litex-boards/litex_boards/platforms/alinx_axu2cga.py

178 lines
6.3 KiB
Python
Raw Normal View History

#
# This file is part of LiteX-Boards.
#
# Copyright (c) 2022 Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
# SPDX-License-Identifier: BSD-2-Clause
from litex.build.generic_platform import *
from litex.build.xilinx import XilinxUSPPlatform
from litex.build.openfpgaloader import OpenFPGALoader
# IOs ----------------------------------------------------------------------------------------------
_io = [
# Clk / Rst
("clk25", 0, Pins("AB11"), IOStandard("LVCMOS33")),
# Leds
("user_led", 0, Pins("W13"), IOStandard("LVCMOS33")),
("user_led", 1, Pins("Y12"), IOStandard("LVCMOS33")),
("user_led", 2, Pins("AA12"), IOStandard("LVCMOS33")),
("user_led", 3, Pins("AB13"), IOStandard("LVCMOS33")),
# Buttons
("user_btn", 0, Pins("AA13"), IOStandard("LVCMOS33")),
("user_btn", 1, Pins("AE14"), IOStandard("LVCMOS33")),
("user_btn", 2, Pins("AE15"), IOStandard("LVCMOS33")),
("user_btn", 3, Pins("AG14"), IOStandard("LVCMOS33")),
# Serial (no UART by default -> use J15 3 & 5)
("serial", 0,
Subsignal("tx", Pins("A11")),
Subsignal("rx", Pins("A13")),
IOStandard("LVCMOS33")
),
# MIPI 0
("camera", 0,
Subsignal("mclk", Pins("AG13"),IOStandard("LVCMOS33")),
Subsignal("clkp", Pins("AC9")),
Subsignal("clkn", Pins("AD9")),
Subsignal("dp", Pins("AE9 AB8")),
Subsignal("dn", Pins("AE8 AC8")),
IOStandard("MIPI_DPHY")
),
("mipi_gpio", 0,
Subsignal("gpio", Pins("AH14")),
IOStandard("LVCMOS33")
),
("mipi_i2c", 0,
Subsignal("scl", Pins("AH13")),
Subsignal("sda", Pins("AE13")),
IOStandard("LVCMOS33")
),
# MIPI 1
("camera", 1,
Subsignal("mclk", Pins("AC14"), IOStandard("LVCMOS33")),
Subsignal("clkp", Pins("U9")),
Subsignal("clkn", Pins("V9")),
Subsignal("dp", Pins("U8 W8")),
Subsignal("dn", Pins("V8 Y8")),
IOStandard("MIPI_DPHY")
),
("mipi_gpio", 1,
Subsignal("gpio", Pins("AD15")),
IOStandard("LVCMOS33")
),
("mipi_i2c", 1,
Subsignal("scl", Pins("AD14")),
Subsignal("sda", Pins("AC13")),
IOStandard("LVCMOS33")
)
]
# Connectors ---------------------------------------------------------------------------------------
_connectors = [
("J12", {
3: "F7", 4: "G8",
5: "F6", 6: "G6",
7: "D9", 8: "E9",
9: "F5", 10: "G5",
11: "E8", 12: "F8",
13: "D5", 14: "E5",
15: "C4", 16: "D4",
17: "E3", 18: "E4",
19: "F1", 20: "G1",
21: "E2", 22: "F2",
23: "D6", 24: "D7",
25: "B9", 26: "C9",
27: "A4", 28: "B4",
29: "B6", 30: "C6",
31: "A6", 32: "A7",
33: "B8", 34: "C8",
35: "A8", 36: "A9",
}),
("j15", {
3: "A11", 4: "A12",
5: "A13", 6: "B13",
7: "A14", 8: "B14",
9: "E13", 10: "E14",
