litex-boards/litex_boards/targets/digilent_arty.py

214 lines
9.3 KiB
Python
Executable File

#!/usr/bin/env python3
#
# This file is part of LiteX-Boards.
#
# Copyright (c) 2015-2019 Florent Kermarrec <florent@enjoy-digital.fr>
# Copyright (c) 2020 Antmicro <www.antmicro.com>
# Copyright (c) 2022 Victor Suarez Rovere <suarezvictor@gmail.com>
# SPDX-License-Identifier: BSD-2-Clause
# Note: For now with --toolchain=yosys+nextpnr:
# - DDR3 should be disabled: ex --integrated-main-ram-size=8192
# - Clk Freq should be lowered: ex --sys-clk-freq=50e6
from migen import *
from litex.gen import LiteXModule
from litex_boards.platforms import digilent_arty
from litex.soc.cores.clock import *
from litex.soc.integration.soc import SoCRegion
from litex.soc.integration.soc_core import *
from litex.soc.integration.builder import *
from litex.soc.cores.led import LedChaser
from litex.soc.cores.gpio import GPIOIn, GPIOTristate
from litex.soc.cores.xadc import XADC
from litex.soc.cores.dna import DNA
from litedram.modules import MT41K128M16
from litedram.phy import s7ddrphy
from liteeth.phy.mii import LiteEthPHYMII
# CRG ----------------------------------------------------------------------------------------------
class _CRG(LiteXModule):
def __init__(self, platform, sys_clk_freq, with_dram=True, with_rst=True):
self.rst = Signal()
self.cd_sys = ClockDomain()
self.cd_eth = ClockDomain()
if with_dram:
self.cd_sys4x = ClockDomain()
self.cd_sys4x_dqs = ClockDomain()
self.cd_idelay = ClockDomain()
# # #
# Clk/Rst.
clk100 = platform.request("clk100")
rst = ~platform.request("cpu_reset") if with_rst else 0
# PLL.
self.pll = pll = S7PLL(speedgrade=-1)
self.comb += pll.reset.eq(rst | self.rst)
pll.register_clkin(clk100, 100e6)
pll.create_clkout(self.cd_sys, sys_clk_freq)
pll.create_clkout(self.cd_eth, 25e6)
self.comb += platform.request("eth_ref_clk").eq(self.cd_eth.clk)
platform.add_false_path_constraints(self.cd_sys.clk, pll.clkin) # Ignore sys_clk to pll.clkin path created by SoC's rst.
if with_dram:
pll.create_clkout(self.cd_sys4x, 4*sys_clk_freq)
pll.create_clkout(self.cd_sys4x_dqs, 4*sys_clk_freq, phase=90)
pll.create_clkout(self.cd_idelay, 200e6)
# IdelayCtrl.
if with_dram:
self.idelayctrl = S7IDELAYCTRL(self.cd_idelay)
# BaseSoC ------------------------------------------------------------------------------------------
class BaseSoC(SoCCore):
def __init__(self, variant="a7-35", toolchain="vivado", sys_clk_freq=100e6,
with_ethernet = False,
with_etherbone = False,
eth_ip = "192.168.1.50",
eth_dynamic_ip = False,
with_led_chaser = True,
with_jtagbone = True,
with_spi_flash = False,
with_buttons = False,
with_pmod_gpio = False,
**kwargs):
platform = digilent_arty.Platform(variant=variant, toolchain=toolchain)
# CRG --------------------------------------------------------------------------------------
with_dram = (kwargs.get("integrated_main_ram_size", 0) == 0)
self.crg = _CRG(platform, sys_clk_freq, with_dram)
# SoCCore ----------------------------------------------------------------------------------
SoCCore.__init__(self, platform, sys_clk_freq, ident="LiteX SoC on Arty A7", **kwargs)
# XADC -------------------------------------------------------------------------------------
self.xadc = XADC()
# DNA --------------------------------------------------------------------------------------
self.dna = DNA()
self.dna.add_timing_constraints(platform, sys_clk_freq, self.crg.cd_sys.clk)
# DDR3 SDRAM -------------------------------------------------------------------------------
if not self.integrated_main_ram_size:
self.ddrphy = s7ddrphy.A7DDRPHY(platform.request("ddram"),
memtype = "DDR3",
nphases = 4,
sys_clk_freq = sys_clk_freq)
self.add_sdram("sdram",
phy = self.ddrphy,
module = MT41K128M16(sys_clk_freq, "1:4"),
l2_cache_size = kwargs.get("l2_size", 8192)
)
# Ethernet / Etherbone ---------------------------------------------------------------------
if with_ethernet or with_etherbone:
self.ethphy = LiteEthPHYMII(
clock_pads = self.platform.request("eth_clocks"),
pads = self.platform.request("eth"))
