Hardware
/
litex
mirror of https://github.com/enjoy-digital/litex.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
litex/verilog/lm32/lm32_load_store_unit.v

830 lines
32 KiB
Coq
Raw Normal View History

Initial import
2011-12-13 11:33:12 -05:00
// ==================================================================
// >>>>>>>>>>>>>>>>>>>>>>> COPYRIGHT NOTICE <<<<<<<<<<<<<<<<<<<<<<<<<
// ------------------------------------------------------------------
// Copyright (c) 2006-2011 by Lattice Semiconductor Corporation
// ALL RIGHTS RESERVED
// ------------------------------------------------------------------
//
// IMPORTANT: THIS FILE IS AUTO-GENERATED BY THE LATTICEMICO SYSTEM.
//
// Permission:
//
// Lattice Semiconductor grants permission to use this code
// pursuant to the terms of the Lattice Semiconductor Corporation
// Open Source License Agreement.
//
// Disclaimer:
//
// Lattice Semiconductor provides no warranty regarding the use or
// functionality of this code. It is the user's responsibility to
// verify the user's design for consistency and functionality through
// the use of formal verification methods.
//
// --------------------------------------------------------------------
//
// Lattice Semiconductor Corporation
// 5555 NE Moore Court
// Hillsboro, OR 97214
// U.S.A
//
// TEL: 1-800-Lattice (USA and Canada)
// 503-286-8001 (other locations)
//
// web: http://www.latticesemi.com/
// email: techsupport@latticesemi.com
//
// --------------------------------------------------------------------
// FILE DETAILS
// Project : LatticeMico32
// File : lm32_load_store_unit.v
// Title : Load and store unit
// Dependencies : lm32_include.v
// Version : 6.1.17
// : Initial Release
// Version : 7.0SP2, 3.0
// : No Change
// Version : 3.1
// : Instead of disallowing an instruction cache miss on a data cache
// : miss, both can now occur at the same time. If both occur at same
// : time, then restart address is the address of instruction that
// : caused data cache miss.
// Version : 3.2
// : EBRs use SYNC resets instead of ASYNC resets.
// Version : 3.3
// : Support for new non-cacheable Data Memory that is accessible by
// : the data port and has a one cycle access latency.
// Version : 3.4
// : No change
// Version : 3.5
// : Bug fix: Inline memory is correctly generated if it is not a
// : power-of-two
// =============================================================================
`include "lm32_include.v"
/////////////////////////////////////////////////////
// Module interface
/////////////////////////////////////////////////////
module lm32_load_store_unit (
// ----- Inputs -------
clk_i,
rst_i,
// From pipeline
stall_a,
stall_x,
stall_m,
kill_x,
kill_m,
exception_m,
store_operand_x,
load_store_address_x,
load_store_address_m,
load_store_address_w,
load_x,
store_x,
load_q_x,
store_q_x,
load_q_m,
store_q_m,
sign_extend_x,
size_x,
`ifdef CFG_DCACHE_ENABLED
dflush,
`endif
`ifdef CFG_IROM_ENABLED
irom_data_m,
`endif
// From Wishbone
d_dat_i,
d_ack_i,
d_err_i,
d_rty_i,
// ----- Outputs -------
// To pipeline
`ifdef CFG_DCACHE_ENABLED
