Lab_NHMFL
/
upsilon
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

manual

This commit is contained in:
Peter McGoron 2023-04-20 15:20:28 -04:00
parent bb359d36a1
commit 51d31b9129
1 changed files with 5 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
doc/programmers_manual.md
View File

@ -25,6 +25,9 @@ made up of Yosys (synthesis) and nextpnr (place and route).
## Required Knowledge
This document is written under the assumption that you are using Linux.
You can make this work on other platforms but I don't know how to.
Verilog is critical for writing hardware. You should hopefully not have
to write much of it.
@ -193,7 +196,7 @@ TFTP FOR THE AMOUNT OF TIME REQUIRED TO BOOT THE CONTROL SOFTWARE.**
You can read about how to setup a TFTP server on the [OpenWRT wiki][owrt_wiki].
On Linux, run
dnsmasq --port=0 --enable-tftp --tftp-root=/path/to/firmware/directory --user=root --group=root --interface=$INTERFACE
dnsmasq -d --port=0 --enable-tftp --tftp-root=/path/to/firmware/directory --user=root --group=root --interface=$INTERFACE
Do not use `--tftp-no-blocksize`. The controller will only read the first
512 bytes of the kernel.
@ -552,7 +555,7 @@ static ip.
1. Remove your computer from the DHCP list that the router has.
2. Run `ip link set eth-interface up`.
3. Then run `ip addr` and run `ip addr remove del [ip] dev eth-interface` on
3. Then run `ip addr` and run `ip addr del [ip] dev eth-interface` on
each ip on the ethernet interface that is connected to the controller.
3. Run `ip addr add 192.168.1.100/24 dev eth-interface` (or whatever ip + subnet
mask you need)