# Copyright 2023 (C) Peter McGoron
# 
# This file is a part of Upsilon, a free and open source software project.
# For license terms, refer to the files in `doc/copying` in the Upsilon 
# source distribution.

.PHONY: images f4pga buildroot litex clone help attach hardware-image \
	install-software openFPGALoader pytftp \
	buildroot-image upsilon-hardware.tar.gz upsilon-opensbi.tar.gz upsilon-buildroot.tar.gz

###### Images

images: hardware-image buildroot-image opensbi-image


###### Install Software

install-software: openFPGALoader

openFPGALoader:
	git clone https://github.com/trabucayre/openFPGALoader
	mkdir openFPGALoader/build
	cd openFPGALoader/build && cmake ..
	cd openFPGALoader/build && cmake --build .

#### Local pip

venv-create:
	python3 -m venv venv
	. venv/bin/activate && pip install mpy-cross

###### Containers

### Hardware container

hardware-image:
	docker build -f Dockerfile.hardware -t "upsilon-hardware-env" .
hardware-container:
	docker run -d --name upsilon-hardware upsilon-hardware-env /bin/sh -c 'while true; do sleep 2; done'
hardware-copy: upsilon-hardware.tar.gz
	# XXX: this always fails if there are very high UIDs, but the
	# file is copied successfully.
	-docker cp upsilon-hardware.tar.gz upsilon-hardware:/home/user/upsilon-hardware.tar.gz
	docker exec -ti upsilon-hardware tar -xvf upsilon-hardware.tar.gz
hardware-execute:
	docker exec -ti upsilon-hardware /bin/bash -lc ' \
		cd upsilon/gateware && \
		source ~/conda/xc7/conda/etc/profile.d/conda.sh && \
		conda activate xc7 && \
		make clean && make'
hardware-shell:
	docker exec -ti upsilon-hardware /bin/bash -l
hardware-get:
	docker cp upsilon-hardware:/home/user/upsilon/gateware/build/digilent_arty/gateware/digilent_arty.v ../boot/
	docker cp upsilon-hardware:/home/user/upsilon/gateware/build/digilent_arty/gateware/digilent_arty.bit ../boot/
	docker cp upsilon-hardware:/home/user/upsilon/gateware/arty.dtb ../boot/
	docker cp upsilon-hardware:/home/user/upsilon/gateware/csr.json ../boot/
	docker cp upsilon-hardware:/home/user/upsilon/gateware/soc_subregions.json ../boot/
	docker cp upsilon-hardware:/home/user/upsilon/gateware/pico0.json ../boot/
	docker cp upsilon-hardware:/home/user/upsilon/gateware/mmio.py ../linux/
	docker cp upsilon-hardware:/home/user/upsilon/gateware/pico0_mmio.h ../swic/
hardware-clean:
	-docker container stop upsilon-hardware
	-docker container rm upsilon-hardware

### OpenSBI Container

opensbi-image: opensbi.tar.gz
	docker build -f Dockerfile.opensbi -t "upsilon-opensbi-env" .
opensbi-container:
	docker run -d --name upsilon-opensbi upsilon-opensbi-env /bin/sh -c 'while true; do sleep 2; done'
opensbi-copy: upsilon-opensbi.tar.gz
	-docker cp upsilon-opensbi.tar.gz upsilon-opensbi:/home/user/upsilon-opensbi.tar.gz
opensbi-get:
	docker cp upsilon-opensbi:/home/user/opensbi/build/platform/litex/vexriscv/firmware/fw_jump.bin ../boot/
opensbi-shell:
	docker exec -ti upsilon-opensbi /bin/bash -l
opensbi-execute:
	docker exec -ti upsilon-opensbi /bin/bash -c ' \
		tar -xvf upsilon-opensbi.tar.gz && \
		cd opensbi && \
		make clean && \
		make CROSS_COMPILE=riscv64-linux-gnu- PLATFORM=litex/vexriscv \
		'
opensbi-clean:
	-docker container stop upsilon-opensbi
	-docker container rm upsilon-opensbi

