litex-boards/litex_boards/platforms/radiona_ulx4m_ld_v2.py

177 lines
6.5 KiB
Python

#
# This file is part of LiteX-Boards.
#
# Copyright (c) 2022 Goran Mahovlic <goran.mahovlic@gmail.com>
# Copyright (c) 2020 Greg Davill <greg.davill@gmail.com>
# SPDX-License-Identifier: BSD-2-Clause
from litex.build.generic_platform import *
from litex.build.lattice import LatticeECP5Platform
#from litex.build.dfu import DFUProg
# IOs ----------------------------------------------------------------------------------------------
_io_r0_1 = [
# Clk/Rst.
("clk25", 0, Pins("G2"), IOStandard("LVCMOS33")),
("rst_n", 0, Pins("F1"), IOStandard("LVCMOS33")),
# RGB Led.
("rgb_led", 0,
Subsignal("r", Pins("A3"), IOStandard("LVCMOS33")),
Subsignal("g", Pins("B3"), IOStandard("LVCMOS33")),
Subsignal("b", Pins("B2"), IOStandard("LVCMOS33")),
),
# Buttons.
("user_btn", 0, Pins("E1"), IOStandard("LVCMOS33")),
# Leds.
("user_led", 0, Pins("A3"), IOStandard("LVCMOS33")),
("user_led", 1, Pins("B3"), IOStandard("LVCMOS33")),
("user_led", 2, Pins("B2"), IOStandard("LVCMOS33")),
("user_led", 3, Pins("C3"), IOStandard("LVCMOS33")),
("user_led", 4, Pins("C2"), IOStandard("LVCMOS33")),
("user_led", 5, Pins("C1"), IOStandard("LVCMOS33")),
("user_led", 6, Pins("D1"), IOStandard("LVCMOS33")),
("user_led", 7, Pins("D3"), IOStandard("LVCMOS33")),
# DDR3 SDRAM.
("ddram", 0,
Subsignal("a", Pins(
"F18 L17 D19 E18 H16 T20 U17 T17",
"E16 U19 J17 J16 P17 U20 N20 P18"),
IOStandard("SSTL135_I")),
Subsignal("ba", Pins("P19 G16 P20"), IOStandard("SSTL135_I")),
Subsignal("ras_n", Pins("R20"), IOStandard("SSTL135_I")),
Subsignal("cas_n", Pins("F20"), IOStandard("SSTL135_I")),
Subsignal("we_n", Pins("H17"), IOStandard("SSTL135_I")),
Subsignal("cs_n", Pins("H18"), IOStandard("SSTL135_I")),
Subsignal("dm", Pins("F16 U16"), IOStandard("SSTL135_I")),
Subsignal("dq", Pins(
"R17 L19 R16 L16 M18 M19 N18 N17",
"J19 C20 F19 E20 J18 K19 E19 G20"),
IOStandard("SSTL135_I"),
Misc("TERMINATION=75")), # Disable to reduce heat.
Subsignal("dqs_p", Pins("N16 G19"), IOStandard("SSTL135D_I"),
Misc("TERMINATION=OFF DIFFRESISTOR=100")),
Subsignal("clk_p", Pins("L20"), IOStandard("SSTL135D_I")),
Subsignal("cke", Pins("N19"), IOStandard("SSTL135_I")),
Subsignal("odt", Pins("T19"), IOStandard("SSTL135_I")),
Subsignal("reset_n", Pins("T18"), IOStandard("SSTL135_I")),
Misc("SLEWRATE=FAST")
),
# USB.
("usb", 0,
Subsignal("d_p", Pins("F4")),
Subsignal("d_n", Pins("E3")),
Subsignal("pullup", Pins("F5")),
IOStandard("LVCMOS33")
),
# Serial.
("serial", 0,
Subsignal("rx", Pins("N4"), Misc("PULLMODE=UP"), IOStandard("LVCMOS33")),
Subsignal("tx", Pins("N3"), Misc("PULLMODE=NONE"), IOStandard("LVCMOS33")),
Subsignal("tx_enable", Pins("T1"), Misc("PULLMODE=UP")),
IOStandard("LVCMOS33")
