__   _ __      _  __    ___                   __
                             / /  (_) /____ | |/_/___/ _ )___  ___ ________/ /__
                            / /__/ / __/ -_)>  </___/ _  / _ \/ _ `/ __/ _  (_-<
                           /____/_/\__/\__/_/|_|   /____/\___/\_,_/_/  \_,_/___/

                                          LiteX boards files

                                 Copyright 2012-2022 / LiteX-Hub community

[> Intro

From the very tiny Fomu to large PCIe accelerator boards....

This repository contains the platforms/targets currently supported by LiteX:

• The platform provides the definition of the board: IOs, constraints, clocks, components + methods to load and flash the bitstream to it.
• The target provides a LiteX base design for the board that allows you to create a SoC (with or without a CPU) and integrate easily all the base components of your board: Ethernet, DRAM, PCIe, SPIFlash, SDCard, Leds, GPIOs, etc...

The targets can be used as a base to build more complex or custom SoCs. They are are for example directly reused by the Linux-on-LiteX-VexRiscv project that is just using a specific configuration (Linux-capable CPU, additional peripherals). Basing your design on provided targets allows to to reduce code duplication between very various projects.

First make sure to install LiteX correctly by following the installation guide and have a look at the LiteX's wiki for tutorials, examples of projects and more information to use/build FPGA designs with it.

Each target provides a default configuration with a CPU, ROM, SRAM, UART, DRAM (if available), Ethernet (if available), etc... that can be simply built and loaded to the FPGA with:

$ ./target.py --build --load

You can then open a terminal on the main UART of the board and interact with the LiteX BIOS:

But this is just the starting point to create your own hardware! You can then:

• Change the CPU: add --cpu-type=lm32, microwatt, serv, rocket, etc...
• Change the Bus standard: add --bus-standard=wishbone, axi-lite
• Enable components: add --with-ethernet --with-etherbone --with-sdcard etc...
• Load application code to the CPU over UART/Ethernet/SDCard, etc...
• Create a bridge with your computer to easily access the main bus of your SoC.
• Add a Logic Analyzer to your SoC to easily observe/debug your design.
• Simulate your SoC and interact with it at decent speed with LiteX Sim/Verilator.
• Integrate external cores/CPU to create your own design.
• etc...

Please use ./target.py --help to see the pre-built various possibilities.

Hoping you will find this useful and enjoy it, please contribute back if you make improvements that could be useful to others or find issues!

A question or want to get in touch? Our IRC channel is #litex at irc.libera.chat

Note: All boards with >= 32MB of memory and enough logic can be considered as Linux Capable.

[> Open-hardware boards

Fully open-hardware boards, the ECP5 and iCE40 ones are even usable with the open-source FPGA toolchains!

Name	FPGA Family	FPGA device	Sys-Clk	TTY	RAM	PCIe	Ethernet	Flash	SDCard
ECPIX-5	Lattice ECP5	LFE5UM5G-85F	75MHz	FTDI	16-bit 512MB DDR3	No	1Gbps RGMII	16MB QSPI	Yes
Fomu	Lattice iCE40	iCE40-UP5K	12MHz	USB	128KB SPRAM	No	No	16MB QSPI	No
HADBadge	Lattice ECP5	LFE5U-45F	48MHz	IOs	8-bit 32MB SDR	No	No	16MB QSPI	No
iCEBreaker	Lattice iCE40	iCE40-UP5K	24MHz	FTDI	128KB SPRAM	No	No	16MB QSPI	No
iCESugar	Lattice iCE40	iCE40-UP5K	24MHz	STM32	128KB SPRAM	No	No	8MB QSPI	No
LogicBone	Lattice ECP5	LFE5U-45F	75MHz	FTDI	16-bit 1GB DDR3	No	1Gbps RGMII	16MB QSPI	Yes
MarbleMini	Xilinx Artix7	XC7A100T	100MHz	FTDI	16-bit 1GB DDR3	No	1Gbps RGMII	16MB QSPI	No
MiniSpartan6	Xilinx Spartan6	XC6SLX25	80MHz	FTDI	16-bit 32MB SDR	No	No	8MB QSPI	Yes
NeTV2	Xilinx Artix7	XC7A35T	100MHz	IOs	32-bit 512MB DDR3	Gen2 X4	100Mbps RMII	16MB QSPI	Yes
OrangeCrab	Lattice ECP5	LFE5U-25F	48MHz	USB	16-bit 128MB SDR	No	No	4MB QSPI	Yes
Pipistrello	Xilinx Spartan6	XC6SLX45	83MHz	FTDI	16-bit 64MB LPDDR	No	No	16MB QSPI	Yes*
ULX3S	Lattice ECP5	LFE5U-45F	50MHz	FTDI	16-bit 32MB SDR	No	No	4MB QSPI	Yes
TrellisBoard	Lattice ECP5	LFE5UM5G-85F	75MHz	FTDI	32-bit 1GB DDR3	Gen2 X1*	1Gbps RGMII	16MB QSPI	Yes
TinyFPGA	Lattice iCE40	iCE40-LP8K	16MHz	IOs	No	No	No	16MB QSPI	No

* Present on the board but not yet supported or validated with LiteX.