### Verilator Container

verilator-image:
	docker build -f Dockerfile.verilator -t "upsilon-verilator-env" .
verilator-container:
	docker run -d --name upsilon-verilator upsilon-verilator-env /bin/sh -c 'while true; do sleep 2; done'
verilator-copy: upsilon-hardware.tar.gz
	-docker cp upsilon-hardware.tar.gz upsilon-verilator:/home/user/upsilon-hardware.tar.gz
verilator-shell:
	docker exec -ti upsilon-verilator /bin/bash -l
verilator-execute:
	docker exec -ti upsilon-verilator /bin/bash -c ' \
		tar -xvf upsilon-hardware.tar.gz && \
		cd upsilon/gateware && \
		make clean && \
		make test \
		'
verilator-get:
	docker cp upsilon-verilator:/home/user/upsilon/gateware/rtl/waveform/waveform.fst ./
verilator-clean:
	-docker container stop upsilon-verilator
	-docker container rm upsilon-verilator

### Buildroot Container

buildroot-image: buildroot.tar.gz
	docker build -f Dockerfile.buildroot -t "upsilon-buildroot-env" .
buildroot-container:
	docker run -d --name upsilon-buildroot upsilon-buildroot-env /bin/sh -c 'while true; do sleep 2; done'
buildroot-copy: upsilon-buildroot.tar.gz
	-docker cp upsilon-buildroot.tar.gz upsilon-buildroot:/home/user/upsilon-buildroot.tar.gz
buildroot-shell:
	docker exec -ti upsilon-buildroot /bin/bash -l
buildroot-get:
	docker cp upsilon-buildroot:/home/user/buildroot/output/images/Image ../boot/
	docker cp upsilon-buildroot:/home/user/buildroot/output/images/rootfs.cpio ../boot/
buildroot-execute:
	docker exec -ti upsilon-buildroot /bin/bash -c ' \
		tar -xvf upsilon-buildroot.tar.gz && \
		cd buildroot && \
		make clean && \
		make BR2_EXTERNAL=../upsilon/buildroot litex_vexriscv_defconfig && \
		make '
buildroot-clean:
	-docker container stop upsilon-buildroot
	-docker container rm upsilon-buildroot

###### Execute

flash:
	if [ -d 'openFPGALoader' ]; then \
		OPENFPGALOADER=./openFPGALoader/build/openFPGALoader; \
	else \
		OPENFPGALOADER=openFPGALoader; \
	fi; \
	$$OPENFPGALOADER -c digilent ../boot/digilent_arty.bit

tftp:
	cd ../boot && py3tftp --host 192.168.2.100 -p 6969 -v

copy:
	scp -O ../boot/mmio.py ../linux/comm.py upsilon:~/

###### External projects

clone: f4pga buildroot litex opensbi

f4pga:
	if [ ! -d 'f4pga' ]; then \
		git clone https://github.com/chipsalliance/f4pga; \
	fi
	cd f4pga && git checkout main && git pull && \
		git checkout -B upsilon_stable 835a40534f9efd70770d74f56f25fef6cfc6ebc6
	tar -czvf f4pga.tar.gz f4pga

buildroot:
	if [ ! -d 'buildroot' ]; then \
		git clone https://git.buildroot.org/buildroot; \
	fi
	cd buildroot && git checkout master && git pull && \
		git checkout -B upsilon_stable 2023.02.1
	tar -czvf buildroot.tar.gz buildroot/

litex:
	if [ ! -d 'litex' ]; then \
		git clone https://github.com/enjoy-digital/litex; \
	fi
	cd litex && git checkout master && git pull && \
		git checkout -B upsilon_stable c6ccb626e88168045edacced3743f6bd98746742

# This archiving commands rename the directory which only works with GNU tar

upsilon-hardware.tar.gz:
	tar -czvf upsilon-hardware.tar.gz ../gateware/ --transform 's|gateware|upsilon/gateware|'

upsilon-buildroot.tar.gz:
	tar -czvf upsilon-buildroot.tar.gz ../buildroot/ --transform 's|buildroot|upsilon/buildroot|'

upsilon-opensbi.tar.gz:
	tar -czvf upsilon-opensbi.tar.gz ../opensbi/ --transform 's|opensbi|opensbi/platform|'

opensbi:
	if [ ! -d 'opensbi' ]; then \
		git clone https://github.com/riscv-software-src/opensbi; \
	fi
	cd opensbi && git checkout master && git pull && \
		git checkout -B upsilon_stable v1.2

opensbi.tar.gz:
	tar -czvf opensbi.tar.gz opensbi/