178 lines
7.2 KiB
Python
Executable File
178 lines
7.2 KiB
Python
Executable File
#!/usr/bin/env python3
|
|
'''
|
|
---------------------
|
|
LiteX SoC on Marble
|
|
---------------------
|
|
with support for SO-DIMM DDR3, ethernet and UART.
|
|
To synthesize, add --build, to configure the FPGA over jtag, add --load.
|
|
|
|
-----------------
|
|
Example configs
|
|
-----------------
|
|
with ethernet and DDR3, default IP: 192.168.1.50/24
|
|
./marble.py --with-ethernet --with-bist --spd-dump VR7PU286458FBAMJT.txt
|
|
|
|
lightweight config
|
|
./marble.py --integrated-main-ram-size 16384 --cpu-type serv
|
|
|
|
etherbone: access wishbone over ethernet
|
|
./marble.py --with-etherbone --csr-csv build/csr.csv
|
|
|
|
make sure reset is not asserted (RTS signal), set PC IP to 192.168.1.100/24,
|
|
then test and benchmark the etherbone link:
|
|
cd build
|
|
litex/liteeth/bench/test_etherbone.py --udp --ident --access --sram --speed
|
|
'''
|
|
|
|
from migen import *
|
|
|
|
from litex_boards.platforms import berkeleylab_marble
|
|
|
|
from litex.soc.cores.clock import *
|
|
from litex.soc.integration.soc_core import *
|
|
from litex.soc.integration.builder import *
|
|
from litex.soc.cores.led import LedChaser
|
|
from litex.soc.cores.bitbang import I2CMaster
|
|
|
|
from litedram.modules import MT8JTF12864, parse_spd_hexdump, SDRAMModule
|
|
from litedram.phy import s7ddrphy
|
|
|
|
from liteeth.phy.s7rgmii import LiteEthPHYRGMII
|
|
|
|
# CRG ----------------------------------------------------------------------------------------------
|
|
|
|
class _CRG(Module):
|
|
def __init__(self, platform, sys_clk_freq, resets=[]):
|
|
self.rst = Signal()
|
|
self.clock_domains.cd_sys = ClockDomain()
|
|
self.clock_domains.cd_sys4x = ClockDomain()
|
|
self.clock_domains.cd_sys4x_dqs = ClockDomain()
|
|
self.clock_domains.cd_idelay = ClockDomain()
|
|
|
|
# # #
|
|
|
|
self.submodules.pll = pll = S7MMCM(speedgrade=-2)
|
|
|
|
resets.append(self.rst)
|
|
self.comb += pll.reset.eq(reduce(or_, resets))
|
|
pll.register_clkin(platform.request("clk125"), 125e6)
|
|
pll.create_clkout(self.cd_sys, sys_clk_freq)
|
|
pll.create_clkout(self.cd_sys4x, 4*sys_clk_freq)
|
|
pll.create_clkout(self.cd_sys4x_dqs, 4*sys_clk_freq, phase=90)
|
|
pll.create_clkout(self.cd_idelay, 200e6)
|
|
platform.add_false_path_constraints(self.cd_sys.clk, pll.clkin) # Ignore sys_clk to pll.clkin path created by SoC's rst.
