litex-boards/litex_boards/platforms/lattice_crosslink_nx_evn.py

435 lines
14 KiB
Python
Raw Normal View History

2020-08-24 10:44:14 -04:00
#
# This file is part of LiteX-Boards.
#
2020-08-24 16:33:58 -04:00
# Copyright (c) 2020 David Corrigan <davidcorrigan714@gmail.com>
2020-08-24 10:44:14 -04:00
# Copyright (c) 2020 Alan Green <avg@google.com>
# SPDX-License-Identifier: BSD-2-Clause
from litex.build.generic_platform import *
from litex.build.lattice import LatticeNexusPlatform
2020-08-24 10:44:14 -04:00
from litex.build.lattice.programmer import LatticeProgrammer
from litex.build.lattice.programmer import EcpprogProgrammer
2020-08-24 10:44:14 -04:00
# IOs ----------------------------------------------------------------------------------------------
_io = [
# Section 5.1 Clock sources
("clk12", 0, Pins("L13"), IOStandard("LVCMOS33")), # Ensure JP2 is installed
# Clock signal is differential, but we only name the "p" side.
("clk125", 0, Pins("C12"), IOStandard("LVDS")),
# 7.2. General Purpose Push Buttons - all logic zero when pressed
("gsrn", 0, Pins("G19"), IOStandard("LVCMOS33")), # SW4
("programn", 0, Pins("E11"), IOStandard("LVCMOS33")), # SW5
("user_btn", 0, Pins("G14"), IOStandard("LVCMOS33")), # SW2
("user_btn", 1, Pins("G15"), IOStandard("LVCMOS33")), # SW3
# Section 6.2 UART Topology
# Requires installation of 0-ohm jumpers R15 and R17 to properly route signals
# Note that it is R15 and R17, not R16 and R17 as stated in the user guide
2020-08-24 10:44:14 -04:00
("serial", 0,
Subsignal("rx", Pins("F16"), IOStandard("LVCMOS33")),
Subsignal("tx", Pins("F18"), IOStandard("LVCMOS33")),
),
# Section 7.3 General Purpose LEDs
("user_led", 0, Pins("E17"), IOStandard("LVCMOS33")), # Bank 1 Green
("user_led", 1, Pins("F13"), IOStandard("LVCMOS33")), # Bank 1 Green
("user_led", 2, Pins("G13"), IOStandard("LVCMOS33")), # Bank 1 Green
("user_led", 3, Pins("F14"), IOStandard("LVCMOS33")), # Bank 1 Green
("user_led", 4, Pins("L16"), IOStandard("LVCMOS33")), # Bank 1 Green
("user_led", 5, Pins("L15"), IOStandard("LVCMOS33")), # Bank 1 Green
("user_led", 6, Pins("L20"), IOStandard("LVCMOS33")), # Bank 1 Green
("user_led", 7, Pins("L19"), IOStandard("LVCMOS33")), # Bank 1 Green
("user_led", 8, Pins("R17"), IOStandard("LVCMOS33")), # Bank 2 Green
("user_led", 9, Pins("R18"), IOStandard("LVCMOS33")), # Bank 2 Green
("user_led", 10, Pins("U20"), IOStandard("LVCMOS33")), # Bank 2 Green
("user_led", 11, Pins("T20"), IOStandard("LVCMOS33")), # Bank 2 Green
("user_led", 12, Pins("W20"), IOStandard("LVCMOS33")), # Bank 2 Yellow
("user_led", 13, Pins("V20"), IOStandard("LVCMOS33")), # Bank 2 Yellow
# Section 7.1 DIP Switch
("user_dip_btn", 0, Pins("N14"), IOStandard("LVCMOS33")),
("user_dip_btn", 1, Pins("M14"), IOStandard("LVCMOS33")),
("user_dip_btn", 2, Pins("M16"), IOStandard("LVCMOS33")),
("user_dip_btn", 3, Pins("M15"), IOStandard("LVCMOS33")),
("user_dip_btn", 4, Pins("N15"), IOStandard("LVCMOS33")),
("user_dip_btn", 5, Pins("N16"), IOStandard("LVCMOS33")),
("user_dip_btn", 6, Pins("M17"), IOStandard("LVCMOS33")),