),
# SPIFlash.
("spiflash", 0,
Subsignal("cs_n", Pins("R2")),
Subsignal("miso", Pins("V2")),
Subsignal("mosi", Pins("W2")),
Subsignal("wp", Pins("Y2")),
Subsignal("hold", Pins("W1")),
IOStandard("LVCMOS33")
),
("spiflash4x", 0,
Subsignal("cs_n", Pins("R2")),
Subsignal("dq", Pins("W2", "V2", "Y2", "W1")),
IOStandard("LVCMOS33")
),
# SDCard.
("sdcard", 0,
Subsignal("clk", Pins("G1")),
Subsignal("cmd", Pins("P1"), Misc("PULLMODE=UP")),
Subsignal("data", Pins("B15 B18 E14 P2"), Misc("PULLMODE=UP")),
IOStandard("LVCMOS33"), Misc("SLEW=FAST")
),
# GPDI
("gpdi", 0,
Subsignal("clk_p", Pins("J20"), IOStandard("SSTL135D_I"), Misc("DRIVE=4")),
#Subsignal("clk_n", Pins("B18"), IOStandard("LVCMOS33D"), Misc("DRIVE=4")),
Subsignal("data0_p", Pins("F17"), IOStandard("SSTL135D_I"), Misc("DRIVE=4")),
#Subsignal("data0_n", Pins("A13"), IOStandard("LVCMOS33D"), Misc("DRIVE=4")),
Subsignal("data1_p", Pins("D18"), IOStandard("SSTL135D_I"), Misc("DRIVE=4")),
#Subsignal("data1_n", Pins("C14"), IOStandard("LVCMOS33D"), Misc("DRIVE=4")),
Subsignal("data2_p", Pins("C18"), IOStandard("SSTL135D_I"), Misc("DRIVE=4")),
#Subsignal("data2_n", Pins("B16"), IOStandard("LVCMOS33D"), Misc("DRIVE=4")),
#Subsignal("cec", Pins("A18"), IOStandard("LVCMOS33"), Misc("PULLMODE=UP")),
#Subsignal("scl", Pins("E19"), IOStandard("LVCMOS33"), Misc("PULLMODE=UP")),
#Subsignal("sda", Pins("B19"), IOStandard("LVCMOS33"), Misc("PULLMODE=UP"))
),
]
# Connectors ---------------------------------------------------------------------------------------
_connectors_r0_1 = [
# Feather 0.1" Header Pin Numbers,
# Note: Pin nubering is not continuous.
("GPIO", "P16 P17"),
]
_connectors_r0_2 = [
# Feather 0.1" Header Pin Numbers,
# Note: Pin nubering is not continuous.
("GPIO", "P16 P17 K5 J5 - K4 H16 - - R1 P3 P4 G16 N17 L16 C4 T1 - - - - - - - -"),
]
# Standard Feather Pins
feather_serial = [
("serial", 0,
Subsignal("tx", Pins("GPIO:1"), IOStandard("LVCMOS33")),
Subsignal("rx", Pins("GPIO:0"), IOStandard("LVCMOS33"))
)
]
feather_i2c = [
("i2c", 0,
Subsignal("sda", Pins("GPIO:2"), IOStandard("LVCMOS33")),
Subsignal("scl", Pins("GPIO:3"), IOStandard("LVCMOS33"))
)
]
feather_spi = [
("spi",0,
Subsignal("miso", Pins("GPIO:14"), IOStandard("LVCMOS33")),
Subsignal("mosi", Pins("GPIO:16"), IOStandard("LVCMOS33")),
Subsignal("sck", Pins("GPIO:15"), IOStandard("LVCMOS33"))
)
]
# Platform -----------------------------------------------------------------------------------------
class Platform(LatticeECP5Platform):
default_clk_name = "clk25"
default_clk_period = 1e9/25e6
def __init__(self, revision="0.1", device="85F", **kwargs):
assert revision in ["0.1"]
self.revision = revision
io = {"0.1": _io_r0_1}[revision]
connectors = {"0.1": _connectors_r0_1}[revision]
LatticeECP5Platform.__init__(self, f"LFE5UM5G-{device}-8BG381C", io, connectors, **kwargs)
# def create_programmer(self):
# return DFUProg(vid="1209", pid="5af0")
def do_finalize(self, fragment):
LatticeECP5Platform.do_finalize(self, fragment)
self.add_period_constraint(self.lookup_request("clk25", loose=True), 1e9/25e6)