239 lines
7.7 KiB
Python
239 lines
7.7 KiB
Python
#
|
|
# This file is part of LiteDRAM.
|
|
#
|
|
# Copyright (c) 2020 Florent Kermarrec <florent@enjoy-digital.fr>
|
|
# SPDX-License-Identifier: BSD-2-Clause
|
|
|
|
import time
|
|
|
|
# PLL Helpers --------------------------------------------------------------------------------------
|
|
|
|
class ClkReg1:
|
|
def __init__(self, value=0):
|
|
self.unpack(value)
|
|
|
|
def unpack(self, value):
|
|
self.low_time = (value >> 0) & (2**6 - 1)
|
|
self.high_time = (value >> 6) & (2**6 - 1)
|
|
self.reserved = (value >> 12) & (2**1 - 1)
|
|
self.phase_mux = (value >> 13) & (2**3 - 1)
|
|
|
|
def pack(self):
|
|
value = (self.low_time << 0)
|
|
value |= (self.high_time << 6)
|
|
value |= (self.reserved << 12)
|
|
value |= (self.phase_mux << 13)
|
|
return value
|
|
|
|
def __repr__(self):
|
|
s = "ClkReg1:\n"
|
|
s += " low_time: {:d}\n".format(self.low_time)
|
|
s += " high_time: {:d}\n".format(self.high_time)
|
|
s += " reserved: {:d}\n".format(self.reserved)
|
|
s += " phase_mux: {:d}".format(self.phase_mux)
|
|
return s
|
|
|
|
class ClkReg2:
|
|
def __init__(self, value=0):
|
|
self.unpack(value)
|
|
|
|
def unpack(self, value):
|
|
self.delay_time = (value >> 0) & (2**6 - 1)
|
|
self.no_count = (value >> 6) & (2**1 - 1)
|
|
self.edge = (value >> 7) & (2**1 - 1)
|
|
self.mx = (value >> 8) & (2**2 - 1)
|
|
self.frac_wf_r = (value >> 10) & (2**1 - 1)
|
|
self.frac_en = (value >> 11) & (2**1 - 1)
|
|
self.frac = (value >> 12) & (2**3 - 1)
|
|
self.reserved = (value >> 15) & (2**1 - 1)
|
|
|
|
def pack(self):
|
|
value = (self.delay_time << 0)
|
|
value |= (self.no_count << 6)
|
|
value |= (self.edge << 7)
|
|
value |= (self.mx << 8)
|
|
value |= (self.frac_wf_r << 10)
|
|
value |= (self.frac_en << 11)
|
|
value |= (self.frac << 12)
|
|
value |= (self.reserved << 15)
|
|
return value
|
|
|
|
def __repr__(self):
|
|
s = "ClkReg2:\n"
|
|
s += " delay_time: {:d}\n".format(self.delay_time)
|
|
s += " no_count: {:d}\n".format(self.no_count)
|
|
s += " edge: {:d}\n".format(self.edge)
|
|
s += " mx: {:d}\n".format(self.mx)
|
|
s += " frac_wf_r: {:d}\n".format(self.frac_wf_r)
|
|
s += " frac_en: {:d}\n".format(self.frac_en)
|
|
s += " frac: {:d}\n".format(self.frac)
|
|
s += " reserved: {:d}".format(self.reserved)
|
|
return s
|
|
|
|
class S7PLL:
|
|
def __init__(self, bus):
|
|
self.bus = bus
|
|
|
|
def reset(self):
|
|
self.bus.regs.crg_main_pll_drp_reset.write(1)
|
|
|
|
def read(self, adr):
|
|
self.bus.regs.crg_main_pll_drp_adr.write(adr)
|
|
self.bus.regs.crg_main_pll_drp_read.write(1)
|
|
return self.bus.regs.crg_main_pll_drp_dat_r.read()
|
|
|
|
def write(self, adr, value):
|
|
self.bus.regs.crg_main_pll_drp_adr.write(adr)
|
|
self.bus.regs.crg_main_pll_drp_dat_w.write(value)
|
|
self.bus.regs.crg_main_pll_drp_write.write(1)
|
|
|
|
|
|
class USPLL(S7PLL): pass
|
|
|
|
# Bench Controller ---------------------------------------------------------------------------------
|
|
|
|
class BenchController:
|
|
def __init__(self, bus):
|
|
self.bus = bus
|
|
|
|
def reboot(self):
|
|
self.bus.regs.ctrl_reset.write(1)
|
|
|
|
def load_rom(self, filename, delay=0):
|
|
from litex.soc.integration.common import get_mem_data
|
|
rom_data = get_mem_data(filename, "little")
|
|
for i, data in enumerate(rom_data):
|
|
self.bus.write(self.bus.mems.rom.base + 4*i, data)
|
|
time.sleep(delay)
|
|
|
|
# Bench Test ---------------------------------------------------------------------------------------
|
|
|
|
def s7_bench_test(freq_min, freq_max, freq_step, vco_freq, bios_filename, bios_timeout=10):
|
|
import time
|
|
from litex import RemoteClient
|
|
|
|
bus = RemoteClient()
|
|
bus.open()
|
|
|
|
# # #
|
|
|
|
# Load BIOS and reboot SoC
|
|
ctrl = BenchController(bus)
|
|
ctrl.load_rom(bios_filename)
|
|
ctrl.reboot()
|
|
|
|
# PLL/ClkReg
|
|
s7pll = S7PLL(bus)
|
|
clkout0_clkreg1 = ClkReg1(s7pll.read(0x8))