dcache_refill_request,
dcache_restart_request,
dcache_stall_request,
dcache_refilling,
`endif
`ifdef CFG_IROM_ENABLED
irom_store_data_m,
irom_address_xm,
irom_we_xm,
irom_stall_request_x,
`endif
load_data_w,
stall_wb_load,
// To Wishbone
d_dat_o,
d_adr_o,
d_cyc_o,
d_sel_o,
d_stb_o,
d_we_o,
d_cti_o,
d_lock_o,
d_bte_o
);
/////////////////////////////////////////////////////
// Parameters
/////////////////////////////////////////////////////
parameter associativity = 1; // Associativity of the cache (Number of ways)
parameter sets = 512; // Number of sets
parameter bytes_per_line = 16; // Number of bytes per cache line
parameter base_address = 0; // Base address of cachable memory
parameter limit = 0; // Limit (highest address) of cachable memory
// For bytes_per_line == 4, we set 1 so part-select range isn't reversed, even though not really used
localparam addr_offset_width = bytes_per_line == 4 ? 1 : clogb2(bytes_per_line)-1-2;
localparam addr_offset_lsb = 2;
localparam addr_offset_msb = (addr_offset_lsb+addr_offset_width-1);
/////////////////////////////////////////////////////
// Inputs
/////////////////////////////////////////////////////
input clk_i; // Clock
input rst_i; // Reset
input stall_a; // A stage stall
input stall_x; // X stage stall
input stall_m; // M stage stall
input kill_x; // Kill instruction in X stage
input kill_m; // Kill instruction in M stage
input exception_m; // An exception occured in the M stage
input [`LM32_WORD_RNG] store_operand_x; // Data read from register to store
input [`LM32_WORD_RNG] load_store_address_x; // X stage load/store address
input [`LM32_WORD_RNG] load_store_address_m; // M stage load/store address
input [1:0] load_store_address_w; // W stage load/store address (only least two significant bits are needed)
input load_x; // Load instruction in X stage
input store_x; // Store instruction in X stage
input load_q_x; // Load instruction in X stage
input store_q_x; // Store instruction in X stage
input load_q_m; // Load instruction in M stage
input store_q_m; // Store instruction in M stage
input sign_extend_x; // Whether load instruction in X stage should sign extend or zero extend
input [`LM32_SIZE_RNG] size_x; // Size of load or store (byte, hword, word)
`ifdef CFG_DCACHE_ENABLED
input dflush; // Flush the data cache
`endif
`ifdef CFG_IROM_ENABLED
input [`LM32_WORD_RNG] irom_data_m; // Data from Instruction-ROM
`endif
input [`LM32_WORD_RNG] d_dat_i; // Data Wishbone interface read data
input d_ack_i; // Data Wishbone interface acknowledgement
input d_err_i; // Data Wishbone interface error
input d_rty_i; // Data Wishbone interface retry
/////////////////////////////////////////////////////
// Outputs
/////////////////////////////////////////////////////
`ifdef CFG_DCACHE_ENABLED
output dcache_refill_request; // Request to refill data cache
wire dcache_refill_request;
output dcache_restart_request; // Request to restart the instruction that caused a data cache miss
wire dcache_restart_request;
output dcache_stall_request; // Data cache stall request
wire dcache_stall_request;
output dcache_refilling;
