is all Free, except 1 (Vdd) and 19 (GND).
|
|
# 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 20
|
|
("J3", "12 4 21 3 13 48 20 45 19 47 18 44 11 46 10 2 9 6"),
|
|
# Silk:22A 8A 23B 9B 24A 4A 25B_G3 5B 29B 2A 31B 3B_G6 20A 0A 18A 6A 16A 13B
|
|
# index: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
|
|
]
|
|
|
|
|
|
class Platform(LatticeiCE40Platform):
|
|
default_clk_name = "clk12"
|
|
default_clk_period = 1e9/12e6
|
|
|
|
def __init__(self, toolchain="icestorm"):
|
|
LatticeiCE40Platform.__init__(self, "ice40-up5k-sg48", _io, _connectors, toolchain=toolchain)
|
|
self.add_extension(serial)
|
|
self.add_extension(spiflash)
|
|
|
|
def create_programmer(self):
|
|
return IceStormProgrammer()
|
|
|
|
def do_finalize(self, fragment):
|
|
LatticeiCE40Platform.do_finalize(self, fragment)
|
|
self.add_period_constraint(self.lookup_request("clk12", loose=True), 1e9/12e6)
|
|
|