|
|
|
|
self.submodules.idelayctrl = S7IDELAYCTRL(self.cd_idelay)
|
|
|
|
# BaseSoC ------------------------------------------------------------------------------------------
|
|
|
|
class BaseSoC(SoCCore):
|
|
def __init__(self, sys_clk_freq=int(125e6),
|
|
with_ethernet = False,
|
|
with_etherbone = False,
|
|
with_rts_reset = False,
|
|
with_led_chaser = True,
|
|
spd_dump = None,
|
|
**kwargs
|
|
):
|
|
platform = berkeleylab_marble.Platform()
|
|
|
|
# CRG, resettable over USB serial RTS signal -----------------------------------------------
|
|
resets = []
|
|
if with_rts_reset:
|
|
ser_pads = platform.lookup_request('serial')
|
|
resets.append(ser_pads.rts)
|
|
self.submodules.crg = _CRG(platform, sys_clk_freq, resets)
|
|
|
|
# SoCCore ----------------------------------------------------------------------------------
|
|
SoCCore.__init__(self, platform, sys_clk_freq, ident="LiteX SoC on Berkeley-Lab Marble", **kwargs)
|
|
|
|
# DDR3 SDRAM -------------------------------------------------------------------------------
|
|
if not self.integrated_main_ram_size:
|
|
self.submodules.ddrphy = s7ddrphy.K7DDRPHY(
|
|
platform.request("ddram"),
|
|
memtype = "DDR3",
|
|
nphases = 4,
|
|
sys_clk_freq = sys_clk_freq
|
|
)
|
|
|
|
if spd_dump is not None:
|
|
ram_spd = parse_spd_hexdump(spd_dump)
|
|
ram_module = SDRAMModule.from_spd_data(ram_spd, sys_clk_freq)
|
|
print('DDR3: loaded config from', spd_dump)
|
|
else:
|
|
ram_module = MT8JTF12864(sys_clk_freq, "1:4") # KC705 chip, 1 GB
|
|
print('DDR3: No spd data specified, falling back to MT8JTF12864')
|
|
|
|
self.add_sdram("sdram",
|
|
phy = self.ddrphy,
|
|
module = ram_module,
|
|
# size=0x40000000, # Limit its size to 1 GB
|
|
l2_cache_size = kwargs.get("l2_size", 8192),
|
|
with_bist = kwargs.get("with_bist", False)
|
|
)
|
|
|
|
# Ethernet ---------------------------------------------------------------------------------
|
|
if with_ethernet or with_etherbone:
|
|
self.submodules.ethphy = LiteEthPHYRGMII(
|
|
clock_pads = self.platform.request("eth_clocks"),
|
|
pads = self.platform.request("eth"),
|
|
tx_delay = 0
|
|
)
|
|
|
|
if with_ethernet:
|
|
self.add_ethernet(
|
|
phy = self.ethphy,
|
|
dynamic_ip = True,
|
|
software_debug = False
|
|
)
|
|
|
|
if with_etherbone:
|
|
self.add_etherbone(phy=self.ethphy, buffer_depth=255)
|
|
|
|
# System I2C (behing multiplexer) ----------------------------------------------------------
|
|
i2c_pads = platform.request('i2c_fpga')
|
|
self.submodules.i2c = I2CMaster(i2c_pads)
|
|
|
|
# Leds -------------------------------------------------------------------------------------
|
|
if with_led_chaser:
|
|
self.submodules.leds = LedChaser(
|
|
pads = platform.request_all("user_led"),
|
|
sys_clk_freq = sys_clk_freq)
|
|
|
|
# Build --------------------------------------------------------------------------------------------
|
|
|
|
def main():
|
|
from litex.soc.integration.soc import LiteXSoCArgumentParser
|
|
parser = LiteXSoCArgumentParser(description="LiteX SoC on BerkeleyLab Marble")
|
|
target_group = parser.add_argument_group(title="Target options")
|
|
target_group.add_argument("--build", action="store_true", help="Build bitstream.")
|
|
target_group.add_argument("--load", action="store_true", help="Load bitstream.")
|
|
target_group.add_argument("--sys-clk-freq", default=125e6, help="System clock frequency.")
|
|
target_group.add_argument("--with-ethernet", action="store_true", help="Enable Ethernet support.")
|
|
target_group.add_argument("--with-etherbone", action="store_true", help="Enable Etherbone support.")
|
|
target_group.add_argument("--with-rts-reset", action="store_true", help="Connect UART RTS line to sys_clk reset.")
|
|
target_group.add_argument("--with-bist", action="store_true", help="Add DDR3 BIST Generator/Checker.")
|
|
target_group.add_argument("--spd-dump", type=str, help="DDR3 configuration file, dumped using the `spdread` command in LiteX BIOS.")
|
|
builder_args(parser)
|
|
soc_core_args(parser)
|
|
args = parser.parse_args()
|
|
|
|
soc = BaseSoC(
|
|
sys_clk_freq = int(float(args.sys_clk_freq)),
|
|
with_ethernet = args.with_ethernet,
|
|
with_etherbone = args.with_etherbone,
|
|
with_bist = args.with_bist,
|
|
spd_dump = args.spd_dump,
|
|
**soc_core_argdict(args)
|
|
)
|
|
builder = Builder(soc, **builder_argdict(args))
|
|
builder.build(run=args.build)
|
|
|
|
if args.load:
|
|
prog = soc.platform.create_programmer()
|
|
prog.load_bitstream(builder.get_bitstream_filename(mode="sram"))
|
|
|
|
if __name__ == "__main__":
|
|
main()
|