[> 2022.04, released on XXX ---------------------------------------- [> Issues resolved ------------------ - software/bios/mem_write: Fix write address increment. [> Added Features ----------------- - litex_setup: Add minimal/standard/full install configs. - soc/arguments: Improve default/help, add parser groups. - LiteSPI/phy: Simplify integration on targets. - openocd/stream: Simplify ECP5 JTAG-UART/JTAGBone use. - tools/litex_cli: Allow passing reg name to --read/--write. - soc/add_spi_sdcard: Allow optional Tristate (useful on ULX3S). - software/bios: Add new mem_cmd memory comparison commmand. - cpu/rocket: Increase IRQ lines to 8. - cpu/serv: Add MDU support. - cpu/marocchino: Add initial support. - cpu/eos_s3: Add LiteX BIOS/Bare Metal software support. - litex_sim: Add .json support for --rom/ram/sdram-init. - soc/add_uart: Allow multiple UARTs in the same design. - cores/cpu: Add out-of-tree support. [> API changes/Deprecation -------------------------- - Fully deprecate SoCSDRAM/SPIFlash core (replaced by LiteSPI). - UART "bridge" name deprecated in favor of "crossover" (already supported). - "external" CPU class support deprecated (replaced by out-of-tree support). - lxterm/lxserver/lxsim short names deprecated (used long litex_xy names). [> 2021.12, released on January 5th 2022 ---------------------------------------- [> Issues resolved ------------------ - software/linker: Fix initialized global variables. - build/xilinx: Fix Ultrascale SDROutput/Input. - cpu/rocket/crt0.s: Fix alignements. - core/video: Fix missing ClockDomainsRenamer in specific DRAM's width case. - mor1kx: Fix --cpu-type=None --with-ethernet case. - build/lattice: Fix LatticeiCE40SDROutputImpl. - soc/interconnect/axi: Fix 4KB bursts. [> Added Features ----------------- - integration/builder: Check if full software re-build is required when a CPU is used. - cores/clock: Add Gowin PLL support. - build/gowin: Add initial HyperRam support. - build/gowin: Add differential Input/Output support. - build/lattice: Add DDRTristate support. - cores/gpio: Add external Tristate support. - tools/json2dts: Make it more generic (now also used with OpenRisc/Mor1kx). - cpu/rocket: Add SMP support (up to quad-core). - software/bios/boot: Allow frame reception to time out (for litex_term auto-calibration). - tools/litex_term: Add automatic settings calibration and --safe mode. - build/quicklogic: Add initial support. - cores/icap/7-Series: Add register read capability. - cores/video: Add RGB565 support to VideoFrameBuffer. - soc: Raise custom SoCError Exception and disable traceback/exception. - soc/add_pcie: Automatically set Endpoint's endianness to PHY's endianness. - build/efinix: Add initial Trion and Titanium support. - fhdl/verilog: Cleanup/Simplify verilog generation. - fhdl/memory: Cleanup/Simplify and add support for Efinix case. - cpu/ibex: Add interrupt support. - tools/litex_client: Add --length parameter for MMAP read accesses. - software/bios/cpu: Add CPU tests in CI. - litex_sim/xgmii_ethernet: Improve models. - litex_setup: Cleanup/Simplify and switch to proper "--" commands (with retro-compat). - cores/jtag: Add ECP5 support. - cores/led: Add WS2812/NeoPixel core. - cpu/femtorv: Finish integration and add variants support. - cpu/eos-s3: Add initial support. - build/anlogic: Add initial support. - cpu/microwatt: Add Xilinx multiplier support. - cpu/vexriscv/cfu: Improve integration. - soc/interconnect: Add initial AHB support (AHB2Wishbone). - cpu/gowin_emcu: Add initial Gowin EMCU support. - cpu/zynq7000: Add initial BIOS/software support. - cpu/zynq7000: Add TCL support. - core/prbs: Add error behaviour configuration on saturation. - software/bios: Add write size option to mem_write cmd. - LitePCIe/phy: Cleanup 7-Series PHY integration. - LitePCIe/dma Add LitePCIeDMAStatus module. - LitePCIe/software: Improve kernel/user-space utilities. - LiteDRAM/litedram_gen: Improve ECP5 support. - LiteDRAM/phy: Add initial LPDDR5 support. - LiteDRAM/frontend: Refactor DRAM FIFO and add optional bypass mode. - LiteEth/core: Add 32-bit/64-bit datapath support. - LiteEth/phy: Add 10Gbps / Xilinx XGMII support. - LiteEth/phy: Add 1Gbps / Efinix RGMII support. - LiteSPI/phy: Simplify SDR/DDR