Merge pull request #526 from Chandler-Kluser/master
Added QMTECH RP2040 Daughterboard
This commit is contained in:
enjoy-digital
GitHub
commit
41351a845a
|
|
@ -141,7 +141,7 @@ class Platform(Xilinx7SeriesPlatform):
|
|||
default_clk_period = 1e9/50e6
|
||||
kgates = None
|
||||
|
||||
def __init__(self, kgates=100, toolchain="vivado", with_daughterboard=False):
|
||||
def __init__(self, kgates=100, toolchain="vivado", with_daughterboard=False, with_rp2040_daughterboard=False):
|
||||
assert(kgates in [75, 100], "kgates can only be 75 or 100 representing a XC7A75T, XC7TA100T")
|
||||
self.kgates = kgates
|
||||
device = f"xc7a{kgates}tfgg676-1"
|
||||
|
|
@ -160,6 +160,12 @@ class Platform(Xilinx7SeriesPlatform):
|
|||
io += daughterboard.io
|
||||
connectors += daughterboard.connectors
|
||||
|
||||
if with_rp2040_daughterboard:
|
||||
from litex_boards.platforms.qmtech_rp2040_daughterboard import QMTechDaughterboard
|
||||
daughterboard = QMTechDaughterboard(IOStandard("LVCMOS33"))
|
||||
io += daughterboard.io
|
||||
connectors += daughterboard.connectors
|
||||
|
||||
Xilinx7SeriesPlatform.__init__(self, device, io, connectors, toolchain=toolchain)
|
||||
self.toolchain.bitstream_commands = \
|
||||
["set_property BITSTREAM.CONFIG.SPI_BUSWIDTH 4 [current_design]",
|
||||
|
|
|
|||
|
|
@ -0,0 +1,136 @@
|
|||
#
|
||||
# This file is part of LiteX-Boards.
|
||||
#
|
||||
# Copyright (c) 2023 Kazumoto Kojima
|
||||
# Copyright (c) 2023 Hans Baier <hansfbaier@gmail.com>
|
||||
# Copyright (c) 2023 Chandler Klüser <chandler.kluser@gmail.com>
|
||||
#
|
||||
# SPDX-License-Identifier: BSD-2-Clause
|
||||
|
||||
from litex.build.generic_platform import Subsignal, Pins, IOStandard, Misc
|
||||
|
||||
class QMTechDaughterboard:
|
||||
"""
|
||||
the QMTech daughterboard contains standard peripherals
|
||||
and can be used with a number of different FPGA core boards
|
||||
source: https://www.aliexpress.com/item/1005005094654777.html
|
||||
"""
|
||||
|
||||
def __init__(self, io_standard) -> None:
|
||||
"""
|
||||
because the board can be used with FPGAs core boards from
|
||||
different vendors, the constructor needs the vendor specific IOStandard
|
||||
"""
|
||||
self.io = [
|
||||
|
||||
# GMII Ethernet
|
||||
("eth_clocks", 0,
|
||||
Subsignal("tx", Pins("J3:22")),
|
||||
Subsignal("gtx", Pins("J3:29")),
|
||||
Subsignal("rx", Pins("J3:37")),
|
||||
io_standard
|
||||
),
|
||||
("eth", 0,
|
||||
# rst is hardwired on the board
|
||||
#Subsignal("rst_n", Pins("-")),
|
||||
Subsignal("int_n", Pins("J3:26")),
|
||||
Subsignal("mdio", Pins("J3:15")),
|
||||
Subsignal("mdc", Pins("J3:16")),
|
||||
Subsignal("rx_dv", Pins("J3:42")),
|
||||
Subsignal("rx_er", Pins("J3:32")),
|
||||
Subsignal("rx_data", Pins("J3:41 J3:40 J3:39 J3:38 J3:36 J3:35 J3:34 J3:33")),
|
||||
Subsignal("tx_en", Pins("J3:28")),
|
||||
Subsignal("tx_er", Pins("J3:17")),
|
||||
Subsignal("tx_data", Pins("J3:27 J3:25 J3:24 J3:23 J3:21 J3:20 J3:19 J3:18")),
|
||||
Subsignal("col", Pins("J3:31")),
|
||||
Subsignal("crs", Pins("J3:30")),
|
||||
io_standard
|
||||
),
|
||||
|
||||
# VGA
|
||||
("vga", 0,
|
||||
Subsignal("hsync_n", Pins("J3:44")),
|
||||
Subsignal("vsync_n", Pins("J3:43")),
|
||||
Subsignal("r", Pins("J3:57 J3:56 J3:59 J3:58 J3:60")),
