litex-boards/litex_boards/targets/icebreaker.py

187 lines
8.0 KiB
Python
Executable File

#!/usr/bin/env python3
# This file is Copyright (c) 2019 Sean Cross <sean@xobs.io>
# This file is Copyright (c) 2018 David Shah <dave@ds0.me>
# This file is Copyright (c) 2020 Piotr Esden-Tempski <piotr@esden.net>
# License: BSD
# This target was originally based on the Fomu target.
import argparse
from migen import *
from migen.genlib.resetsync import AsyncResetSynchronizer
from litex.soc.cores import up5kspram, spi_flash
from litex.soc.integration.soc_core import SoCCore
from litex.soc.integration.builder import Builder, builder_argdict, builder_args
from litex.soc.integration.soc_core import soc_core_argdict, soc_core_args
from litex.soc.integration.doc import AutoDoc
from litex_boards.platforms.icebreaker import Platform
from litex.soc.interconnect import wishbone
from litex.soc.cores.uart import UARTWishboneBridge
from litex.soc.cores.gpio import GPIOOut
class JumpToAddressROM(wishbone.SRAM):
def __init__(self, size, addr):
data = [
0x00000537 | ((addr & 0xfffff000) << 0), # lui a0,%hi(addr)
0x00052503 | ((addr & 0x00000fff) << 20), # lw a0,%lo(addr)(a0)
0x000500e7, # jalr a0
]
wishbone.SRAM.__init__(self, size, read_only=True, init=data)
# CRG ----------------------------------------------------------------------------------------------
class _CRG(Module):
def __init__(self, platform):
self.clock_domains.cd_sys = ClockDomain()
self.clock_domains.cd_por = ClockDomain()
self.reset = Signal()
# # #
reset_delay = Signal(12, reset=4095)
# Clocks
clk12 = platform.request("clk12")
platform.add_period_constraint(clk12, 1e9/12e6)
self.comb += self.cd_sys.clk.eq(clk12)
self.comb += self.cd_por.clk.eq(clk12)
self.comb += self.cd_sys.rst.eq(reset_delay != 0)
# Power On Reset
self.sync.por += If(reset_delay != 0, reset_delay.eq(reset_delay - 1))
self.specials += AsyncResetSynchronizer(self.cd_por, self.reset)
# BaseSoC ------------------------------------------------------------------------------------------
class BaseSoC(SoCCore):
"""A SoC on iCEBreaker, optionally with a softcore CPU"""
# Statically-define the memory map, to prevent it from shifting across various litex versions.
SoCCore.mem_map = {
"rom": 0x00000000, # (default shadow @0x80000000)
"sram": 0x10000000, # (default shadow @0xa0000000)
"spiflash": 0x20000000, # (default shadow @0xa0000000)
"csr": 0xe0000000, # (default shadow @0x60000000)
"vexriscv_debug": 0xf00f0000,
}
def __init__(self, debug=True, boot_vector=0x2001a000, **kwargs):
"""Create a basic SoC for iCEBreaker.
Create a basic SoC for iCEBreaker. The `sys` frequency will run at 12 MHz.
Returns:
Newly-constructed SoC
"""
platform = Platform()
kwargs["cpu_variant"] = "lite"
kwargs["cpu_reset_address"] = boot_vector
if debug:
kwargs["uart_name"] = "crossover"
kwargs["cpu_variant"] = "lite+debug"
clk_freq = int(12e6)
# Force the SRAM size to 0, because we add our own SRAM with SPRAM
kwargs["integrated_sram_size"] = 0
kwargs["integrated_rom_size"] = 0
SoCCore.__init__(self, platform, clk_freq, **kwargs)
# If there is a VexRiscv CPU, add a fake ROM that simply tells the CPU
# to jump to the given address.
if hasattr(self, "cpu") and self.cpu.name == "vexriscv":
self.add_memory_region("rom", 0, 16)
self.submodules.rom = JumpToAddressROM(16, boot_vector)
self.submodules.crg = _CRG(platform)
