From c22ea8fe0aa15dbe2156b00f62f510d448a5a849 Mon Sep 17 00:00:00 2001 From: Clifford Wolf Date: Wed, 1 Jul 2015 08:18:10 +0200 Subject: [PATCH] Spelling fixes by Larry Doolittle --- README.md | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/README.md b/README.md index a0b0937..e61fe54 100644 --- a/README.md +++ b/README.md @@ -25,8 +25,8 @@ PicoRV32 is free and open hardware licensed under the [ISC license](http://en.wi Features and Typical Applications --------------------------------- -- Small (~1000 LUTs in a 7-Series Xilinx FGPA) -- High fMAX (~250 MHz on 7-Series Xilinx FGPAs) +- Small (~1000 LUTs in a 7-Series Xilinx FPGA) +- High fMAX (~250 MHz on 7-Series Xilinx FPGAs) - Selectable native memory interface or AXI4-Lite master - Optional IRQ support (using a simple custom ISA) - Optional Co-Processor Interface @@ -60,11 +60,11 @@ include one or more PicoRV32 cores together with local RAM, ROM, and memory-mapped peripherals, communicating with each other using the native interface, and communicating with the outside world via AXI4. -The optional IRQ feature can be used to react to events from the outside, implemnt +The optional IRQ feature can be used to react to events from the outside, implement fault handlers, or catch instructions from a larger ISA and emulate them in software. -The optional Pico Co-Prosessor Interface (PCPI) can be used to implement +The optional Pico Co-Processor Interface (PCPI) can be used to implement non-branching instructions in an external coprocessor. An implementation of a core that implements the `MUL[H[SU|U]]` instructions is provided. @@ -112,7 +112,7 @@ Simple instruction-level tests from [riscv-tests](https://github.com/riscv/riscv #### dhrystone/ -Another simple test firmware that runs the Dhrystome benchmark. +Another simple test firmware that runs the Dhrystone benchmark. #### scripts/ @@ -165,7 +165,7 @@ Set this to 1 to enable the Pico Co-Processor Interface (PCPI). #### ENABLE_MUL (default = 0) This parameter internally enables PCPI and instantiates the `picorv32_pcpi_mul` -core that implements the `MUL[H[SU|U]]` instructions. The external CPCI +core that implements the `MUL[H[SU|U]]` instructions. The external PCPI interface only becomes functional when ENABLE_PCPI is set as well. #### ENABLE_IRQ (default = 0) @@ -218,7 +218,7 @@ Cycles per Instruction Performance *A short reminder: This core is optimized for size, not performance.* Unless stated otherwise, the following numbers apply to a PicoRV32 with -ENABLE_REGS_DUALPORT active and connected to a memory that can accomodate +ENABLE_REGS_DUALPORT active and connected to a memory that can accommodate requests within one clock cycle. The average Cycles per Instruction (CPI) is 4 to 5, depending on the mix of @@ -303,7 +303,7 @@ pulse on `mem_la_read` or `mem_la_write` to indicate the start of a read or write transaction in the next clock cycles. *Note: The signals `mem_la_read`, `mem_la_write`, and `mem_la_addr` are driven -by combinatorical circuits within the PicoRV32 core. It might be harder to +by combinatorial circuits within the PicoRV32 core. It might be harder to achieve timing closure with the look-ahead interface than with the normal memory interface described above.* @@ -389,8 +389,8 @@ and rs2 fields are ignored in all this instructions. See [firmware/custom_ops.S](firmware/custom_ops.S) for GNU assembler macros that implement mnemonics for this instructions. -See [firmware/start.S](firmware/start.S) for an example implementaion of an -interrupt handler assember wrapper, and [firmware/irq.c](firmware/irq.c) for +See [firmware/start.S](firmware/start.S) for an example implementation of an +interrupt handler assembler wrapper, and [firmware/irq.c](firmware/irq.c) for the actual interrupt handler. #### getq rd, qs