|
||||
Subsignal("g", Pins("J3:51 J3:50 J3:53 J3:52 J3:54 J3:55")),
|
||||
Subsignal("b", Pins("J3:46 J3:45 J3:48 J3:47 J3:49")),
|
||||
io_standard
|
||||
),
|
||||
|
||||
# PullUp resistors are on the board, so we don't need them in the FPGA
|
||||
("sdcard", 0,
|
||||
Subsignal("data", Pins("J3:10 J3:9 J3:14 J3:13")),
|
||||
Subsignal("cmd", Pins("J3:12")),
|
||||
Subsignal("clk", Pins("J3:11")),
|
||||
# RP2040 Daughterboard have CD pin pulled up
|
||||
# Subsignal("cd", Pins("Jx:x")),
|
||||
io_standard,
|
||||
),
|
||||
# RP2040 pins
|
||||
# Native RP2040 Firmware comes with a single 9600-8-N-1 USB to UART converter
|
||||
# GPIO28 is used as UART0 TX. GPIO29 is used as UART0 RX
|
||||
# Firmware and Source Code available at: https://github.com/ChinaQMTECH/DB_FPGA_with_RP2040
|
||||
("rp2040", 0,
|
||||
Subsignal( "gpio0", Pins("J3:7")),
|
||||
Subsignal( "gpio1", Pins("J3:8")),
|
||||
Subsignal( "gpio2", Pins("J2:44")),
|
||||
Subsignal( "gpio3", Pins("J2:43")),
|
||||
Subsignal( "gpio4", Pins("J2:42")),
|
||||
Subsignal( "gpio5", Pins("J2:41")),
|
||||
Subsignal( "gpio6", Pins("J2:40")),
|
||||
Subsignal( "gpio7", Pins("J2:39")),
|
||||
Subsignal( "gpio8", Pins("J2:38")),
|
||||
Subsignal( "gpio9", Pins("J2:37")),
|
||||
Subsignal( "gpio10", Pins("J2:36")),
|
||||
Subsignal( "gpio11", Pins("J2:35")),
|
||||
Subsignal( "gpio12", Pins("J2:34")),
|
||||
Subsignal( "gpio13", Pins("J2:33")),
|
||||
Subsignal( "gpio14", Pins("J2:32")),
|
||||
Subsignal( "gpio15", Pins("J2:31")),
|
||||
# RP2040 GPIOs 16 to 19 are external headers
|
||||
# They can be used to drive JTAG interface using Dirty Jtag (for RP2040)
|
||||
# More information at: https://github.com/phdussud/pico-dirtyJtag
|
||||
# A second option is to use the same pins to drive a
|
||||
# Xilinx Virtual Cable (XVC) client for JTAG Programming in Xilinx FPGAs Core Boards
|
||||
# More information at: https://github.com/kholia/xvc-pico
|
||||
# Subsignal( "gpio16", Pins("Jx:x")),
|
||||
# Subsignal( "gpio17", Pins("Jx:x")),
|
||||
# Subsignal( "gpio18", Pins("Jx:x")),
|
||||
# Subsignal( "gpio19", Pins("Jx:x")),
|
||||
Subsignal( "gpio20", Pins("J2:30")),
|
||||
Subsignal( "gpio21", Pins("J2:29")),
|
||||
Subsignal( "gpio22", Pins("J2:28")),
|
||||
Subsignal( "gpio23", Pins("J2:27")),
|
||||
# RP2040 GPIOs 24 and 25 are connected to User Push Button and User LED
|
||||
# Subsignal( "gpio24", Pins("Jx:x")),
|
||||
# Subsignal( "gpio25", Pins("Jx:x")),
|
||||
Subsignal("gpio26_adc0", Pins("J2:26")),
|
||||
Subsignal("gpio27_adc1", Pins("J2:25")),
|
||||
Subsignal("gpio28_adc2", Pins("J2:16")),
|
||||
Subsignal("gpio29_adc3", Pins("J2:15")),
|
||||
io_standard,
|
||||
),
|
||||
]
|
||||
|
||||
connectors = [
|
||||
("pmoda", "J2:17 J2:19 J2:21 J2:23 J2:18 J2:20 J2:22 J2:24"), #J10
|
||||
("pmodb", "J2:7 J2:9 J2:11 J2:13 J2:8 J2:10 J2:12 J2:14"), #J11
|
||||
("J1", {
|
||||
3: "J2:60",
|
||||
4: "J2:59",
|
||||
5: "J2:58",
|
||||
6: "J2:57",
|
||||
7: "J2:56",
|
||||
8: "J2:55",
|
||||
9: "J2:54",
|
||||
10: "J2:53",
|
||||
11: "J2:52",
|
||||
12: "J2:51",
|
||||
13: "J2:50",
|
||||
14: "J2:49",
|
||||
15: "J2:48",
|
||||
16: "J2:47",
|
||||
17: "J2:46",
|
||||
18: "J2:45"
|
||||
}),
|
||||
]
|
||||
Loading…
Reference in New Issue