litex-boards/litex_boards/targets/rcs_arctic_tern_bmc_card.py

183 lines
7.7 KiB
Python
Executable File

#!/usr/bin/env python3
#
# This file is part of LiteX-Boards.
#
# Copyright (c) 2019 Arnaud Durand <arnaud.durand@unifr.ch>
# Copyright (c) 2022 Martin Hubacek @hubmartin (Twitter)
# Copyright (c) 2022 Raptor Engineering, LLC
# SPDX-License-Identifier: BSD-2-Clause
from migen import *
from migen.genlib.resetsync import AsyncResetSynchronizer
from litex.gen import LiteXModule
from litex_boards.platforms import rcs_arctic_tern_bmc_card
from litex.soc.cores.clock import *
from litex.soc.integration.soc_core import *
from litex.soc.integration.builder import *
from litex.soc.integration.soc import SoCRegion
from litedram.modules import MT41J256M16
from litedram.phy import ECP5DDRPHY
from liteeth.phy.ecp5rgmii import LiteEthPHYRGMII
from litex.soc.cores.video import VideoGenericPHY
# CRG ----------------------------------------------------------------------------------------------
class _CRG(LiteXModule):
def __init__(self, platform, sys_clk_freq):
self.rst = Signal()
self.cd_init = ClockDomain()
self.cd_por = ClockDomain()
self.cd_sys = ClockDomain()
self.cd_sys2x = ClockDomain()
self.cd_sys2x_i = ClockDomain()
self.cd_sys2x_eb = ClockDomain()
self.cd_dvo = ClockDomain()
# # #
self.stop = Signal()
self.reset = Signal()
# Clk / Rst
clk125 = platform.request("clk125")
rst_n = platform.request("rst_n")
self.clk_inv_alignwd = Signal()
self.sys_inv_clk_bridge = Signal()
self.sys_inv_clk_syncb = Signal()
# Power on reset
por_count = Signal(16, reset=2**16-1)
por_done = Signal()
self.comb += por_done.eq(por_count == 0)
self.sync.por += If(~por_done, por_count.eq(por_count - 1))
# PLL
sys2x_clk_ecsout = Signal()
self.pll = pll = ECP5PLL()
self.comb += pll.reset.eq(~por_done | ~rst_n | self.rst)
pll.register_clkin(clk125, 125e6)
pll.create_clkout(self.cd_sys2x_i, 2*sys_clk_freq)
pll.create_clkout(self.cd_init, 24e6)
self.specials += [
Instance("OSCG",
p_DIV = 128, # 2.4MHz
o_OSC = self.cd_por.clk),
Instance("ECLKBRIDGECS",
i_CLK0 = self.cd_sys2x_i.clk,
i_SEL = 0,
o_ECSOUT = sys2x_clk_ecsout),
Instance("ECLKSYNCB",
i_ECLKI = sys2x_clk_ecsout,
i_STOP = self.stop,
o_ECLKO = self.cd_sys2x.clk),
Instance("CLKDIVF",
p_DIV = "2.0",
i_ALIGNWD = 0,
i_CLKI = self.cd_sys2x.clk,
i_RST = self.reset,
o_CDIVX = self.cd_sys.clk),
AsyncResetSynchronizer(self.cd_sys, ~pll.locked | self.reset),
]
# Generate DVO clock
pll.create_clkout(self.cd_dvo, 40e6) # 800x600@60
#pll.create_clkout(self.cd_dvo, 148.35e6) # 1920x1080@60
#pll.create_clkout(self.cd_dvo, 148.2e6) # 1920x1200@60
# BaseSoC ------------------------------------------------------------------------------------------
class BaseSoC(SoCCore):
def __init__(self, sys_clk_freq=50e6, toolchain="trellis",
with_video_colorbars = False,
with_video_terminal = True,
with_video_framebuffer = False,
with_ethernet = False,
with_etherbone = False,
eth_ip = "192.168.1.50",
**kwargs):
platform = rcs_arctic_tern_bmc_card.Platform(toolchain=toolchain)
# CRG --------------------------------------------------------------------------------------
self.crg = _CRG(platform, sys_clk_freq)
# SoCCore ----------------------------------------------------------------------------------
SoCCore.__init__(self, platform, irq_n_irqs=16, clk_freq=sys_clk_freq,