("user_dip_btn", 7, Pins("M18"), IOStandard("LVCMOS33")),
# Section 6.3.1. SPI Configuration
("spiflash", 0,
Subsignal("cs_n", Pins("E13")),
Subsignal("clk", Pins("E12")),
Subsignal("mosi", Pins("D13")),
Subsignal("miso", Pins("D15")),
Subsignal("wp", Pins("D14")),
Subsignal("hold", Pins("D16")),
IOStandard("LVCMOS33")
),
("spiflash4x", 0,
Subsignal("cs_n", Pins("E13")),
Subsignal("clk", Pins("E12")),
Subsignal("dq", Pins("D13 D15 D14 D16")),
IOStandard("LVCMOS33")
),
# Section 8.2 Parallel FMC Configuration Connector
("fmc_config", 0,
Subsignal("fmc_tck", Pins("P19")), # 3
Subsignal("ps_por_b", Pins("N19")), # 4
Subsignal("fmc_tdi", Pins("P20")), # 7
Subsignal("fmc_prsnt", Pins("N20")), # 8
Subsignal("fmc_tdo", Pins("P17")), # 9
Subsignal("fmc_scl", Pins("M20")), # 10
Subsignal("fmc_tms", Pins("P18")), # 13
Subsignal("fmc_sda", Pins("M19")), # 14
IOStandard("LVCMOS33")
),
]
# Connectors ---------------------------------------------------------------------------------------
_connectors = [
#TODO ADC
#TODO D-PHY
# Section 8.1 FMC LPC Connector
("FMC", {
"LA06_P" : "W9", # C10
"LA06_N" : "Y9", # C11
"LA10_P" : "W10", # C14
"LA10_N" : "Y10", # C15
"LA14_P" : "W11", # C18
"LA14_N" : "Y11", # C19
"LA18_CC_P" : "R8", # C22
"LA18_CC_N" : "T8", # C23
"LA27_P" : "Y13", # C26
"LA27_N" : "Y14", # C27
"LA01_CC_P" : "W13", # D08
"LA01_CC_N" : "V12", # D09
"LA05_P" : "R5", # D11
"LA05_N" : "R6", # D12
"LA09_P" : "V6", # D14
"LA09_N" : "U7", # D15
"LA13_P" : "R9", # D17
"LA13_N" : "P9", # D18
"LA17_P" : "U10", # D20
"LA17_N" : "V10", # D21
"LA23_P" : "P11", # D23
"LA23_N" : "R11", # D24
"LA26_P" : "T13", # D26
"LA26_N" : "T14", # D27
"CLK1_P" : "R7", # G02
"CLK1_N" : "T7", # G03
"LA00_CC_P" : "V11", # G06
"LA00_CC_N" : "U11", # G07
"LA03_P" : "W6", # G09
"LA03_N" : "Y6", # G10
"LA08_P" : "Y7", # G12
"LA08_N" : "Y8", # G13
"LA12_P" : "U1", # G15
"LA12_N" : "T1", # G16
"LA16_P" : "P7", # G18
"LA16_N" : "P8", # G19
"LA20_P" : "T10", # G21
"LA20_N" : "T11", # G22
"LA22_P" : "V14", # G24
"LA22_N" : "U14", # G25
"LA25_P" : "R12", # G27
"LA25_N" : "P12", # G28
"LA29_P" : "Y15", # G30
"LA29_N" : "Y16", # G31
"LA31_P" : "Y17", # G33
"LA31_N" : "U16", # G34
"VREF" : "T6", # H01
"VREFa" : "Y18", # H01
"CLK0_P" : "Y12", # H04
"CLK0_N" : "W12", # H05
"LA02_P" : "Y2", # H07
"LA02_N" : "Y3", # H08
"LA04_P" : "V1", # H10
"LA04_N" : "W1", # H11
"LA07_P" : "W7", # H13
"LA07_N" : "V7", # H14
"LA11_P" : "P10", # H16
"LA11_N" : "R10", # H17
"LA15_P" : "W8", # H19
"LA15_N" : "V9", # H20
"LA19_P" : "U12", # H22
"LA19_N" : "T12", # H23
"LA21_P" : "P13", # H25
"LA21_N" : "R13", # H26
"LA24_P" : "W14", # H28
"LA24_N" : "W15", # H29
"LA28_P" : "U15", # H31
"LA28_N" : "U16", # H32
"LA30_P" : "V17", # H34
"LA30_N" : "U16", # H35
}),
# Section 8.3 Raspberry Pi Board GPIO Header
("RASP",
"None", # (no pin 0)
"None", # 1 3.3V
"None", # 2 5V
"L6", # 3 RASP_IO02
"None", # 4 5V
"L5", # 5 RASP_IO03
"None", # 6 GND
"M3", # 7 RASP_IO04
"M2", # 8 RASP_IO14
"None", # 9 GND
"L1", # 10 RASP_IO15
"L2", # 11 RASP_IO17
"R2", # 12 RASP_IO18
"R1", # 13 RASP_IO27
"None", # 14 GND
"P2", # 15 RASP_IO22
"P1", # 16 RASP_IO23