[> Accelerator boards

PCIe accelerators boards that you could use to accelerate your applications, LiteX provides you the essential cores for it: LitePCIe and LiteDRAM along with the LiteX infrastructure to create a design and easily control it/debug it.

Name	FPGA Family	FPGA device	Sys-Clk	TTY	DRAM	PCIe	Flash
AcornCLE215+	Xilinx Artix7	XC7A200T	125MHz	PCIe	16-bit 1GB DDR3	Gen2 X4	16MB QSPI
ForestKitten33	Xilinx Ultrascale+	XCVU33P	125MHz	PCIe	2 x 1024-bit 4GB HBM2*	Gen3 X16	?
BCU1525	Xilinx Ultrascale+	XCVU9P	125MHz	PCIe	4 x 64-bit DDR4 DIMM	Gen3 X16	?
AlveoU250	Xilinx Ultrascale+	XCU250	125MHz	PCIe	4 x 64-bit DDR4 DIMM	Gen2 X16	?
AlveoU280	Xilinx Ultrascale+	XCU280-ES1	150MHz	PCIe*	2 x 64-bit DDR4 DIMM 2 x 1024-bit 4GB HBM2*	Gen2 X16	?

* Present on the board but not yet supported or validated with LiteX.

[> Repurposed hardware

Repurposed FPGA hardware that has been "documented" by enthusiasts :), allows you to discover FPGAs for very cheap (starting at 15$)!

Name	FPGA Family	FPGA device	Sys-Clk	TTY	DRAM	Ethernet	Flash
SDS1104X-E	Xilinx Zynq	XC7Z020	100MHz	Eth	32-bit 256MB DDR3	100Mbps MII	?
Colorlight5A	Lattice ECP5	LFE5U-25F	60MHz	IOs	32-bit 8MB SDR	2x 1Gbps RGMII	4MB QSPI
Linsn RV901	Xilinx Spartan6	XC6SLX16	75MHz	IOs	32-bit 8MB SDR	2x 1Gbps RGMII	4MB QSPI
PanoLogic G2	Xilinx Spartan6	XC6SLX100-150	50MHz	IOs	32-bit 128MB DDR2	1Gbps GMII	16MB QSPI
Camlink-4K	Lattice ECP5	LFE5U-25F	81MHz	IOs	16-bit 128MB DDR3	No	?MB QSPI
EBAZ4205	Xilinx Zynq	XC7Z010 (28k)	33.333MHz	IOs	256MB DDR3	100Mbps RMII	128MB NAND

The Colorlight5A is a very nice board to start with, cheap, powerful, easy to use with the open-source toolchain, you can find a specific LiteX project here

* Present on the board but not yet supported or validated with LiteX.