ident = "LiteX SoC on Arctic Tern (BMC card carrier)",
**kwargs
)
# DDR3 SDRAM -------------------------------------------------------------------------------
self.ddrphy = ECP5DDRPHY(
platform.request("ddram"),
sys_clk_freq=sys_clk_freq)
self.comb += self.crg.stop.eq(self.ddrphy.init.stop)
self.comb += self.crg.reset.eq(self.ddrphy.init.reset)
self.add_sdram("sdram",
phy = self.ddrphy,
module = MT41J256M16(sys_clk_freq, "1:2"), # Not MT41J256M16, but the AS4C256M16D3C in use has similar specifications
l2_cache_size = kwargs.get("l2_size", 8192),
)
# Ethernet / Etherbone ---------------------------------------------------------------------
if with_ethernet or with_etherbone:
self.ethphy = LiteEthPHYRGMII(
clock_pads = self.platform.request("eth_clocks", 0),
pads = self.platform.request("eth", 0),
tx_delay = 0e-9,
rx_delay = 0e-9)
if with_ethernet:
self.add_ethernet(phy=self.ethphy)
if with_etherbone:
self.add_etherbone(phy=self.ethphy, ip_address=eth_ip)
# Video Output -----------------------------------------------------------------------------
if with_video_colorbars or with_video_terminal or with_video_framebuffer:
dvo_pads = platform.request("dvo")
self.videophy = VideoGenericPHY(dvo_pads, clock_domain="dvo", with_clk_ddr_output=False)
if with_video_terminal:
#self.add_video_terminal(phy=self.videophy, timings="1920x1080@60Hz", clock_domain="dvo")
#self.add_video_terminal(phy=self.videophy, timings="1920x1200@60Hz", clock_domain="dvo")
self.add_video_terminal(phy=self.videophy, timings="800x600@60Hz", clock_domain="dvo")
elif with_video_framebuffer:
#self.add_video_framebuffer(phy=self.videophy, timings="1920x1080@60Hz", clock_domain="dvo")
#self.add_video_framebuffer(phy=self.videophy, timings="1920x1200@60Hz", clock_domain="dvo")
self.add_video_framebuffer(phy=self.videophy, timings="800x600@60Hz", clock_domain="dvo")
else:
self.add_video_colorbars(phy=self.videophy, timings="800x600@60Hz", clock_domain="dvo")
# Build --------------------------------------------------------------------------------------------
def main():
from litex.build.parser import LiteXArgumentParser
parser = LiteXArgumentParser(platform=rcs_arctic_tern_bmc_card.Platform, description="LiteX SoC on Arctic Tern (BMC card carrier).")
parser.add_target_argument("--sys-clk-freq", default=60e6, type=float, help="System clock frequency (default: 60MHz).")
ethopts = parser.target_group.add_mutually_exclusive_group()
ethopts.add_argument("--with-ethernet", action="store_true", help="Enable Ethernet support.")
ethopts.add_argument("--with-etherbone", action="store_true", help="Enable Etherbone support.")
parser.add_target_argument("--eth-ip", default="192.168.1.50", help="Ethernet/Etherbone IP address.")
args = parser.parse_args()
soc = BaseSoC(
toolchain = args.toolchain,
sys_clk_freq = args.sys_clk_freq,
with_ethernet = args.with_ethernet,
with_etherbone = args.with_etherbone,
eth_ip = args.eth_ip,
**parser.soc_argdict)
builder = Builder(soc, **parser.builder_argdict)
if args.build:
builder.build(**parser.toolchain_argdict)
if args.load:
prog = soc.platform.create_programmer()
prog.load_bitstream(builder.get_bitstream_filename(mode="sram", ext=".svf")) # FIXME
if __name__ == "__main__":
main()