"None", # 17 3.3V
"K7", # 18 RASP_IO24
"N4", # 19 RASP_IO10
"None", # 20 GND
"K6", # 21 RASP_IO09
"K5", # 22 RASP_IO25
"N7", # 23 RASP_IO11
"P6", # 24 RASP_IO08
"None", # 25 GND
"N5", # 26 RASP_IO07
"M7", # 27 RASP_ID_SD
"M4", # 28 RASP_ID_SC
"K8", # 29 RASP_IO05
"None", # 30 GND
"L7", # 31 RASP_IO06
"L8", # 32 RASP_IO12
"M5", # 33 RASP_IO13
"None", # 34 GND
"M6", # 35 RASP_IO19
"N6", # 36 RASP_IO16
"P5", # 37 RASP_IO26
"R3", # 38 RASP_IO20
"None", # 39 GND
"R4", # 40 RASP_IO21
),
# Section 8.6 PMOD Header
# PMOD signal number:
# 1 2 3 4 7 8 9 10
("PMOD0", "D10 D9 D7 D8 D6 D5 D4 D3"),
("PMOD1", "E10 E9 E7 E8 E4 E3 E2 F1"),
("PMOD2", "J2 J1 K2 K1 K3 K4 D17 E18"),
]
# Test and Demo ------------------------------------------------------------------------------------
serial_pmods = [
("serial_pmod0", 0,
Subsignal("rx", Pins("PMOD0:0"), IOStandard("LVCMOS33")),
Subsignal("tx", Pins("PMOD0:1"), IOStandard("LVCMOS33")),
),
("serial_pmod1", 0,
Subsignal("rx", Pins("PMOD1:0"), IOStandard("LVCMOS33")),
Subsignal("tx", Pins("PMOD1:1"), IOStandard("LVCMOS33")),
),
("serial_pmod2", 0,
Subsignal("rx", Pins("PMOD2:0"), IOStandard("LVCMOS33")),
Subsignal("tx", Pins("PMOD2:1"), IOStandard("LVCMOS33")),
),
]
# Platform -----------------------------------------------------------------------------------------
class Platform(LatticeNexusPlatform):
default_clk_name = "clk12"
default_clk_period = 1e9/12e6
def __init__(self, device="LIFCL-40-9BG400C", toolchain="radiant", **kwargs):
# Accept "LIFCL" for backwards compatibility.
# LIFCL just means Crosslink-NX so we can expect every
# Crosslink-NX Evaluation Board to have a LIFCL part.
if device == "LIFCL":
device == "LIFCL-40-9BG400C"
assert device in ["LIFCL-40-9BG400C", "LIFCL-40-8BG400CES"]
LatticeNexusPlatform.__init__(self, device, _io, _connectors, toolchain=toolchain, **kwargs)
2020-08-24 10:44:14 -04:00
def create_programmer(self, mode = "direct", prog="radiant"):
2020-08-24 10:44:14 -04:00
assert mode in ["direct","flash"]
assert prog in ["radiant","ecpprog"]
if prog == "ecpprog":
return EcpprogProgrammer()
2020-08-24 10:44:14 -04:00
xcf_template_direct = """<?xml version='1.0' encoding='utf-8' ?>
<!DOCTYPE ispXCF SYSTEM "IspXCF.dtd" >
<ispXCF version="R1.2.0">
<Comment></Comment>
<Chain>
<Comm>JTAG</Comm>
<Device>
<SelectedProg value="TRUE"/>
<Pos>1</Pos>
<Vendor>Lattice</Vendor>
<Family>LIFCL</Family>
<Name>LIFCL-40</Name>
<IDCode>0x010f1043</IDCode>
<Package>All</Package>
<PON>LIFCL-40</PON>
<Bypass>
<InstrLen>8</InstrLen>
<InstrVal>11111111</InstrVal>
<BScanLen>1</BScanLen>
<BScanVal>0</BScanVal>
</Bypass>
<File>{bitstream_file}</File>
<JedecChecksum>N/A</JedecChecksum>
<MemoryType>Static Random Access Memory (SRAM)</MemoryType>
<Operation>Fast Configuration</Operation>
<Option>
<SVFVendor>JTAG STANDARD</SVFVendor>
<IOState>HighZ</IOState>
<PreloadLength>362</PreloadLength>
<IOVectorData>0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF</IOVectorData>
<Usercode>0x00000000</Usercode>
<AccessMode>Direct Programming</AccessMode>
</Option>
</Device>
</Chain>
<ProjectOptions>
