litex-boards/litex_boards/targets/terasic_deca.py

156 lines
7.3 KiB
Python
Executable File

#!/usr/bin/env python3
#
# This file is part of LiteX-Boards.
#
# Copyright (c) 2019 msloniewski <marcin.sloniewski@gmail.com>
# SPDX-License-Identifier: BSD-2-Clause
# Build/Use:
# ./terasic_deca.py --uart-name jtag_uart --build --load
# litex_term --jtag-config ../prog/openocd_max10_blaster2.cfg jtag
from migen import *
from litex_boards.platforms import terasic_deca
from litex.soc.cores.clock import Max10PLL
from litex.soc.integration.soc_core import *
from litex.soc.integration.builder import *
from litex.soc.cores.video import VideoDVIPHY
from litex.soc.cores.led import LedChaser
from liteeth.phy.mii import LiteEthPHYMII
# CRG ----------------------------------------------------------------------------------------------
class _CRG(Module):
def __init__(self, platform, sys_clk_freq, with_usb_pll=False):
self.rst = Signal()
self.clock_domains.cd_sys = ClockDomain()
self.clock_domains.cd_hdmi = ClockDomain()
self.clock_domains.cd_usb = ClockDomain()
# # #
# Clk / Rst.
clk50 = platform.request("clk50")
# PLL
self.submodules.pll = pll = Max10PLL(speedgrade="-6")
self.comb += pll.reset.eq(self.rst)
pll.register_clkin(clk50, 50e6)
pll.create_clkout(self.cd_sys, sys_clk_freq)
pll.create_clkout(self.cd_hdmi, 40e6)
# USB PLL.
if with_usb_pll:
ulpi = platform.request("ulpi")
self.comb += ulpi.cs.eq(1) # Enable ULPI chip to enable the ULPI clock.
self.submodules.usb_pll = pll = Max10PLL(speedgrade="-6")
self.comb += pll.reset.eq(self.rst)
pll.register_clkin(ulpi.clk, 60e6)
pll.create_clkout(self.cd_usb, 60e6, phase=-120) # -120° from DECA's example (also validated with LUNA).
# BaseSoC ------------------------------------------------------------------------------------------
class BaseSoC(SoCCore):
def __init__(self, sys_clk_freq=int(50e6), with_led_chaser=True, with_uartbone=False, with_jtagbone=False, with_video_terminal=False,
with_ethernet=False, with_etherbone=False, eth_ip="192.168.1.50",
eth_dynamic_ip=False,
**kwargs):
self.platform = platform = terasic_deca.Platform()
# CRG --------------------------------------------------------------------------------------
self.submodules.crg = self.crg = _CRG(platform, sys_clk_freq, with_usb_pll=False)
# SoCCore ----------------------------------------------------------------------------------
# Defaults to JTAG-UART since no hardware UART.
real_uart_name = kwargs["uart_name"]
if real_uart_name == "serial":
if with_jtagbone:
kwargs["uart_name"] = "crossover"
else:
kwargs["uart_name"] = "jtag_uart"
if with_uartbone:
kwargs["uart_name"] = "crossover"
SoCCore.__init__(self, platform, sys_clk_freq, ident="LiteX SoC on Terasic DECA", **kwargs)
# UARTbone ---------------------------------------------------------------------------------
if with_uartbone:
self.add_uartbone(name=real_uart_name, baudrate=kwargs["uart_baudrate"])
# JTAGbone ---------------------------------------------------------------------------------
if with_jtagbone:
self.add_jtagbone()
# Ethernet ---------------------------------------------------------------------------------
if with_ethernet or with_etherbone:
self.platform.toolchain.additional_sdc_commands += [
'create_clock -name eth_rx_clk -period 40.0 [get_ports {eth_clocks_rx}]',
'create_clock -name eth_tx_clk -period 40.0 [get_ports {eth_clocks_tx}]',
'set_false_path -from [get_clocks {sys_clk}] -to [get_clocks {eth_rx_clk}]',
'set_false_path -from [get_clocks {sys_clk}] -to [get_clocks {eth_tx_clk}]',
'set_false_path -from [get_clocks {eth_rx_clk}] -to [get_clocks {eth_tx_clk}]',
]
self.submodules.ethphy = LiteEthPHYMII(
clock_pads = self.platform.request("eth_clocks"),
pads = self.platform.request("eth"))
if with_ethernet:
self.add_ethernet(phy=self.ethphy, dynamic_ip=eth_dynamic_ip)
if with_etherbone:
self.add_etherbone(phy=self.ethphy, ip_address=eth_ip)
# Video ------------------------------------------------------------------------------------
if with_video_terminal:
self.submodules.videophy = VideoDVIPHY(platform.request("hdmi"), clock_domain="hdmi")
self.add_video_terminal(phy=self.videophy, timings="800x600@60Hz", clock_domain="hdmi")
# Leds -------------------------------------------------------------------------------------
if with_led_chaser:
self.submodules.leds = LedChaser(
pads = platform.request_all("user_led"),
sys_clk_freq = sys_clk_freq)
# Build --------------------------------------------------------------------------------------------
def main():
from litex.soc.integration.soc import LiteXSoCArgumentParser
parser = LiteXSoCArgumentParser(description="LiteX SoC on DECA")
target_group = parser.add_argument_group(title="Target options")
target_group.add_argument("--build", action="store_true", help="Build design.")
target_group.add_argument("--load", action="store_true", help="Load bitstream.")
target_group.add_argument("--sys-clk-freq", default=50e6, help="System clock frequency.")
ethopts = target_group.add_mutually_exclusive_group()
ethopts.add_argument("--with-ethernet", action="store_true", help="Enable Ethernet support.")
ethopts.add_argument("--with-etherbone", action="store_true", help="Enable Etherbone support.")
target_group.add_argument("--eth-ip", default="192.168.1.50", type=str, help="Ethernet/Etherbone IP address.")
target_group.add_argument("--eth-dynamic-ip", action="store_true", help="Enable dynamic Ethernet IP addresses setting.")
target_group.add_argument("--with-uartbone", action="store_true", help="Enable UARTbone support.")
target_group.add_argument("--with-jtagbone", action="store_true", help="Enable JTAGbone support.")
target_group.add_argument("--with-video-terminal", action="store_true", help="Enable Video Terminal (VGA).")
builder_args(parser)
soc_core_args(parser)
args = parser.parse_args()
soc = BaseSoC(
sys_clk_freq = int(float(args.sys_clk_freq)),
with_ethernet = args.with_ethernet,
with_etherbone = args.with_etherbone,
eth_ip = args.eth_ip,
eth_dynamic_ip = args.eth_dynamic_ip,
with_uartbone = args.with_uartbone,
with_jtagbone = args.with_jtagbone,
with_video_terminal = args.with_video_terminal,
**soc_core_argdict(args)
)
builder = Builder(soc, **builder_argdict(args))
if args.build:
builder.build()
if args.load:
prog = soc.platform.create_programmer()
prog.load_bitstream(builder.get_bitstream_filename(mode="sram"))
if __name__ == "__main__":
main()