246 lines
10 KiB
Python
Executable File
246 lines
10 KiB
Python
Executable File
#!/usr/bin/env python3
|
|
|
|
#
|
|
# This file is part of LiteX-Boards.
|
|
#
|
|
# Copyright (c) 2021 Florent Kermarrec <florent@enjoy-digital.fr>
|
|
# Copyright (c) 2022 Lukas F. Hartmann, MNT Research GmbH <lukas@mntre.com>
|
|
# SPDX-License-Identifier: BSD-2-Clause
|
|
|
|
from migen import *
|
|
from migen.fhdl.specials import Tristate
|
|
|
|
from litex.gen import *
|
|
|
|
from litex_boards.platforms import mnt_rkx7
|
|
|
|
|
|
from litex.soc.integration.soc_core import *
|
|
from litex.soc.integration.soc import SoCRegion
|
|
from litex.soc.integration.builder import *
|
|
from litex.soc.interconnect.csr import *
|
|
from litex.soc.interconnect.axi import *
|
|
from litex.soc.interconnect.wishbone import *
|
|
|
|
from litex.soc.cores.clock import *
|
|
from litex.soc.cores.bitbang import I2CMaster
|
|
from litex.soc.cores.gpio import GPIOOut
|
|
from litex.soc.cores.video import VideoDVIPHY
|
|
from litex.soc.cores.usb_ohci import USBOHCI
|
|
|
|
from litedram.modules import IS43TR16512B
|
|
from litedram.phy import s7ddrphy
|
|
|
|
from liteeth.phy.s7rgmii import LiteEthPHYRGMII
|
|
|
|
# CRG ----------------------------------------------------------------------------------------------
|
|
|
|
class _CRG(LiteXModule):
|
|
def __init__(self, platform, sys_clk_freq):
|
|
self.rst = Signal()
|
|
self.cd_sys = ClockDomain()
|
|
self.cd_sys4x = ClockDomain()
|
|
self.cd_idelay = ClockDomain()
|
|
self.cd_dvi = ClockDomain(reset_less=True)
|
|
self.cd_usb = ClockDomain()
|
|
self.cd_hdmi = ClockDomain(reset_less=True)
|
|
|
|
clkin = platform.request("clk100")
|
|
|
|
self.pll = pll = S7MMCM(speedgrade=-2)
|
|
self.comb += pll.reset.eq(self.rst)
|
|
# Main clock input (100MHz)
|
|
pll.register_clkin(clkin, 100e6)
|
|
pll.create_clkout(self.cd_sys, sys_clk_freq)
|
|
pll.create_clkout(self.cd_sys4x, 4*sys_clk_freq)
|
|
pll.create_clkout(self.cd_idelay, 200e6)
|
|
# Ignore sys_clk to pll.clkin path created by SoC's rst.
|
|
platform.add_false_path_constraints(self.cd_sys.clk, pll.clkin)
|
|
|
|
# USB clock
|
|
pll.create_clkout(self.cd_usb, int(48e6))
|
|
|
|
# HDMI 640x480 clock
|
|
pll.create_clkout(self.cd_hdmi, int(25e6))
|
|
|
|
self.pll2 = pll2 = S7MMCM(speedgrade=-2)
|
|
self.comb += pll2.reset.eq(self.rst)
|
|
pll2.register_clkin(clkin, 100e6)
|
|
# DVI pixel clock
|
|
pll2.create_clkout(self.cd_dvi, 80e6) # display wants 162e6, but we can underclock
|
|
platform.add_false_path_constraints(self.cd_sys.clk, pll2.clkin)
|
|
|
|
self.idelayctrl = S7IDELAYCTRL(self.cd_idelay)
|
|
|
|
# BaseSoC ------------------------------------------------------------------------------------------
|
|
|
|
class BaseSoC(SoCCore):
|
|
mem_map = {**SoCCore.mem_map, **{
|
|
# FIXME: ends up as 0x7f000000 in linux
|
|
"video_framebuffer": 0x3f000000,
|
|
"usb_ohci" : 0xc0000000,
|
|
}}
|
|
|
|
def __init__(self, sys_clk_freq=100e6,
|
|
with_ethernet = True,
|
|
with_etherbone = False,
|
|
with_spi_flash = True,
|
|
with_usb_host = True,
|
|
with_analyzer = False,
|
|
**kwargs):
|
|
platform = mnt_rkx7.Platform()
|
|
|
|
# CRG --------------------------------------------------------------------------------------
|
|
self.crg = _CRG(platform, sys_clk_freq)
|
|
|
|
# SoCCore ----------------------------------------------------------------------------------
|
|
#kwargs["with_jtagbone"] = True
|
|
SoCCore.__init__(self, platform, sys_clk_freq, ident="LiteX SoC on MNT-RKX7", **kwargs)
|
|
|
|
# DDR3 SDRAM -------------------------------------------------------------------------------
|
|
if not self.integrated_main_ram_size:
|
|
self.ddrphy = s7ddrphy.K7DDRPHY(platform.request("ddram"),
|
|
memtype = "DDR3",
|
|
nphases = 4,
|
|
sys_clk_freq = sys_clk_freq)
|
|
self.add_sdram("sdram",
|
|
phy = self.ddrphy,
|
|
module = IS43TR16512B(sys_clk_freq, "1:4"),
|
|
size = 0x40000000,
|
|
l2_cache_size = kwargs.get("l2_size", 8192), # TBD: is L2 really necessary?
