From e8e99d1b9fc62ca71585cdcda97dcaf407f0017f Mon Sep 17 00:00:00 2001
From: aeb <aeb@53a565d1-3bb7-0310-b661-cf11e63c67ab>
Date: Fri, 8 Jun 2001 18:25:31 +0000
Subject: [PATCH] Forgot to add dumpiso and sendiso man pages to repository,
 fixed.

git-svn-id: svn://svn.linux1394.org/libraw1394/trunk@67 53a565d1-3bb7-0310-b661-cf11e63c67ab
---
 doc/dumpiso.1.in | 36 ++++++++++++++++++++++++++++++++++++
 doc/sendiso.1.in | 41 +++++++++++++++++++++++++++++++++++++++++
 2 files changed, 77 insertions(+)
 create mode 100644 doc/dumpiso.1.in
 create mode 100644 doc/sendiso.1.in

diff --git a/doc/dumpiso.1.in b/doc/dumpiso.1.in
new file mode 100644
index 0000000..b2ced09
--- /dev/null
+++ b/doc/dumpiso.1.in
@@ -0,0 +1,36 @@
+.TH dumpiso 1 "libraw1394 @VERSION@" "" "Linux IEEE 1394"
+.SH NAME
+dumpiso \- dump IEEE 1394 isochronous channel packets
+.SH SYNOPSIS
+.B dumpiso
+[ \fIoptions\fR ] [ \fIFILE\fR ]
+.SH DESCRIPTION
+dumpiso listens on a selected range of channels and dumps all received packets
+into the file \fIFILE\fR or, if not given, to standard output.  While dumping,
+the current number of received packets is written to standard error and updated
+with every packet.
+.PP
+It uses a simple file format for the dumps, described in another man page yet to
+be written.  The dumped packets can be sent out again with \fBsendiso\fR(1).
+.SH OPTIONS
+.TP
+.B -c\fR,\fB --channels=\fICHANNELS
+Sets the channels to listen on.  \fICHANNELS\fR can be either a single number,
+in which case this is the only channel to listen on, or a range of channels in
+the form X-Y.  Channel numbers can range from 0 to 63.  You can give this option
+multiple times, new channels are added to the list of already set channels.
+Defaults to all channels.
+.TP
+.B -p\fR,\fB --port=\fIPORT
+Choose port \fIPORT\fR for receiving.  A port is a 1394 card or chip and
+represents one connected bus, therefore this is only relevant when you have
+multiple of these.  Defaults to 0.
+.TP
+.B -h\fR,\fB --help
+Show help text and exit.
+.SH BUGS
+None known.
+.SH SEE ALSO
+.B sendiso\fR(1)
+.SH AUTHOR
+Andreas Bombe <aeb@debian.org>
diff --git a/doc/sendiso.1.in b/doc/sendiso.1.in
new file mode 100644
index 0000000..8f316ca
--- /dev/null
+++ b/doc/sendiso.1.in
@@ -0,0 +1,41 @@
+.TH sendiso 1 "libraw1394 @VERSION@" "" "Linux IEEE 1394"
+.SH NAME
+sendiso \- send IEEE 1394 isochronous packets from dump file
+.SH SYNOPSIS
+.B sendiso
+[ \fIoptions\fR ] \fIFILE\fR
+.SH DESCRIPTION
+sendiso takes the dump file \fIFILE\fR as generated by \fBdumpiso\fR(1),
+extracts the packets and sends them as they were received (in the same order,
+with the same channel numbers) as fast as possible - timing of the original dump
+is not preserved.
+.PP
+This program does not allocate any isochronous resources but just starts
+sending.  It should not be used in live environments where it might interfere
+with properly set up isochronous transmissions, it is a debug and performance
+benchmarking tool.
+.SH OPTIONS
+.TP
+.B -l\fR,\fB --loop=\fICOUNT
+Send dump file \fICOUNT\fR times.  Defaults to 1.
+.TP
+.B -i\fR,\fB --infinite
+Send dump file in an endless loop.
+.TP
+.B -s\fR,\fB --speed=\fISPEED
+Send packets at speed \fISPEED\fR, which can be given as 100, 200 and 400 (in
+Mbit/s) or abbreviated as 1, 2 and 4.  Defaults to 100.
+.TP
+.B -p\fR,\fB --port=\fIPORT
+Choose port \fIPORT\fR for sending.  A port is a 1394 card or chip and
+represents one connected bus, therefore this is only relevant when you have
+multiple of these.  Defaults to 0.
+.TP
+.B -h\fR,\fB --help
+Show help text and exit.
+.SH BUGS
+None known.
+.SH SEE ALSO
+.B dumpiso\fR(1)
+.SH AUTHOR
+Andreas Bombe <aeb@debian.org>