# UP5K has single port RAM, which is a dedicated 128 kilobyte block.
# Use this as CPU RAM.
spram_size = 128 * 1024
self.submodules.spram = up5kspram.Up5kSPRAM(size=spram_size)
self.register_mem("sram", self.mem_map["sram"], self.spram.bus, spram_size)
# The litex SPI module supports memory-mapped reads, as well as a bit-banged mode
# for doing writes.
spi_pads = platform.request("spiflash4x")
self.submodules.lxspi = spi_flash.SpiFlash(spi_pads, dummy=6, endianness="little")
self.register_mem("spiflash", self.mem_map["spiflash"], self.lxspi.bus, size=16 * 1024 * 1024)
self.add_csr("lxspi")
# In debug mode, add a UART bridge. This takes over from the normal UART bridge,
# however you can use the "crossover" UART to communicate with this over the bridge.
if debug:
self.submodules.uart_bridge = UARTWishboneBridge(platform.request("serial"), clk_freq, baudrate=115200)
self.add_wb_master(self.uart_bridge.wishbone)
if hasattr(self, "cpu") and self.cpu.name == "vexriscv":
self.register_mem("vexriscv_debug", 0xf00f0000, self.cpu.debug_bus, 0x100)
self.submodules.leds = GPIOOut(Cat(
platform.request("user_ledr_n"),
platform.request("user_ledg_n")))
self.add_csr("leds")
# self.add_memory_region("rom", 0x2001a000, 16 * 1024 * 1024 - 0x1a000, type="cached+linker")
# self.add_memory_region("boot", 0, 16, type="cached+linker")
# self.mem_regions["rom"] = SoCMemRegion(0x2001a000, 16 * 1024 * 1024 - 0x1a000, "cached")
# self.mem_regions["boot"] = SoCMemRegion(0, 16, "cached")
def set_yosys_nextpnr_settings(self, nextpnr_seed=0, nextpnr_placer="heap"):
"""Set Yosys/Nextpnr settings by overriding default LiteX's settings.
Args:
nextpnr_seed (int): Seed to use in Nextpnr
nextpnr_placer (str): Placer to use in Nextpnr
"""
assert hasattr(self.platform.toolchain, "yosys_template")
assert hasattr(self.platform.toolchain, "build_template")
self.platform.toolchain.yosys_template = [
"{read_files}",
"attrmap -tocase keep -imap keep=\"true\" keep=1 -imap keep=\"false\" keep=0 -remove keep=0",
# Use "-relut -dffe_min_ce_use 4" to the synth_ice40 command. The "-reult" adds an additional
# LUT pass to pack more stuff in, and the "-dffe_min_ce_use 4" flag prevents Yosys from
# generating a Clock Enable signal for a LUT that has fewer than 4 flip-flops. This increases
# density, and lets us use the FPGA more efficiently.
"synth_ice40 -json {build_name}.json -top {build_name} -relut -abc2 -dffe_min_ce_use 4 -relut",
]
self.platform.toolchain.build_template = [
"yosys -q -l {build_name}.rpt {build_name}.ys",
"nextpnr-ice40 --json {build_name}.json --pcf {build_name}.pcf --asc {build_name}.txt"
+ " --pre-pack {build_name}_pre_pack.py --{architecture} --package {package}"
+ " --seed {}".format(nextpnr_seed)
+ " --placer {}".format(nextpnr_placer),
# Disable final deep-sleep power down so firmware words are loaded onto softcore's address bus.
"icepack -s {build_name}.txt {build_name}.bin"
]
# Build --------------------------------------------------------------------------------------------
def main():
parser = argparse.ArgumentParser(description="LiteX SoC on iCEBreaker")
parser.add_argument("--nextpnr-seed", default=0, help="Seed to use in Nextpnr")
parser.add_argument("--nextpnr-placer", default="heap", choices=["sa", "heap"], help="Placer implementation to use in Nextpnr")
builder_args(parser)
soc_core_args(parser)
args = parser.parse_args()
soc = BaseSoC(debug=True, **soc_core_argdict(args))
soc.set_yosys_nextpnr_settings(nextpnr_seed=args.nextpnr_seed, nextpnr_placer=args.nextpnr_placer)
# Don't build software -- we don't include it since we just jump to SPI flash.
builder_kwargs = builder_argdict(args)
builder_kwargs["compile_software"] = False
builder = Builder(soc, **builder_kwargs)
builder.build()
if __name__ == "__main__":
main()