.TH sendiso 1 "libraw1394 @VERSION@" "" "Linux IEEE 1394" .SH NAME sendiso \- send IEEE 1394 isochronous packets from dump file .SH SYNOPSIS .B sendiso [ \fIoptions\fR ] \fIFILE\fR .SH DESCRIPTION sendiso takes the dump file \fIFILE\fR as generated by \fBdumpiso\fR(1), extracts the packets and sends them as they were received (in the same order, with the same channel numbers) as fast as possible - timing of the original dump is not preserved. .PP This program does not allocate any isochronous resources but just starts sending. It should not be used in live environments where it might interfere with properly set up isochronous transmissions, it is a debug and performance benchmarking tool. .SH OPTIONS .TP .B -l\fR,\fB --loop=\fICOUNT Send dump file \fICOUNT\fR times. Defaults to 1. .TP .B -i\fR,\fB --infinite Send dump file in an endless loop. .TP .B -s\fR,\fB --speed=\fISPEED Send packets at speed \fISPEED\fR, which can be given as 100, 200 and 400 (in Mbit/s) or abbreviated as 1, 2 and 4. Defaults to 100. .TP .B -p\fR,\fB --port=\fIPORT Choose port \fIPORT\fR for sending. A port is a 1394 card or chip and represents one connected bus, therefore this is only relevant when you have multiple of these. Defaults to 0. .TP .B -h\fR,\fB --help Show help text and exit. .SH BUGS None known. .SH SEE ALSO .B dumpiso\fR(1) .SH AUTHOR Andreas Bombe