|
|
)
|
|
|
|
# SPI Flash --------------------------------------------------------------------------------
|
|
if with_spi_flash:
|
|
from litespi.modules import W25Q128JV
|
|
from litespi.opcodes import SpiNorFlashOpCodes as Codes
|
|
self.add_spi_flash(mode="4x", module=W25Q128JV(Codes.READ_1_1_4), rate="1:1", with_master=True)
|
|
|
|
# Ethernet / Etherbone ---------------------------------------------------------------------
|
|
if with_ethernet or with_etherbone:
|
|
self.ethphy = LiteEthPHYRGMII(
|
|
clock_pads = self.platform.request("eth_clocks"),
|
|
pads = self.platform.request("eth"))
|
|
platform.add_platform_command("set_property CLOCK_DEDICATED_ROUTE FALSE [get_nets {{main_ethphy_eth_rx_clk_ibuf}}]")
|
|
platform.add_platform_command("set_property CLOCK_DEDICATED_ROUTE FALSE [get_nets {{soclinux_ethphy_eth_rx_clk_ibuf}}]")
|
|
if with_ethernet:
|
|
self.add_ethernet(phy=self.ethphy, dynamic_ip=True, software_debug=False)
|
|
if with_etherbone:
|
|
self.add_etherbone(phy=self.ethphy)
|
|
|
|
# GPIO -------------------------------------------------------------------------------------
|
|
# Controllable as faux "leds"
|
|
# These are reset pins of various chips
|
|
# We toggle them in LiteX BIOS
|
|
reset_signals = platform.request("resets")
|
|
self.comb += reset_signals.eq(Signal(6, reset=0b111111))
|
|
|
|
gpio_signals = platform.request("gpio")
|
|
self.leds = GPIOOut(gpio_signals)
|
|
|
|
# Additional I2C Ports ---------------------------------------------------------------------
|
|
self.i2c0 = I2CMaster(platform.request("i2c", 0))
|
|
self.i2c1 = I2CMaster(platform.request("i2c", 1))
|
|
self.i2c2 = I2CMaster(platform.request("i2c", 2))
|
|
|
|
# Backlight --------------------------------------------------------------------------------
|
|
# Motherboard display connector backlight, currently unused (the new backlight signals
|
|
# are on the 50pin RGB->eDP connector)
|
|
backlight = platform.request("backlight")
|
|
self.comb += backlight.en.eq(Signal(reset=1))
|
|
self.comb += backlight.pwm.eq(Signal(reset=1))
|
|
|
|
# eDP --------------------------------------------------------------------------------------
|
|
video_timings = ("1920x1080@rkx7", {
|
|
"pix_clk" : 162e6,
|
|
"h_active" : 1920,
|
|
"h_blanking" : 159, # off by one in vtg
|
|
"h_sync_offset" : 40,
|
|
"h_sync_width" : 40,
|
|
"v_active" : 1080,
|
|
"v_blanking" : 32,
|
|
"v_sync_offset" : 4,
|
|
"v_sync_width" : 4,
|
|
})
|
|
self.videophy = VideoDVIPHY(platform.request("edp"), clock_domain="dvi")
|
|
self.add_video_framebuffer(phy=self.videophy, timings=video_timings, clock_domain="dvi")
|
|
|
|
# HDMI -------------------------------------------------------------------------------------
|
|
# Untested: 2x framebuffers in parallel
|
|
self.videophy_hdmi = VideoDVIPHY(platform.request("hdmi"), clock_domain="hdmi")
|
|
self.add_video_terminal(phy=self.videophy_hdmi, timings="640x480@75Hz", clock_domain="hdmi")
|
|
|
|