wire dcache_refilling;
`endif
`ifdef CFG_IROM_ENABLED
output irom_store_data_m; // Store data to Instruction ROM
wire [`LM32_WORD_RNG] irom_store_data_m;
output [`LM32_WORD_RNG] irom_address_xm; // Load/store address to Instruction ROM
wire [`LM32_WORD_RNG] irom_address_xm;
output irom_we_xm; // Write-enable of 2nd port of Instruction ROM
wire irom_we_xm;
output irom_stall_request_x; // Stall instruction in D stage
wire irom_stall_request_x;
`endif
output [`LM32_WORD_RNG] load_data_w; // Result of a load instruction
reg [`LM32_WORD_RNG] load_data_w;
output stall_wb_load; // Request to stall pipeline due to a load from the Wishbone interface
reg stall_wb_load;
output [`LM32_WORD_RNG] d_dat_o; // Data Wishbone interface write data
reg [`LM32_WORD_RNG] d_dat_o;
output [`LM32_WORD_RNG] d_adr_o; // Data Wishbone interface address
reg [`LM32_WORD_RNG] d_adr_o;
output d_cyc_o; // Data Wishbone interface cycle
reg d_cyc_o;
output [`LM32_BYTE_SELECT_RNG] d_sel_o; // Data Wishbone interface byte select
reg [`LM32_BYTE_SELECT_RNG] d_sel_o;
output d_stb_o; // Data Wishbone interface strobe
reg d_stb_o;
output d_we_o; // Data Wishbone interface write enable
reg d_we_o;
output [`LM32_CTYPE_RNG] d_cti_o; // Data Wishbone interface cycle type
reg [`LM32_CTYPE_RNG] d_cti_o;
output d_lock_o; // Date Wishbone interface lock bus
reg d_lock_o;
output [`LM32_BTYPE_RNG] d_bte_o; // Data Wishbone interface burst type
wire [`LM32_BTYPE_RNG] d_bte_o;
/////////////////////////////////////////////////////
// Internal nets and registers
/////////////////////////////////////////////////////
// Microcode pipeline registers - See inputs for description
reg [`LM32_SIZE_RNG] size_m;
reg [`LM32_SIZE_RNG] size_w;
reg sign_extend_m;
reg sign_extend_w;
reg [`LM32_WORD_RNG] store_data_x;
reg [`LM32_WORD_RNG] store_data_m;
reg [`LM32_BYTE_SELECT_RNG] byte_enable_x;
reg [`LM32_BYTE_SELECT_RNG] byte_enable_m;
wire [`LM32_WORD_RNG] data_m;
reg [`LM32_WORD_RNG] data_w;
`ifdef CFG_DCACHE_ENABLED
wire dcache_select_x; // Select data cache to load from / store to
reg dcache_select_m;
wire [`LM32_WORD_RNG] dcache_data_m; // Data read from cache
wire [`LM32_WORD_RNG] dcache_refill_address; // Address to refill data cache from
reg dcache_refill_ready; // Indicates the next word of refill data is ready
wire [`LM32_CTYPE_RNG] first_cycle_type; // First Wishbone cycle type
wire [`LM32_CTYPE_RNG] next_cycle_type; // Next Wishbone cycle type
wire last_word; // Indicates if this is the last word in the cache line
wire [`LM32_WORD_RNG] first_address; // First cache refill address
`endif
`ifdef CFG_DRAM_ENABLED
wire dram_select_x; // Select data RAM to load from / store to
reg dram_select_m;
reg dram_bypass_en; // RAW in data RAM; read latched (bypass) value rather than value from memory
reg [`LM32_WORD_RNG] dram_bypass_data; // Latched value of store'd data to data RAM
wire [`LM32_WORD_RNG] dram_data_out; // Data read from data RAM
wire [`LM32_WORD_RNG] dram_data_m; // Data read from data RAM: bypass value or value from memory
wire [`LM32_WORD_RNG] dram_store_data_m; // Data to write to RAM