PHYs. - LiteHyperBus: Add 16-bit support. [> API changes/Deprecation -------------------------- - software: Replace libbase with picolibc (new requirements: meson/ninja). - amaranth: Switch from nMigen to Amaranth HDL. [> 2021.08, released on September 15th 2021 ------------------------------------------- [> Issues resolved ------------------ - wishbone/UpConverter: Fix SEL propagation. - cores/i2s: Fix SYNC sampling. - BIOS/lib*: Fix GCC warnings. - cpu/software: Fix stack alignment issues. - cpu/blackparrot: Fix integration. - interconnect/axi: Fix valid signal in connect_to_pads for axi lite. - software/hw/common: Fix _csr_rd_buf/_csr_wr_buf for sizeof(buf[0]) < CSR_DW_BYTES case. - software/soc.h: Fix interoperability with assembly. - interconnect/stream: Fix n=1 case on Multiplexer/Demultiplexer. - interconnect/axi: Fix BURST_WRAP case on AXIBurst2Beat. - cpu/VexRiscv-SMP: Fix build without a memory bus. - cpu/software: Fix CLANG detection. - build/software: Force a fresh software build when cpu-type/variant is changed. - cores/uart: Fix TX reset level. - BIOS: Fix PHDR link error. - BIOS: Fix build-id link error. - LiteDRAM: Fix Artix7/DDR3 calibraiton at low speed. [> Added Features ----------------- - cores/video: Add 7-Series HDMI PHY over GTPs. - cores/jtagbone: Allow JTAG chain selection. - programmer: Add iCESugar programmer. - cpu/vexriscv: Add CFU support. - soc/controller: Add separate SoC/CPU reset fields. - BIOS/liblitedram: Add debug capabilities, minor improvements. - cpu/femtoRV: Add initial FemtoRV support. - cores/uart: Cleaned-up, Add optional TX-Flush. - cores/usb_ohci: Add initial SpinalHDL's USB OHCI support (integrated in Linux-on-LiteX-Vexriscv). - stream: Add Gate Module. - soc/builder: Allow linking external software packages. - soc/software: Allow registering init functions. - cores/ram: Add init support to Nexus LRAM. - cores/spi: Add Manual CS Mode for bulk transfers. - cores/VexRiscv-SMP: Make [ID]TLB size configurable. - dts: Add GPIO IRQ support. - programmer/DFUProg: Allow to specify alt interace and to not reboot. - cores/clock/ecp5: Add dynamic phase adjustment signals. - tools/litex_sim: Mode SDRAM settings to LiteDRAM's DFI model. - build/gowin: Add AsyncResetSynchronizer/DDRInput/DDROutput implementations. - build/gowin: Add On-Chip-Oscillator support. - build/gowin: Add initial timing constraints support. - build/attr_translate: Simplify/Cleanup. - programmer/OpenFPGALoader: Add cable and freq options. - interconnect/packet: Improve PacketFIFO to handle payload/param separately. - clock/ecp5: Add 4-output support. - LiteSPI: Simplified/Cleaned-up, new MMAP architecture, applied to LiteX-Boards. - soc: Add LiteSPI integration code. - LitePCIe: DMA/Controller Simplified/Cleaned-up. - soc/add_cpu: Add memory mapping overrides to build log and make an exception for the CPUNone case. - programmer: Add ECPprogProgrammer. - soc/software: Add Random access option to memtest. - tools: Add Renode generator script. - tools: Add Zephyr DTS generator script. - build/io: Add DDRTristate. - cpu/VexRiscv: Restructure config flags for dcache/icache presence. - litex_sim: Improve RAM/SDRAM integration and make it closer to LiteX-Boards targets. - build/sim: Add ODDR/IDDR/DDRSTristate simulation models. - litex_sim: Add SPIFlash support. - LiteSPI: Add DDR support and integration in LiteX (rate=1:1, 1:2). - build/Vivado: Make pre_synthesis/placement/routing commands similar to platform_commands. - LiteDRAM: Refactor C code generator. - LiteDRAM: Improve LPDDR4 support. - LiteDRAM: Reduce ECC granularity. [> API changes/Deprecation -------------------------- - soc_core: --integrated-rom-file argument renamed to --integrated-rom-init. [> 2021.04, released on May 3th 2021 ------------------------------------ [> Issues resolved ------------------ - litex_term: Fix Windows/OS-X support. - soc/USB-ACM: Fix reset clock domain. - litex_json2dts: Various fixes/improvements. - cores/clock: Fix US(P)IDELAYCTRL reset sequence. - cpu/Vexriscv: Fix Lite variant ABI (has multiplier so can use rv32im). - BIOS: Fix various compiler warnings. - LiteSDCard: Fix various issues, enable multiblock reads/writes and improve performance. - CSR: Fix address