from migen.fhdl.structure import * from migen.fhdl.module import Module from migen.flow.actor import * from migen.genlib.buffers import ReorderBuffer class SequentialReader(Module): def __init__(self, port): assert(len(port.slots) == 1) self.address = Sink([("a", port.hub.aw)]) self.data = Source([("d", port.hub.dw)]) self.busy = Signal() ### sample = Signal() data_reg_loaded = Signal() data_reg = Signal(port.hub.dw) accept_new = Signal() # We check that len(port.slots) == 1 # and therefore we can assume that port.ack # goes low until the data phase. self.comb += [ self.busy.eq(~data_reg_loaded | ~port.ack), port.adr.eq(self.address.payload.a), port.we.eq(0), accept_new.eq(~data_reg_loaded | self.data.ack), port.stb.eq(self.address.stb & accept_new), self.address.ack.eq(port.ack & accept_new), self.data.stb.eq(data_reg_loaded), self.data.payload.d.eq(data_reg) ] self.sync += [ If(self.data.ack, data_reg_loaded.eq(0)), If(sample, data_reg_loaded.eq(1), data_reg.eq(port.dat_r) ), sample.eq(port.get_call_expression()) ] class OOOReader(Module): def __init__(self, port): assert(len(port.slots) > 1) self.address = Sink([("a", port.hub.aw)]) self.data = Source([("d", port.hub.dw)]) self.busy = Signal() # TODO: drive busy ### tag_width = len(port.tag_call) data_width = port.hub.dw depth = len(port.slots) rob = ReorderBuffer(tag_width, data_width, depth) self.submodules += rob self.comb += [ port.adr.eq(self.address.payload.a), port.we.eq(0), port.stb.eq(self.address.stb & rob.can_issue), self.address.ack.eq(port.ack & rob.can_issue), rob.issue.eq(self.address.stb & port.ack), rob.tag_issue.eq(port.base + port.tag_issue), rob.data_call.eq(port.dat_r), self.data.stb.eq(rob.can_read), rob.read.eq(self.data.ack), self.data.payload.d.eq(rob.data_read) ] self.sync += [ # Data is announced one cycle in advance. # Register the call to synchronize it with the data signal. rob.call.eq(port.call), rob.tag_call.eq(port.tag_call) ] class SequentialWriter(Module): def __init__(self, port): assert(len(port.slots) == 1) self.address_data = Sink([("a", port.hub.aw), ("d", port.hub.dw)]) self.busy = Signal() ### data_reg = Signal(port.hub.dw) self.comb += [ port.adr.eq(self.address_data.payload.a), port.we.eq(1), port.stb.eq(self.address_data.stb), self.address_data.ack.eq(port.ack), port.dat_wm.eq(0) ] self.sync += [ port.dat_w.eq(0), If(port.get_call_expression(), self.busy.eq(0), port.dat_w.eq(data_reg) ), If(self.address_data.stb & self.address_data.ack, self.busy.eq(1), data_reg.eq(self.address_data.payload.d) ) ] class _WriteSlot(Module): def __init__(self, port, load_data, n): self.busy = Signal() ### drive_data = Signal() data_reg = Signal(port.hub.dw) self.comb += [ If(drive_data, port.dat_w.eq(data_reg)), port.dat_wm.eq(0) ] self.sync += [ drive_data.eq(0), If(port.get_call_expression(n), self.busy.eq(0), drive_data.eq(1) ), If(port.stb & port.ack & (port.tag_issue == n), self.busy.eq(1), data_reg.eq(load_data) ), ] class OOOWriter(Module): def __init__(self, port): assert(len(port.slots) > 1) self.address_data = Sink([("a", port.hub.aw), ("d", port.hub.dw)]) self.busy = Signal() ### self.comb += [ port.adr.eq(self.address_data.payload.a), port.we.eq(1), port.stb.eq(self.address_data.stb), self.address_data.ack.eq(port.ack) ] busy = 0 for i in range(len(port.slots)): write_slot = _WriteSlot(port, self.address_data.payload.d, i) #write_slot = _WriteSlot(port, 0x12345678abad1deacafebabedeadbeef, i) self.submodules += write_slot busy = busy | write_slot.busy self.comb += self.busy.eq(busy) def Reader(port): if len(port.slots) == 1: return SequentialReader(port) else: return OOOReader(port) def Writer(port): if len(port.slots) == 1: return SequentialWriter(port) else: return OOOWriter(port)