11: "A15", 12: "B15",
13: "C13", 14: "C14",
15: "B10", 16: "C11",
17: "D14", 18: "D15",
19: "F11", 20: "F12",
21: "H13", 22: "H14",
23: "G14", 24: "G15",
25: "F10", 26: "G11",
27: "H12", 28: "J12",
29: "J14", 30: "K14",
31: "K12", 32: "K13",
33: "L13", 34: "L14",
35: "G10", 36: "H11",
})
]
# PSU config ---------------------------------------------------------------------------------------
psu_config = {
"PSU__DPAUX__PERIPHERAL__IO": "MIO 27 .. 30",
"PSU__ENET3__PERIPHERAL__ENABLE": "1",
"PSU__ENET3__GRP_MDIO__ENABLE": "1",
"PSU__I2C1__PERIPHERAL__ENABLE": "1",
"PSU__I2C1__PERIPHERAL__IO": "MIO 32 .. 33",
"PSU__PCIE__PERIPHERAL__ENABLE": "1",
"PSU__PCIE__PERIPHERAL__ROOTPORT_IO": "MIO 37",
"PSU__USB0__REF_CLK_SEL": "Ref Clk1",
"PSU__PCIE__DEVICE_PORT_TYPE": "Root Port",
"PSU__PCIE__CLASS_CODE_SUB": "0x04",
"SUBPRESET1": "DDR4_MICRON_MT40A256M16GE_083E",
"PSU__QSPI__PERIPHERAL__ENABLE": "1",
"PSU__QSPI__PERIPHERAL__DATA_MODE": "x4",
"PSU__QSPI__GRP_FBCLK__ENABLE": "1",
"PSU__SD1__PERIPHERAL__ENABLE": "1",
"PSU__SD1__PERIPHERAL__IO": "MIO 46 .. 51",
"PSU__SD1__GRP_CD__ENABLE": "1",
"PSU__SD1__SLOT_TYPE": "SD 2.0",
"PSU__TTC0__PERIPHERAL__ENABLE": "1",
"PSU__TTC1__PERIPHERAL__ENABLE": "1",
"PSU__TTC2__PERIPHERAL__ENABLE": "1",
"PSU__TTC3__PERIPHERAL__ENABLE": "1",
"PSU__DDRC__BUS_WIDTH": "32 Bit",
"PSU__UART1__PERIPHERAL__ENABLE": "1",
"PSU__UART1__PERIPHERAL__IO": "MIO 24 .. 25",
"PSU__USB0__PERIPHERAL__ENABLE": "1",
"PSU__USB0__RESET__ENABLE": "1",
"PSU__USB0__RESET__IO": "MIO 44",
"PSU__USB__RESET__MODE": "Shared MIO Pin",
"PSU__USB3_0__PERIPHERAL__ENABLE": "1",
"PSU__USB3_0__PERIPHERAL__IO": "GT Lane1",
"PSU_BANK_0_IO_STANDARD": "LVCMOS18",
"PSU_BANK_1_IO_STANDARD": "LVCMOS18",
"PSU_BANK_2_IO_STANDARD": "LVCMOS18",
"PSU__DISPLAYPORT__PERIPHERAL__ENABLE": "1",
"PSU__CRF_APB__DP_VIDEO_REF_CTRL__SRCSEL": "VPLL",
"PSU__CRF_APB__DP_AUDIO_REF_CTRL__SRCSEL": "RPLL",
"PSU__CRF_APB__DP_STC_REF_CTRL__SRCSEL": "RPLL",
"PSU__CRF_APB__TOPSW_MAIN_CTRL__SRCSEL": "APLL",
}
# Platform -----------------------------------------------------------------------------------------
class Platform(XilinxUSPPlatform):
default_clk_name = "clk25"
default_clk_period = 1e9/25e6
def __init__(self, toolchain="vivado"):
XilinxUSPPlatform.__init__(self, "xczu2cg-sfvc784-1-e", _io, _connectors, toolchain=toolchain)
self.psu_config = psu_config
def create_programmer(self, cable):
return OpenFPGALoader("axu2cga", cable)
def do_finalize(self, fragment):
XilinxUSPPlatform.do_finalize(self, fragment)
self.add_period_constraint(self.lookup_request("clk25", loose=True), 1e9/25e6)