wrapping within a CSRBank. - soc/add_etherbone: Fix UDPIPCore clock domain. - stream/Gearbox: Fix some un-supported cases. - cpu/VexRiscv-SMP: Fix build on Intel/Altera devices with specific RAM implementation. - timer: Fix AutoDoc. - Microwatt/Ethernet: Fix build. - soc/software: Link with compiler instead of ld. [> Added Features ----------------- - Lattice-NX: Allow up to 320KB RAMs. - BIOS: Allow compilation with UART disabled. - litex_json2dts: Simplify/Improve and allow VexRiscv/Mor1kx support. - BIOS/i2c: Improve cmd_i2c. - BIOS/liblitedram: Various improvements for DDR4/LPDDR. - cores/Timer: Add initial unit test. - cores: Add initial JTAGBone support on Xilinx FPGAs. - litex_term: Improve JTAG-UART support. - litex_server: Add JTAGBone support. - VexRiscv-SMP: Add --without-out-of-order and --with-wishbone-memory capabilities. - BIOS: Allow specify TRIPLE with LITEX_ENV_CC_TRIPLE. - litex_client: Add simple --read/--write support. - OpenFPGALoader: Add flash method. - litex_sim: Add GTKWave savefile generator. - litex_term: Add nios2-terminal support. - cpu/mor1kx: Add initial SMP support. - interconnect/axi: Add tkeep support. - cores/gpio: Add IRQ support to GPIOIn. - cpu: Add initial lowRISC's Ibex support. - build/xilinx/Vivado: Allow tcl script to be added as ip. - cores/uart: Rewrite PHYs to reduce resource usage and improve readability. - cores/pwm: Add configurable default enable/width/period values. - cores/leds: Add optional dimming (through PWM). - soc/add_pcie: Allow disabling MSI when not required. - export/svd: Add constants to SVD export. - BIOS: Allow dynamic Ethernet IP address. - BIOS: Add boot command to boot from memory. - cores: Add simple VideoOut core with Terminal, ColorBards, Framebuffer + various PHYs (VGA, DVI, HDMI, etc...). - csr/EventSourceProcess: Add rising edge support and edge selection. - soc/integration: Cleanup/Simplify soc_core/builder. - soc/integrated_rom: Add automatic BIOS ROM resize to minimize blockram usage and improve flexibility. - interconnect/axi: Add AXILite Clock Domain Crossing. - cores/xadc: Add Ultrascale support. - soc/add_ethernet: Allow nrxslots/ntxslots configuration. - cpu/VexRiscv-SMP: Integrate FPU/RVC support. - soc/add_csr: Add auto-allocation mode and switch to it in LiteX's code base. - soc/BIOS: Add method to check BIOS requirements during the build and improve error message when not satisfied. - LiteEth: Add initial timestamping support. - litex_client: Add optional filter to --regs. - LiteDRAM: Add LPDDR4 support. - BIOS/netboot: Allow specifying .json file. - cores/clock: Add initial Gowin GW1N PLL support. - LiteSDCard: Add IRQ support. [> API changes/Deprecation -------------------------- - platforms/targets: Move all platforms/targets to https://github.com/litex-hub/litex-boards. - litex_term: Remove flashing capability. - cores/uart: Disable dynamic baudrate by default (Unused and save resources). [> 2020.12, released on December 30th 2020 ------------------------------------------ [> Issues resolved ------------------ - fix SDCard writes. - fix crt0 .data initialize on SERV/Minerva. - fix Zynq7000 AXI HP Slave integration. [> Added Features ------------------ - Wishbone2CSR: Add registered version and use it on system with SDRAM. - litex_json2dts: Add Mor1kx DTS generation support. - Build: Add initial Radiant support for NX FPGA family. - SoC: Allow ROM to be optionally writable (for contents overwrite over UARTBone/Etherbone). - LiteSDCard: Improve BIOS support. - UARTBone: Add clock domain support. - Clocking: Uniformize reset on iCE40PLL/ECP5PLL. - LiteDRAM: Improve calibration and add BIOS debug commands. - Clocking: Add initial Ultrascale+ support. - Sim: Allow dynamic enable/disable of tracing. - BIOS: Improve memtest and report. - BIOS: Rename/reorganize commands. - litex_server: Simplify usage with PCIe and add debug parameter. - LitePCIe: Add Ultrascale(+) support up to Gen3 X16. - LiteSATA: Add BIOS/Boot integration. - Add litex_cli to provides common RemoteClient functions: get identifier, dump regs, etc... - LiteDRAM: Simplify BIST integration. - Toolchains/Programmers: Improve checks/error reporting. - BIOS: add leds command. - SoC: Do a full reset of the SoC on