From d0c9838dca52a762a5b9b988006a09a853794442 Mon Sep 17 00:00:00 2001
From: Florent Kermarrec <florent@enjoy-digital.fr>
Date: Fri, 10 Oct 2014 15:15:58 +0200
Subject: [PATCH] uart2wishbone: share UARTRX and UARTTX with MiSoC

---
 miscope/mila.py          |   6 +--
 miscope/uart2wishbone.py | 103 ++-------------------------------------
 2 files changed, 6 insertions(+), 103 deletions(-)

diff --git a/miscope/mila.py b/miscope/mila.py
index 5d74f3175..9fa3637ef 100644
--- a/miscope/mila.py
+++ b/miscope/mila.py
@@ -1,9 +1,9 @@
-from migen.fhdl.structure import *
+from migen.fhdl.std import *
 from migen.fhdl import verilog
 from migen.bank.description import *
+from migen.actorlib.fifo import AsyncFIFO
 
 from miscope.std import *
-from migen.actorlib.fifo import AsyncFIFO
 from miscope.trigger import Trigger
 from miscope.storage import Recorder, RunLengthEncoder
 
@@ -19,7 +19,7 @@ class MiLa(Module, AutoCSR):
 		self.sink = Record(dat_layout(width))
 
 		if clk_domain is not "sys":
-			fifo = AsyncFIFO([("dat", width)], 32) # FIXME: reduce this
+			fifo = AsyncFIFO([("dat", width)], 32)
 			self.submodules += RenameClockDomains(fifo, {"write": clk_domain, "read": "sys"})
 			self.comb += [
 				fifo.sink.stb.eq(self.sink.stb),
diff --git a/miscope/uart2wishbone.py b/miscope/uart2wishbone.py
index 0576b2581..f75a85743 100644
--- a/miscope/uart2wishbone.py
+++ b/miscope/uart2wishbone.py
@@ -1,111 +1,14 @@
-from migen.fhdl.structure import *
-from migen.fhdl.module import *
+from migen.fhdl.std import *
 from migen.genlib.record import *
-from migen.genlib.cdc import MultiReg
 from migen.genlib.fsm import FSM, NextState
-from migen.genlib.misc import split, displacer, chooser
+from migen.genlib.misc import chooser
 from migen.bank.description import *
 from migen.bus import wishbone
-from migen.flow.actor import Sink, Source
 
-class UARTRX(Module):
-	def __init__(self, pads, tuning_word):
-		self.source = Source([("d", 8)])
-
-		###
-
-		uart_clk_rxen = Signal()
-		phase_accumulator_rx = Signal(32)
-
-		rx = Signal()
-		self.specials += MultiReg(pads.rx, rx)
-		rx_r = Signal()
-		rx_reg = Signal(8)
-		rx_bitcount = Signal(4)
-		rx_busy = Signal()
-		rx_done = self.source.stb
-		rx_data = self.source.payload.d
-		self.sync += [
-			rx_done.eq(0),
-			rx_r.eq(rx),
-			If(~rx_busy,
-				If(~rx & rx_r, # look for start bit
-					rx_busy.eq(1),
-					rx_bitcount.eq(0),
-				)
-			).Else(
-				If(uart_clk_rxen,
-					rx_bitcount.eq(rx_bitcount + 1),
-					If(rx_bitcount == 0,
-						If(rx, # verify start bit
-							rx_busy.eq(0)
-						)
-					).Elif(rx_bitcount == 9,
-						rx_busy.eq(0),
-						If(rx, # verify stop bit
-							rx_data.eq(rx_reg),
-							rx_done.eq(1)
-						)
-					).Else(
-						rx_reg.eq(Cat(rx_reg[1:], rx))
-					)
-				)
-			)
-		]
-		self.sync += \
-				If(rx_busy,
-					Cat(phase_accumulator_rx, uart_clk_rxen).eq(phase_accumulator_rx + tuning_word)
-				).Else(
-					Cat(phase_accumulator_rx, uart_clk_rxen).eq(2**31)
-				)
-
-class UARTTX(Module):
-	def __init__(self, pads, tuning_word):
-		self.sink = Sink([("d", 8)])
-
-		###
-
-		uart_clk_txen = Signal()
-		phase_accumulator_tx = Signal(32)
-
-		pads.tx.reset = 1
-
-		tx_reg = Signal(8)
-		tx_bitcount = Signal(4)
-		tx_busy = Signal()
-		self.sync += [
-			self.sink.ack.eq(0),
-			If(self.sink.stb & ~tx_busy & ~self.sink.ack,
-				tx_reg.eq(self.sink.payload.d),
-				tx_bitcount.eq(0),
-				tx_busy.eq(1),
-				pads.tx.eq(0)
-			).Elif(uart_clk_txen & tx_busy,
-				tx_bitcount.eq(tx_bitcount + 1),
-				If(tx_bitcount == 8,
-					pads.tx.eq(1)
-				).Elif(tx_bitcount == 9,
-					pads.tx.eq(1),
-					tx_busy.eq(0),
-					self.sink.ack.eq(1),
-				).Else(
-					pads.tx.eq(tx_reg[0]),
-					tx_reg.eq(Cat(tx_reg[1:], 0))
-				)
-			)
-		]
-		self.sync += [
-				If(tx_busy,
-					Cat(phase_accumulator_tx, uart_clk_txen).eq(phase_accumulator_tx + tuning_word)
-				).Else(
-					Cat(phase_accumulator_tx, uart_clk_txen).eq(0)
-				)
-		]
+from misoclib.uart import UARTRX, UARTTX
 
 class UART(Module, AutoCSR):
 	def __init__(self, pads, clk_freq, baud=115200):
-
-		# Tuning word value
 		self._tuning_word = CSRStorage(32, reset=int((baud/clk_freq)*2**32))
 		tuning_word = self._tuning_word.storage