`endif
wire wb_select_x; // Select Wishbone to load from / store to
`ifdef CFG_IROM_ENABLED
wire irom_select_x; // Select instruction ROM to load from / store to
reg irom_select_m;
`endif
reg wb_select_m;
reg [`LM32_WORD_RNG] wb_data_m; // Data read from Wishbone
reg wb_load_complete; // Indicates when a Wishbone load is complete
/////////////////////////////////////////////////////
// Functions
/////////////////////////////////////////////////////
`include "lm32_functions.v"
/////////////////////////////////////////////////////
// Instantiations
/////////////////////////////////////////////////////
`ifdef CFG_DRAM_ENABLED
// Data RAM
pmi_ram_dp_true
#(
// ----- Parameters -------
.pmi_family (`LATTICE_FAMILY),
//.pmi_addr_depth_a (1 << (clogb2(`CFG_DRAM_LIMIT/4-`CFG_DRAM_BASE_ADDRESS/4+1)-1)),
//.pmi_addr_width_a ((clogb2(`CFG_DRAM_LIMIT/4-`CFG_DRAM_BASE_ADDRESS/4+1)-1)),
//.pmi_data_width_a (`LM32_WORD_WIDTH),
//.pmi_addr_depth_b (1 << (clogb2(`CFG_DRAM_LIMIT/4-`CFG_DRAM_BASE_ADDRESS/4+1)-1)),
//.pmi_addr_width_b ((clogb2(`CFG_DRAM_LIMIT/4-`CFG_DRAM_BASE_ADDRESS/4+1)-1)),
//.pmi_data_width_b (`LM32_WORD_WIDTH),
.pmi_addr_depth_a (`CFG_DRAM_LIMIT/4-`CFG_DRAM_BASE_ADDRESS/4+1),
.pmi_addr_width_a (clogb2_v1(`CFG_DRAM_LIMIT/4-`CFG_DRAM_BASE_ADDRESS/4+1)),
.pmi_data_width_a (`LM32_WORD_WIDTH),
.pmi_addr_depth_b (`CFG_DRAM_LIMIT/4-`CFG_DRAM_BASE_ADDRESS/4+1),
.pmi_addr_width_b (clogb2_v1(`CFG_DRAM_LIMIT/4-`CFG_DRAM_BASE_ADDRESS/4+1)),
.pmi_data_width_b (`LM32_WORD_WIDTH),
.pmi_regmode_a ("noreg"),
.pmi_regmode_b ("noreg"),
.pmi_gsr ("enable"),
.pmi_resetmode ("sync"),
.pmi_init_file (`CFG_DRAM_INIT_FILE),
.pmi_init_file_format (`CFG_DRAM_INIT_FILE_FORMAT),
.module_type ("pmi_ram_dp_true")
)
ram (
// ----- Inputs -------
.ClockA (clk_i),
.ClockB (clk_i),
.ResetA (rst_i),
.ResetB (rst_i),
.DataInA ({32{1'b0}}),
.DataInB (dram_store_data_m),
.AddressA (load_store_address_x[(clogb2(`CFG_DRAM_LIMIT/4-`CFG_DRAM_BASE_ADDRESS/4+1)-1)+2-1:2]),
.AddressB (load_store_address_m[(clogb2(`CFG_DRAM_LIMIT/4-`CFG_DRAM_BASE_ADDRESS/4+1)-1)+2-1:2]),
// .ClockEnA (!stall_x & (load_x | store_x)),
.ClockEnA (!stall_x),
.ClockEnB (!stall_m),
.WrA (`FALSE),
.WrB (store_q_m & dram_select_m),
// ----- Outputs -------
.QA (dram_data_out),
.QB ()
);
/*----------------------------------------------------------------------
EBRs cannot perform reads from location 'written to' on the same clock
edge. Therefore bypass logic is required to latch the store'd value
and use it for the load (instead of value from memory).
----------------------------------------------------------------------*/
always @(posedge clk_i `CFG_RESET_SENSITIVITY)
if (rst_i == `TRUE)
begin
dram_bypass_en <= `FALSE;
dram_bypass_data <= 0;
end
else
begin
if (stall_x == `FALSE)
dram_bypass_data <= dram_store_data_m;
if ( (stall_m == `FALSE)
&& (stall_x == `FALSE)
&& (store_q_m == `TRUE)
&& ( (load_x == `TRUE)
|| (store_x == `TRUE)
)
&& (load_store_address_x[(`LM32_WORD_WIDTH-1):2] == load_store_address_m[(`LM32_WORD_WIDTH-1):2])
)
dram_bypass_en <= `TRUE;
else
if ( (dram_bypass_en == `TRUE)
&& (stall_x == `FALSE)