[> Development boards

Name	FPGA Family	FPGA device	Sys-Clk	TTY	RAM	PCIe	Ethernet	Flash	SDCard
AC701	Xilinx Artix7	XC7A200T	100MHz	FTDI	64-bit ?MB DDR3	Gen2 X4	1Gbps RGMII	16MB QSPI	Yes*
Aller	Xilinx Artix7	XC7A200T	100MHz	PCIe	16-bit 256MB DDR3	Gen2 X4	No	128MB QSPI	No
Arty(A7)	Xilinx Artix7	XC7A35T	100MHz	FTDI	16-bit 256MB DDR3	No	100Mbps MII	16MB QSPI	No
ArtyS7	Xilinx Spartan7	XC7S50	100MHz	FTDI	16-bit 256MB DDR3	No	No	16MB QSPI	No
Avalanche	Microsemi PolarFire	MPF300TS	100MHz	IOs	16-bit 256MB DDR3	No	1Gbps RGMII*	8MB QSPI*	No
Basys3	Xilinx Artix7	XC7A35T	100MHz	FTDI	No	No	No	4MB QSPI	No
C10LPRefKit	Intel Cyclone10	10CL055	50MHz	FTDI	16-bit 32MB SDR	No	100Mbps MII	16MB QSPI	No
CYC1000	Intel Cyclone10	10CL025	50MHz	FTDI	16-bit 64MB SDR	No	No	16MB QSPI*	No
De0Nano	Intel Cyclone4	EP4CE22F	50MHz	FTDI	16-bit 32MB SDR	No	No	No	No
De10Lite	Intel MAX10	10M50DA	50MHz	IOs	16-bit 64MB SDR	No	No	No	No
DECA	Intel MAX10	10M50DA	50MHz	JTAG	16-bit 512MB DDR3*	No	Yes	No	Yes
De10Nano	Intel Cyclone5	5CSEBA6	50MHz	IOs	16-bit 32MB SDR	No	No	No	Yes
Arrow SoCKit	Intel Cyclone5	5CSXFC6D6F31C8	50MHz	JTAG	32-bit 1GB DDR3*	No	No	No	No
De1SoC	Intel Cyclone5	5CSEMA5	50MHz	IOs	16-bit 64MB SDR	No	?	?	?
De2-115	Intel Cyclone4	EP4CE115	50MHz	IOs	16-bit 128MB SDR	No	1Gbps GMII*	8MB QSPI	Yes*
ECP5-EVN	Lattice ECP5	LFE5UM5G-85F	50MHz	FTDI	No	No	?	?	?
Genesys2	Xilinx Kintex7	XC7K325T	125MHz	FTDI	32-bit 1GB DDR3	No	1Gbps RGMII	32MB QSPI*	Yes
KC705	Xilinx Kintex7	XC7K325T	125MHz	FTDI	64-bit 1GB DDR3	Gen2 X8**	1Gbps GMII	32MB QSPI*	Yes
KCU105	Xilinx KintexU	XCKU40	125MHz	FTDI	64-bit 1GB DDR4	Gen3 X8**	1Gbps-BASE-X	64MB QSPI*	Yes
KX2	Xilinx Kintex7	XC7K160T	125MHz	FTDI	64-bit 1GB DDR3	No	No	64MB QSPI*	No
LiteFury	Xilinx Artix7	XC7A100T	100MHz	PCIe	16-bit 512MB DDR3	Gen2 X4	No	32MB QSPI*	No
MachXO3	Lattice MachXO3	LCMXO3L-6900C	125MHz	?	?	No	No	?	No
Mercury XU5	Xilinx ZynqU+	XCZU2EG	125MHz	FTDI	16-bit 512MB DDR4	No	No	64MB QSPI*	No
Mimas A7	Xilinx Artix7	XC7A50T	100MHz	FTDI	16-bit 256MB DDR3	No	1Gbps RGMII	16MB QSPI	No
Nereid	Xilinx Kintex7	XC7K160T	100MHz	PCIe	64-bit 4GB DDR3	Gen2 X4	No	16MB QSPI	No
Nexys4DDR	Xilinx Artix7	XC7A100T	100MHz	FTDI	16-bit 128MB DDR2	No	100Mbps RMII	16MB QSPI*	Yes
Nexys Video	Xilinx Artix7	XC7A200T	100MHz	FTDI	16-bit 512MB DDR3	No	1Gbps RMII	32MB QSPI*	Yes
QMTech XC7A35T	Xilinx Artix7	XC7A35T	100MHz	FTDI	16-bit 256MB DDR3	No	1Gbps GMII**	16MB QSPI	Yes**
QMTech Wukong1	Xilinx Artix7	XC7A100T	100MHz	FTDI	16-bit 256MB DDR3	No	1Gbps GMII	16MB QSPI	Yes**
QMTech Wukong2	Xilinx Artix7	XC7A100T/200T	100MHz	FTDI	16-bit 256MB DDR3	No	1Gbps GMII	16MB QSPI	Yes
RZ-EasyFPGA	Intel Cyclone4	EP4CE6	50MHz	IOs	16-bit 8MB SDR	No	No	No	No
SP605	Xilinx Spartan6	XC6SLX45T	100MHz	FTDI	16-bit 128MB DDR3*	Gen1 X1*	1Gbps GMII	8MB QSPI*	Yes*
Tagus	Xilinx Artix7	XC7A200T	100MHz	PCIe	16-bit 256MB DDR3	Gen2 X1	1Gbps-BASE-X*	16MB QSPI*	No
VC707	Xilinx Virex7	XC7VX485T	125MHz	FTDI	64-bit 1GB DDR3	Gen3 X8*	1Gbps GMII	16MB QSPI*	Yes*
VCU118	Xilinx VirtexU+	XCVU9P	125MHz	FTDI	2 x 64-bit 4GB DDR4	Gen3 X16*	1Gbps SGMII	16MB QSPI*	Yes*
Versa ECP5	Lattice ECP5	LFE5UM5G-45F	75MHz	FTDI	16-bit 128MB DDR3	Gen1 X1*	1Gbps RGMII	16MB QSPI*	No
ZCU104	Xilinx ZynqU+	XCZU7EV	125MHz	FTDI	64-bit 1GB DDR4	No	1Gbps RGMII*	64MB QSPI*	Yes*
Zybo Z7	Xilinx Zynq	XC7Z010	125MHz	FTDI	64-bit 1GB DDR4	No	1Gbps RGMII*	64MB QSPI*	Yes*

* Present on the board but not yet supported or validated with LiteX. ** available on the daughterboard