f4pga-examples/README.md

88 lines
4.1 KiB
Markdown
Raw Normal View History

# SymbiFlow examples
This repository provides example FPGA designs that can be built using SymbiFlow open source toolchain.
The examples target the Artix-7 devices.
The repository includes:
* Travis CI configuration file
* Build scripts to generate the environment:
* Conda configurations
* Python requirements
* Environment setup
* Example FPGA designs including:
* Verilog code
* Pin constraints files
* Timing constraints files
* Makefiles for running the SymbiFlow toolchain
## Description
Travis-based CI in this repository runs all the steps required to build the example designs and generate bitstreams for programming the FPGA devices.
The CI performs the following steps:
* [Miniconda](https://docs.conda.io/en/latest/miniconda.html) installation and configuration
* Installation of the required conda packages (toolchains and Python modules). Note that Python packages can be installed using any Python package manager:
* [VTR](https://anaconda.org/symbiflow/vtr)
* [Yosys](https://anaconda.org/symbiflow/yosys)
* [Yosys-plugins](https://anaconda.org/symbiflow/yosys-plugins)
* [lxml](https://anaconda.org/conda-forge/lxml), [simplejson](https://anaconda.org/conda-forge/simplejson), [intervaltree](https://anaconda.org/conda-forge/intervaltree), [python-constraint](https://anaconda.org/conda-forge/python-constraint), [git](https://anaconda.org/conda-forge/git), [pip](https://anaconda.org/conda-forge/pip) and [fasm](https://github.com/SymbiFlow/fasm)
## Toolchain installation
This block of code regards the toolchain installation. It is divided in three main steps:
- Conda setup
- Conda packages installation
- Architecture definitions installation
```bash
INSTALL_DIR=/opt/symbiflow
wget https://repo.continuum.io/miniconda/Miniconda3-latest-Linux-x86_64.sh
bash Miniconda3-latest-Linux-x86_64.sh -b -p $INSTALL_DIR/conda && rm Miniconda3-latest-Linux-x86_64.sh
source $INSTALL_DIR/conda/etc/profile.d/conda.sh
conda config --set always_yes yes --set changeps1 no
conda config --add channels conda-forge
conda config --add channels symbiflow
conda update -q conda
conda activate
conda install -c symbiflow yosys
conda install -c symbiflow yosys-plugins
conda install -c symbiflow vtr=8.0.0.rc2_3575_g253f75b6d
conda install lxml simplejson intervaltree python-constraint git pip
pip install git+https://github.com/symbiflow/fasm
wget -qO- https://storage.googleapis.com/symbiflow-arch-defs/artifacts/prod/foss-fpga-tools/symbiflow-arch-defs/continuous/install/4/20200416-002215/symbiflow-arch-defs-install-a321d9d9.tar.xz | tar -xJ -C $INSTALL_DIR
conda deactivate
```
## Build Example Designs
With the toolchain installed, you can build the example designs.
The example designs are provided in separate directories:
1. `counter` - simple 4-bit counter driving LEDs. The design targets the [Basys3 board](https://store.digilentinc.com/basys-3-artix-7-fpga-trainer-board-recommended-for-introductory-users/) .
1. `picosoc` - [picorv32](https://github.com/cliffordwolf/picorv32) based SoC. The design targets the [Basys3 board](https://store.digilentinc.com/basys-3-artix-7-fpga-trainer-board-recommended-for-introductory-users/).
1. `linux_litex` - [LiteX](https://github.com/enjoy-digital/litex) based system with Linux capable [VexRiscv core](https://github.com/SpinalHDL/VexRiscv). The design includes [DDR](https://github.com/enjoy-digital/litedram) and [Ethernet](https://github.com/enjoy-digital/liteeth) controllers. The design targets the [Arty board](https://store.digilentinc.com/arty-a7-artix-7-fpga-development-board-for-makers-and-hobbyists/).
The Linux images for the `linux_litex` example can be build following the [linux on litex vexriscv](https://github.com/litex-hub/linux-on-litex-vexriscv) instructions.
The `linux_litex` example is already provided with working Linux images.
To build the examples, run following commands from the project root directory:
```bash
conda activate
# adding symbiflow toolchain binaries to PATH
export PATH=$INSTALL_DIR/install/bin:$PATH
# counter example
pushd counter_test && make && popd
# picosoc example
pushd picosoc_demo && make && popd
# litex example
pushd linux_litex_demo && make && popd
```