if with_ethernet:
self.add_ethernet(phy=self.ethphy, dynamic_ip=eth_dynamic_ip)
if with_etherbone:
self.add_etherbone(phy=self.ethphy, ip_address=eth_ip)
# Jtagbone ---------------------------------------------------------------------------------
if with_jtagbone:
self.add_jtagbone()
# SPI Flash --------------------------------------------------------------------------------
if with_spi_flash:
from litespi.modules import S25FL128L
from litespi.opcodes import SpiNorFlashOpCodes as Codes
self.add_spi_flash(mode="4x", module=S25FL128L(Codes.READ_1_1_4), rate="1:2", with_master=True)
# Leds -------------------------------------------------------------------------------------
if with_led_chaser:
self.leds = LedChaser(
pads = platform.request_all("user_led"),
sys_clk_freq = sys_clk_freq,
)
# Buttons ----------------------------------------------------------------------------------
if with_buttons:
self.buttons = GPIOIn(
pads = platform.request_all("user_btn"),
with_irq = self.irq.enabled
)
# GPIOs ------------------------------------------------------------------------------------
if with_pmod_gpio:
platform.add_extension(digilent_arty.raw_pmod_io("pmoda"))
self.gpio = GPIOTristate(
pads = platform.request("pmoda"),
with_irq = self.irq.enabled
)
# Build --------------------------------------------------------------------------------------------
def main():
from litex.build.parser import LiteXArgumentParser
parser = LiteXArgumentParser(platform=digilent_arty.Platform, description="LiteX SoC on Arty A7.")
parser.add_target_argument("--flash", action="store_true", help="Flash bitstream.")
parser.add_target_argument("--variant", default="a7-35", help="Board variant (a7-35 or a7-100).")
parser.add_target_argument("--sys-clk-freq", default=100e6, type=float, help="System clock frequency.")
ethopts = parser.target_group.add_mutually_exclusive_group()
ethopts.add_argument("--with-ethernet", action="store_true", help="Enable Ethernet support.")
ethopts.add_argument("--with-etherbone", action="store_true", help="Enable Etherbone support.")
parser.add_target_argument("--eth-ip", default="192.168.1.50", help="Ethernet/Etherbone IP address.")
parser.add_target_argument("--eth-dynamic-ip", action="store_true", help="Enable dynamic Ethernet IP addresses setting.")
sdopts = parser.target_group.add_mutually_exclusive_group()
sdopts.add_argument("--with-spi-sdcard", action="store_true", help="Enable SPI-mode SDCard support.")
sdopts.add_argument("--with-sdcard", action="store_true", help="Enable SDCard support.")
parser.add_target_argument("--sdcard-adapter", help="SDCard PMOD adapter (digilent or numato).")
parser.add_target_argument("--with-jtagbone", action="store_true", help="Enable JTAGbone support.")
parser.add_target_argument("--with-spi-flash", action="store_true", help="Enable SPI Flash (MMAPed).")
parser.add_target_argument("--with-pmod-gpio", action="store_true", help="Enable GPIOs through PMOD.") # FIXME: Temporary test.
args = parser.parse_args()
assert not (args.with_etherbone and args.eth_dynamic_ip)
soc = BaseSoC(
variant = args.variant,
toolchain = args.toolchain,
sys_clk_freq = args.sys_clk_freq,
with_ethernet = args.with_ethernet,
with_etherbone = args.with_etherbone,
eth_ip = args.eth_ip,
eth_dynamic_ip = args.eth_dynamic_ip,
with_jtagbone = args.with_jtagbone,
with_spi_flash = args.with_spi_flash,
with_pmod_gpio = args.with_pmod_gpio,
**parser.soc_argdict
)
if args.sdcard_adapter == "numato":
soc.platform.add_extension(digilent_arty._numato_sdcard_pmod_io)
else:
soc.platform.add_extension(digilent_arty._sdcard_pmod_io)
if args.with_spi_sdcard:
soc.add_spi_sdcard()
if args.with_sdcard:
soc.add_sdcard()
builder = Builder(soc, **parser.builder_argdict)
if args.build:
builder.build(**parser.toolchain_argdict)
if args.load:
prog = soc.platform.create_programmer()
prog.load_bitstream(builder.get_bitstream_filename(mode="sram"))
if args.flash:
prog = soc.platform.create_programmer()
prog.flash(0, builder.get_bitstream_filename(mode="flash"))
if __name__ == "__main__":
main()