reboot (not only the CPU). - Etherbone: Improve efficiency/performance. - LiteDRAM: Improve DDR4/DDR3 calibration. - Build: Add initial Oxide support for NX FPGA family. - Clock/RAM: Reorganize for better modularity. - SPI-OPI: Various improvements for Betrusted. - litex_json2dts: Improvements to use it with mor1kx and VexRiscv-SMP. - Microwatt: Add IRQ support. - BIOS: Add i2c_scan command. - Builder: Simplify Documentation generation with --doc args on targets. - CSR: Add documentation to EventManager registers. - BIOS: Allow disabling timestamp for reproducible builds. - Symbiflow: Remove workarounds on targets. - litex_server: Simplify use on PCIe, allow direct CommXY use in scripts to bypass litex_server. - Zynq7000: Improve PS7 configuration support (now supporting .xci/preset/dict) - CV32E40P: Improve OBI efficiency. - litex_term: Improve upload speed with CRC check enabled, deprecate --no-crc (no longer useful). - BIOS: Add mem_list command to list available memory and use mem_xy commands on them. - litex_term: Add Crossover and JTAG_UART support. - Software: Add minimal bare metal demo app. - UART: Add Crossover+Bridge support. - VexRiscv-SMP: Integrate AES support. - LitePCIe: Allow AXI mastering from FPGA (AXI-Lite and Full). - mor1kx: Add standard+fpu and linux+fpu variants. [> API changes/Deprecation -------------------------- - BIOS: commands have been renamed/reorganized. - LiteDRAM: rdcmdphase/wrcmdphase no longer exposed. - CSR: change default csr_data_width from 8 to 32. [> 2020.08, released on August 7th 2020 --------------------------------------- [> Issues resolved ------------------ - Fix flush_cpu_icache on VexRiscv. - Fix `.data` section placed in rom (#566) [> Added Features ------------------ - Properly integrate Minerva CPU. - Add nMigen dependency. - Pluggable CPUs. - BIOS history, autocomplete. - Improve boards's programmers. - Add Microwatt CPU support (with GHDL-Yosys-plugin support for FOSS toolchains). - Speedup Memtest using an LFSR. - Add LedChaser on boards. - Improve WishboneBridge. - Improve Diamond constraints. - Use InterconnectPointToPoint when 1 master,1 slave and no address translation. - Add CV32E40P CPU support (ex RI5CY). - JTAG UART with uart_name=jtag_uart (validated on Spartan6, 7-Series, Ultrascale(+)). - Add Symbiflow experimental support on Arty. - Add SDCard (SPI and SD modes) boot from FAT/exFAT filesystems with FatFs. - Simplify boot with boot.json configuration file. - Revert to a single crt0 (avoid ctr/xip variants). - Add otional DMA bus for Cache Coherency on CPU(s) with DMA/Cache Coherency interface. - Add AXI-Lite bus standard support. - Add VexRiscv SMP CPU support. [> API changes/Deprecation -------------------------- - Add --build --load arguments to targets. - Deprecate soc.interconnect.wishbone.UpConverter (will be rewritten if useful). - Deprecate soc.interconnect.wishbone.CSRBank (Does not seem to be used by anyone). - Move soc.interconnect.wishbone2csr.WB2CSR to soc.interconnect.wishbone.Wishbone2CSR. - Move soc.interconnect.wishbonebridge.WishboneStreamingBridge to soc.cores.uart.Stream2Wishbone. - Rename --gateware-toolchain target parameter to --toolchain. - Integrate Zynq's PS7 as a regular CPU (zynq7000) and deprecate SoCZynq. [> 2020.04, released on April 28th, 2020 ---------------------------------------- [> Description -------------- First release of LiteX and the ecosystem of cores! LiteX is a Migen/MiSoC based Core/SoC builder that provides the infrastructure to easily create Cores/SoCs (with or without CPU). The common components of a SoC are provided directly: - Buses and Streams (Wishbone, AXI, Avalon-ST) - Interconnect - Common cores (RAM, ROM, Timer, UART, etc...) - CPU wrappers/integration - etc... And SoC creation capabilities can be greatly extended with the ecosystem of LiteX cores (DRAM, PCIe, Ethernet, SATA, etc...) that can be integrated/simulated/build easily with LiteX. It also provides build backends for open-source and vendors toolchains. [> Issues resolved ------------------ - NA [> Added Features ------------------ - NA [> API changes/Deprecation -------------------------- - https://github.com/enjoy-digital/litex/pull/399: Converting LiteX to use Python modules.