from mibuild.generic_platform import *
from mibuild.xilinx_ise import XilinxISEPlatform, CRG_SE

_io = [
		("user_btn", 0, Pins("V4"), IOStandard("LVCMOS33"),
			Misc("PULLDOWN"), Misc("TIG")),

		("user_led", 0, Pins("P4"), Misc("SLEW=QUIETIO"), IOStandard("LVCMOS18")),
		("user_led", 1, Pins("L6"), Misc("SLEW=QUIETIO"), IOStandard("LVCMOS18")),
		("user_led", 2, Pins("F5"), Misc("SLEW=QUIETIO"), IOStandard("LVCMOS18")),
		("user_led", 3, Pins("C2"), Misc("SLEW=QUIETIO"), IOStandard("LVCMOS18")),

		("user_dip", 0, Pins("B3"), Misc("PULLDOWN"), IOStandard("LVCMOS33")),
		("user_dip", 1, Pins("A3"), Misc("PULLDOWN"), IOStandard("LVCMOS33")),
		("user_dip", 2, Pins("B4"), Misc("PULLDOWN"), IOStandard("LVCMOS33")),
		("user_dip", 3, Pins("A4"), Misc("PULLDOWN"), IOStandard("LVCMOS33")),

		# TI CDCE913 programmable triple-output PLL
		("clk_y1", 0, Pins("V10"), IOStandard("LVCMOS33")), # default: 40 MHz
		("clk_y2", 0, Pins("K15"), IOStandard("LVCMOS33")), # default: 66 2/3 MHz
		("clk_y3", 0, Pins("C10"), IOStandard("LVCMOS33")), # default: 100 MHz

		# Maxim DS1088LU oscillator, not populated
		("clk_backup", 0, Pins("R8"), IOStandard("LVCMOS33")),

		# TI CDCE913 PLL I2C control
		("pll", 0,
			Subsignal("scl", Pins("P12")),
			Subsignal("sda", Pins("U13")),
			Misc("PULLUP"),
			IOStandard("LVCMOS33")),

		# Micron N25Q128 SPI Flash
		("spiflash", 0,
			Subsignal("clk", Pins("R15")),
			Subsignal("cs_n", Pins("V3")),
			Subsignal("dq", Pins("T13 R13 T14 V14")),
			IOStandard("LVCMOS33")),

		# PMOD extension connectors
		("pmod", 0,
			Subsignal("d", Pins("F15 F16 C17 C18 F14 G14 D17 D18")),
			IOStandard("LVCMOS33")),
		("pmod", 1,
			Subsignal("d", Pins("H12 G13 E16 E18 K12 K13 F17 F18")),
			IOStandard("LVCMOS33")),

		("pmod_diff", 0,
			Subsignal("io", Pins("F15 C17 F14 D17 H12 E16 K12 F17")),
			Subsignal("iob", Pins("F16 C18 G14 D18 G13 E18 K13 F18")),
			IOStandard("LVCMOS33")),

		("serial", 0,
			Subsignal("tx", Pins("T7"), Misc("SLEW=SLOW")),
			Subsignal("rx", Pins("R7"), Misc("PULLUP")),
			IOStandard("LVCMOS33")),

		("ddram_clock", 0,
			Subsignal("p", Pins("G3")),
			Subsignal("n", Pins("G1")),
			IOStandard("MOBILE_DDR")), # actually DIFF_

		# Micron MT46H32M16LFBF-5 LPDDR
		("ddram", 0,
			Subsignal("a", Pins("J7 J6 H5 L7 F3 H4 H3 H6 "
				"D2 D1 F4 D3 G6")),
			Subsignal("ba", Pins("F2 F1")),
			Subsignal("dq", Pins("L2 L1 K2 K1 H2 H1 J3 J1 "
				"M3 M1 N2 N1 T2 T1 U2 U1")),
			Subsignal("cke", Pins("H7")),
			Subsignal("we_n", Pins("E3")),
			Subsignal("cs_n", Pins("K6")), # NC!
			Subsignal("cas_n", Pins("K5")),
			Subsignal("ras_n", Pins("L5")),
			Subsignal("dm", Pins("K3", "K4")),
			Subsignal("dqs", Pins("L4", "P2")),
			Subsignal("rzq", Pins("N4")),
			IOStandard("MOBILE_DDR")),

		# Nat Semi DP83848J 10/100 Ethernet PHY
		# pull-ups on col and rx_data set phy addr to 11111b
		# and prevent isolate mode (addr 00000b)
		("eth_clocks", 0,
			Subsignal("rx", Pins("L15")),
			Subsignal("tx", Pins("H17")),
			IOStandard("LVCMOS33")),

		("eth", 0,
			Subsignal("col", Pins("M18"), Misc("PULLUP")),
			Subsignal("crs", Pins("N17"), Misc("PULLDOWN")),
			Subsignal("mdc", Pins("M16"), Misc("PULLDOWN")),
			Subsignal("mdio", Pins("L18"), Misc("PULLUP")), # 1k5 ext PULLUP
			Subsignal("rst_n", Pins("T18"), Misc("TIG")),
			Subsignal("rx_data", Pins("T17 N16 N15 P18"), Misc("PULLUP")),
			Subsignal("dv", Pins("P17"), Misc("PULLDOWN")), # MII
			Subsignal("rx_er", Pins("N18"), Misc("PULLUP")), # auto MDIX
			Subsignal("tx_data", Pins("K18 K17 J18 J16")),
			Subsignal("tx_en", Pins("L17")),
			Subsignal("tx_er", Pins("L16")), # NC!
			IOStandard("LVCMOS33")),
		]


class Platform(XilinxISEPlatform):
	def __init__(self):
		XilinxISEPlatform.__init__(self, "xc6slx9-2csg324", _io,
				lambda p: CRG_SE(p, "clk_y3", "user_btn"))
		self.add_platform_command("""
CONFIG VCCAUX = "3.3";
""")

	def do_finalize(self, fragment):
		try:
			self.add_platform_command("""
NET "{clk_y3}" TNM_NET = "GRPclky3";
TIMESPEC "TSclky3" = PERIOD "GRPclky3" 10 ns HIGH 50%;
""", clk_y3=self.lookup_request("clk_y3"))
		except ConstraintError:
			pass

		try:
			eth_clocks = self.lookup_request("eth_clocks")
			self.add_platform_command("""
NET "{phy_rx_clk}" TNM_NET = "GRPphy_rx_clk";
NET "{phy_tx_clk}" TNM_NET = "GRPphy_tx_clk";
TIMESPEC "TSphy_rx_clk" = PERIOD "GRPphy_rx_clk" 40 ns HIGH 50%;
TIMESPEC "TSphy_tx_clk" = PERIOD "GRPphy_tx_clk" 40 ns HIGH 50%;
TIMESPEC "TSphy_tx_clk_io" = FROM "GRPphy_tx_clk" TO "PADS" 10 ns;
TIMESPEC "TSphy_rx_clk_io" = FROM "PADS" TO "GRPphy_rx_clk" 10 ns;
""", phy_rx_clk=eth_clocks.rx, phy_tx_clk=eth_clocks.tx)
		except ContraintError:
			pass