<Program>SEQUENTIAL</Program>
<Process>ENTIRED CHAIN</Process>
<OperationOverride>No Override</OperationOverride>
<StartTAP>TLR</StartTAP>
<EndTAP>TLR</EndTAP>
<VerifyUsercode value="FALSE"/>
<TCKDelay>3</TCKDelay>
</ProjectOptions>
<CableOptions>
<CableName>USB2</CableName>
<PortAdd>FTUSB-0</PortAdd>
</CableOptions>
</ispXCF>
"""
xcf_template_flash = """<?xml version='1.0' encoding='utf-8' ?>
<!DOCTYPE ispXCF SYSTEM "IspXCF.dtd" >
<ispXCF version="R1.2.0">
<Comment></Comment>
<Chain>
<Comm>JTAG2SPI</Comm>
<Device>
<SelectedProg value="TRUE"/>
<Pos>1</Pos>
<Vendor>Lattice</Vendor>
<Family>LIFCL</Family>
<Name>LIFCL-40</Name>
<Package>All</Package>
<Bypass>
<InstrLen>8</InstrLen>
<InstrVal>11111111</InstrVal>
<BScanLen>1</BScanLen>
<BScanVal>0</BScanVal>
</Bypass>
<File>{bitstream_file}</File>
<MemoryType>External SPI Flash Memory (SPI FLASH)</MemoryType>
<Operation>Erase,Program,Verify</Operation>
<Option>
<SVFVendor>JTAG STANDARD</SVFVendor>
<Usercode>0x00000000</Usercode>
<AccessMode>Direct Programming</AccessMode>
</Option>
<FPGALoader>
<CPLDDevice>
<Device>
<Pos>1</Pos>
<Vendor>Lattice</Vendor>
<Family>LIFCL</Family>
<Name>LIFCL-40</Name>
<IDCode>0x010f1043</IDCode>
<Package>All</Package>
<PON>LIFCL-40</PON>
<Bypass>
<InstrLen>8</InstrLen>
<InstrVal>11111111</InstrVal>
<BScanLen>1</BScanLen>
<BScanVal>0</BScanVal>
</Bypass>
<MemoryType>Static Random Access Memory (SRAM)</MemoryType>
<Operation>Refresh Verify ID</Operation>
<Option>
<SVFVendor>JTAG STANDARD</SVFVendor>
<IOState>HighZ</IOState>
<PreloadLength>362</PreloadLength>
<IOVectorData>0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF</IOVectorData>
<AccessMode>Direct Programming</AccessMode>
</Option>
</Device>
</CPLDDevice>
<FlashDevice>
<Device>
<Pos>1</Pos>
<Vendor>Macronix</Vendor>
<Family>SPI Serial Flash</Family>
<Name>MX25L12833F</Name>
<IDCode>0x18</IDCode>
<Package>8-pin SOP</Package>
<Operation>Erase,Program,Verify</Operation>
<File>{bitstream_file}</File>
<AddressBase>0x00000000</AddressBase>
<EndAddress>0x000F0000</EndAddress>
<DeviceSize>128</DeviceSize>
<DataSize>1016029</DataSize>
<NumberOfDevices>1</NumberOfDevices>
<ReInitialize value="FALSE"/>
</Device>
</FlashDevice>
<FPGADevice>
<Device>
<Pos>1</Pos>
<Name></Name>
<File>{bitstream_file}</File>
<LocalChainList>
<LocalDevice index="-99"
name="Unknown"
file="{bitstream_file}"/>
</LocalChainList>
<Option>
<SVFVendor>JTAG STANDARD</SVFVendor>
</Option>
</Device>
</FPGADevice>
</FPGALoader>
</Device>
</Chain>
<ProjectOptions>
<Program>SEQUENTIAL</Program>
<Process>ENTIRED CHAIN</Process>
<OperationOverride>No Override</OperationOverride>
<StartTAP>TLR</StartTAP>
<EndTAP>TLR</EndTAP>
<DisableCheckBoard value="TRUE"/>
<VerifyUsercode value="FALSE"/>
<TCKDelay>3</TCKDelay>
</ProjectOptions>
<CableOptions>
<CableName>USB2</CableName>
<PortAdd>FTUSB-0</PortAdd>
<USBID>Lattice CrossLink-NX Eval Board A Location 0000 Serial FT4J4IK9A</USBID>
</CableOptions>
</ispXCF>
"""
if mode == "direct":
xcf_template = xcf_template_direct
if mode == "flash":
xcf_template = xcf_template_flash
return LatticeProgrammer(xcf_template)