# USB Host ---------------------------------------------------------------------------------
|
|
if with_usb_host:
|
|
self.usb_ohci = USBOHCI(platform, platform.request("usb"))
|
|
self.bus.add_slave("usb_ohci_ctrl", self.usb_ohci.wb_ctrl, region=SoCRegion(origin=self.mem_map["usb_ohci"], size=0x100000, cached=False))
|
|
dma_bus = getattr(self, "dma_bus", self.bus)
|
|
dma_bus.add_master("usb_ohci_dma", master=self.usb_ohci.wb_dma)
|
|
self.comb += self.cpu.interrupt[16].eq(self.usb_ohci.interrupt)
|
|
|
|
# LiteScope Analyzer -----------------------------------------------------------------------
|
|
if with_analyzer:
|
|
from litescope import LiteScopeAnalyzer
|
|
self.add_uartbone(uart_name="debug_serial")
|
|
analyzer_signals = [
|
|
ulpi_data.din,
|
|
utmi.linestate,
|
|
utmi.txvalid,
|
|
utmi.rxerror,
|
|
utmi.rxvalid,
|
|
usb_ulpi.dir,
|
|
usb_ulpi.stp,
|
|
usb_ulpi.nxt,
|
|
usbh_dbg_state,
|
|
ulpi_dbg_state,
|
|
usb_host_intr,
|
|
usb_host_dbg_intr,
|
|
]
|
|
self.analyzer = LiteScopeAnalyzer(analyzer_signals,
|
|
depth = 256,
|
|
clock_domain = "ulpi",
|
|
csr_csv = "analyzer.csv"
|
|
)
|
|
|
|
# Build --------------------------------------------------------------------------------------------
|
|
|
|
def main():
|
|
from litex.build.parser import LiteXArgumentParser
|
|
parser = LiteXArgumentParser(platform=mnt_rkx7.Platform, description="LiteX SoC on MNT-RKX7.")
|
|
parser.add_target_argument("--sys-clk-freq", default=100e6, type=float, help="System clock frequency.")
|
|
parser.add_target_argument("--with-spi-flash", action="store_true", default=True, help="Enable SPI Flash (MMAPed).")
|
|
parser.add_target_argument("--with-usb-host", action="store_true", default=True, help="Enable USB host support.")
|
|
sdopts = parser.target_group.add_mutually_exclusive_group()
|
|
sdopts.add_argument("--with-spi-sdcard", action="store_true", help="Enable SPI-mode SDCard support.")
|
|
sdopts.add_argument("--with-sdcard", action="store_true", default=True, help="Enable SDCard support.")
|
|
ethopts = parser.target_group.add_mutually_exclusive_group()
|
|
ethopts.add_argument("--with-ethernet", action="store_true", default=True, help="Enable Ethernet support.")
|
|
ethopts.add_argument("--with-etherbone", action="store_true", help="Enable Etherbone support.")
|
|
args = parser.parse_args()
|
|
|
|
soc = BaseSoC(
|
|
sys_clk_freq = args.sys_clk_freq,
|
|
with_ethernet = args.with_ethernet,
|
|
with_etherbone = args.with_etherbone,
|
|
with_spi_flash = args.with_spi_flash,
|
|
with_usb_host = args.with_usb_host,
|
|
**parser.soc_argdict
|
|
)
|
|
if args.with_spi_sdcard:
|
|
soc.add_spi_sdcard()
|
|
if args.with_sdcard:
|
|
soc.add_sdcard()
|
|
|
|
args.csr_csv="csr.csv"
|
|
|
|
builder = Builder(soc, **parser.builder_argdict)
|
|
if args.build:
|
|
builder.build(**parser.toolchain_argdict)
|
|
|
|
if args.load:
|
|
prog = soc.platform.create_programmer()
|
|
prog.load_bitstream(builder.get_bitstream_filename(mode="sram"))
|
|
|
|
if __name__ == "__main__":
|
|
main()
|