Florent Kermarrec
|
37fb44f33e
|
add bench directory with a first bench on arty board.
The aim is to create an automated hardware bench, control is done over Etherbone
(but could also be done over UARTBone, PCIe, USB, etc...) and various frequencies
are tested and BIOS logged.
It would also be useful to be able to recompile/reload BIOS in this bench to easily
test software changes and verify it works with various frequencies.
Can be tested with:
./arty.py --build --load
lxserver --udp
./arty.py --test
Dump Main PLL...
ClkReg1:
low_time: 8
high_time: 8
reserved: 1
phase_mux: 0
Reconfig Main PLL to 133.33333333333331MHz...
Measuring sys_clk...
sys_clk: 133.72MHz
Reset SoC and get BIOS log...
__
__ _ __ _ __
/ / (_) /____ | |/_/
/ /__/ / __/ -_)> <
/____/_/\__/\__/_/|_|
Build your hardware, easily!
(c) Copyright 2012-2020 Enjoy-Digital
(c) Copyright 2007-2015 M-Labs
BIOS built on Aug 6 2020 18:49:15
BIOS CRC passed (44c8f057)
Migen git sha1: 7bc4eb1
LiteX git sha1: 188e6f57
--=============== SoC ==================--
CPU: VexRiscv @ 100MHz
BUS: WISHBONE 32-bit @ 4GiB
CSR: 32-bit data
ROM: 32KiB
SRAM: 8KiB
L2: 8KiB
MAIN-RAM: 262144KiB
--========== Initialization ============--
Initializing DRAM @0x40000000...
SDRAM now under software control
SDRAM now under software control
Read leveling:
m0, b00: |00000000000000000000000000000000| delays: -
m0, b01: |00000000000000000000000000000000| delays: -
m0, b02: |00000000000000000000000000000000| delays: -
m0, b03: |00000000000000000000000000000000| delays: -
m0, b04: |00000000000000000000000000000000| delays: -
m0, b05: |00000000000000000000000000000000| delays: -
m0, b06: |00000000000000000000000000000000| delays: -
m0, b07: |00000000000000000000000000000000| delays: -
m0, b08: |00000000000000000000000000000000| delays: -
m0, b09: |11111111111000000000000000000000| delays: 05+-05
m0, b10: |00000000000111111111110000000000| delays: 16+-05
m0, b11: |00000000000000000000000111111111| delays: 27+-04
m0, b12: |00000000000000000000000000000000| delays: -
m0, b13: |00000000000000000000000000000000| delays: -
m0, b14: |00000000000000000000000000000000| delays: -
m0, b15: |00000000000000000000000000000000| delays: -
best: m0, b09 delays: 05+-05
m1, b00: |00000000000000000000000000000000| delays: -
m1, b01: |00000000000000000000000000000000| delays: -
m1, b02: |00000000000000000000000000000000| delays: -
m1, b03: |00000000000000000000000000000000| delays: -
m1, b04: |00000000000000000000000000000000| delays: -
m1, b05: |00000000000000000000000000000000| delays: -
m1, b06: |00000000000000000000000000000000| delays: -
m1, b07: |00000000000000000000000000000000| delays: -
m1, b08: |00000000000000000000000000000000| delays: -
m1, b09: |11111111111000000000000000000000| delays: 05+-05
m1, b10: |00000000000011111111111000000000| delays: 17+-05
m1, b11: |00000000000000000000000011111111| delays: 28+-04
m1, b12: |00000000000000000000000000000000| delays: -
m1, b13: |00000000000000000000000000000000| delays: -
m1, b14: |00000000000000000000000000000000| delays: -
m1, b15: |00000000000000000000000000000000| delays: -
best: m1, b09 delays: 05+-05
SDRAM now under hardware control
Memtest at 0x40000000...
[########################################]
[########################################]
Memtest OK
Memspeed at 0x40000000...
Writes: 212 Mbps
Reads: 188 Mbps
--============== Boot ==================--
Booting from serial...
Press Q or ESC to abort boot completely.
sL5DdSMmkekro
Timeout
No boot medium found
--============= Console ================--
litex> Reconfig Main PLL to 114.28571428571428MHz...
|
2020-08-06 19:05:20 +02:00 |