|
|
|
|
# Run calibration from freq_min to freq_max and log BIOS output.
|
|
print("-"*80)
|
|
print("Running calibration; sys_clk from {:3.3f}MHz to {:3.2f}MHz (step: {:3.2f}MHz)".format(
|
|
freq_min/1e6, freq_max/1e6, freq_step/1e6))
|
|
print("-"*80)
|
|
print("")
|
|
tested_vco_divs = []
|
|
for clk_freq in range(int(freq_min), int(freq_max), int(freq_step)):
|
|
# Compute VCO divider, skip if already tested.
|
|
vco_div = int(vco_freq/clk_freq)
|
|
if vco_div in tested_vco_divs:
|
|
continue
|
|
tested_vco_divs.append(vco_div)
|
|
|
|
print("-"*40)
|
|
print("sys_clk = {}MHz...".format(vco_freq/vco_div/1e6))
|
|
print("-"*40)
|
|
|
|
# Reconfigure PLL to change sys_clk
|
|
clkout0_clkreg1.high_time = vco_div//2 + vco_div%2
|
|
clkout0_clkreg1.low_time = vco_div//2
|
|
s7pll.write(0x08, clkout0_clkreg1.pack())
|
|
|
|
# Measure/verify sys_clk
|
|
duration = 5e-1
|
|
start = bus.regs.crg_sys_clk_counter.read()
|
|
time.sleep(duration)
|
|
end = bus.regs.crg_sys_clk_counter.read()
|
|
print("Measured sys_clk: {:3.2f}MHz.".format((end-start)/(1e6*duration)))
|
|
|
|
# Reboot SoC and log BIOS output
|
|
print("-"*40)
|
|
print("Reboot SoC and get BIOS log...")
|
|
print("-"*40)
|
|
ctrl.reboot()
|
|
start = time.time()
|
|
while (time.time() - start) < bios_timeout:
|
|
if bus.regs.uart_xover_rxfull.read():
|
|
for c in bus.read(bus.regs.uart_xover_rxtx.addr, 16, burst="fixed"):
|
|
print("{:c}".format(c), end="")
|
|
print("")
|
|
|
|
# # #
|
|
|
|
bus.close()
|
|
|
|
# Bench Test ---------------------------------------------------------------------------------------
|
|
|
|
def us_bench_test(freq_min, freq_max, freq_step, vco_freq, bios_filename, bios_timeout=40):
|
|
import time
|
|
from litex import RemoteClient
|
|
|
|
bus = RemoteClient()
|
|
bus.open()
|
|
|
|
# # #
|
|
|
|
# Load BIOS and reboot SoC
|
|
ctrl = BenchController(bus)
|
|
ctrl.load_rom(bios_filename, delay=1e-4) # FIXME: delay needed on KCU105 @ 11200bauds.
|
|
ctrl.reboot()
|
|
|
|
# PLL/ClkReg
|
|
uspll = USPLL(bus)
|
|
clkout0_clkreg1 = ClkReg1(uspll.read(0x8))
|
|
|
|
# Run calibration from freq_min to freq_max and log BIOS output.
|
|
print("-"*80)
|
|
print("Running calibration; sys_clk from {:3.3f}MHz to {:3.2f}MHz (step: {:3.2f}MHz)".format(
|
|
freq_min/1e6, freq_max/1e6, freq_step/1e6))
|
|
print("-"*80)
|
|
print("")
|
|
tested_vco_divs = []
|
|
for clk_freq in range(int(freq_min), int(freq_max), int(freq_step)):
|
|
# Compute VCO divider, skip if already tested.
|
|
vco_div = int(vco_freq/clk_freq)
|
|
if vco_div in tested_vco_divs:
|
|
continue
|
|
tested_vco_divs.append(vco_div)
|
|
|
|
print("-"*40)
|
|
print("sys_clk = {}MHz...".format(vco_freq/vco_div/1e6))
|
|
print("-"*40)
|
|
|
|
# Reconfigure PLL to change sys_clk
|
|
clkout0_clkreg1.high_time = vco_div//2 + vco_div%2
|
|
clkout0_clkreg1.low_time = vco_div//2
|
|
uspll.write(0x08, clkout0_clkreg1.pack())
|
|
|
|
# Measure/verify sys_clk
|
|
duration = 5e-1
|
|
start = bus.regs.crg_sys_clk_counter.read()
|
|
time.sleep(duration)
|
|
end = bus.regs.crg_sys_clk_counter.read()
|
|
print("Measured sys_clk: {:3.2f}MHz.".format((end-start)/(1e6*duration)))
|
|
|
|
# Reboot SoC and log BIOS output
|
|
print("-"*40)
|
|
print("Reboot SoC and get BIOS log...")
|
|
print("-"*40)
|
|
ctrl.reboot()
|
|
start = time.time()
|
|
while (time.time() - start) < bios_timeout:
|
|
if bus.regs.uart_xover_rxempty.read() == 0:
|
|
for c in bus.read(bus.regs.uart_xover_rxtx.addr, 1, burst="fixed"):
|
|
print("{:c}".format(c), end="")
|
|
print("")
|
|
# # #
|
|
|
|
bus.close()
|