)
dram_bypass_en <= `FALSE;
end
assign dram_data_m = dram_bypass_en ? dram_bypass_data : dram_data_out;
`endif
`ifdef CFG_DCACHE_ENABLED
// Data cache
lm32_dcache #(
.associativity (associativity),
.sets (sets),
.bytes_per_line (bytes_per_line),
.base_address (base_address),
.limit (limit)
) dcache (
// ----- Inputs -----
.clk_i (clk_i),
.rst_i (rst_i),
.stall_a (stall_a),
.stall_x (stall_x),
.stall_m (stall_m),
.address_x (load_store_address_x),
.address_m (load_store_address_m),
.load_q_m (load_q_m & dcache_select_m),
.store_q_m (store_q_m & dcache_select_m),
.store_data (store_data_m),
.store_byte_select (byte_enable_m & {4{dcache_select_m}}),
.refill_ready (dcache_refill_ready),
.refill_data (wb_data_m),
.dflush (dflush),
// ----- Outputs -----
.stall_request (dcache_stall_request),
.restart_request (dcache_restart_request),
.refill_request (dcache_refill_request),
.refill_address (dcache_refill_address),
.refilling (dcache_refilling),
.load_data (dcache_data_m)
);
`endif
/////////////////////////////////////////////////////
// Combinational Logic
/////////////////////////////////////////////////////
// Select where data should be loaded from / stored to
`ifdef CFG_DRAM_ENABLED
assign dram_select_x = (load_store_address_x >= `CFG_DRAM_BASE_ADDRESS)
&& (load_store_address_x <= `CFG_DRAM_LIMIT);
`endif
`ifdef CFG_IROM_ENABLED
assign irom_select_x = (load_store_address_x >= `CFG_IROM_BASE_ADDRESS)
&& (load_store_address_x <= `CFG_IROM_LIMIT);
`endif
`ifdef CFG_DCACHE_ENABLED
assign dcache_select_x = (load_store_address_x >= `CFG_DCACHE_BASE_ADDRESS)
&& (load_store_address_x <= `CFG_DCACHE_LIMIT)
`ifdef CFG_DRAM_ENABLED
&& (dram_select_x == `FALSE)
`endif
`ifdef CFG_IROM_ENABLED
&& (irom_select_x == `FALSE)
`endif
;
`endif
assign wb_select_x = `TRUE
`ifdef CFG_DCACHE_ENABLED
&& !dcache_select_x
`endif
`ifdef CFG_DRAM_ENABLED
&& !dram_select_x
`endif
`ifdef CFG_IROM_ENABLED
&& !irom_select_x
`endif
;
// Make sure data to store is in correct byte lane
always @(*)
begin
case (size_x)
`LM32_SIZE_BYTE: store_data_x = {4{store_operand_x[7:0]}};
`LM32_SIZE_HWORD: store_data_x = {2{store_operand_x[15:0]}};
`LM32_SIZE_WORD: store_data_x = store_operand_x;
default: store_data_x = {`LM32_WORD_WIDTH{1'bx}};
endcase
end
// Generate byte enable accoring to size of load or store and address being accessed
always @(*)
begin
casez ({size_x, load_store_address_x[1:0]})
{`LM32_SIZE_BYTE, 2'b11}: byte_enable_x = 4'b0001;
{`LM32_SIZE_BYTE, 2'b10}: byte_enable_x = 4'b0010;
{`LM32_SIZE_BYTE, 2'b01}: byte_enable_x = 4'b0100;
{`LM32_SIZE_BYTE, 2'b00}: byte_enable_x = 4'b1000;
{`LM32_SIZE_HWORD, 2'b1?}: byte_enable_x = 4'b0011;
{`LM32_SIZE_HWORD, 2'b0?}: byte_enable_x = 4'b1100;
{`LM32_SIZE_WORD, 2'b??}: byte_enable_x = 4'b1111;
default: byte_enable_x = 4'bxxxx;
endcase
end
`ifdef CFG_DRAM_ENABLED
// Only replace selected bytes
assign dram_store_data_m[`LM32_BYTE_0_RNG] = byte_enable_m[0] ? store_data_m[`LM32_BYTE_0_RNG] : dram_data_m[`LM32_BYTE_0_RNG];
assign dram_store_data_m[`LM32_BYTE_1_RNG] = byte_enable_m[1] ? store_data_m[`LM32_BYTE_1_RNG] : dram_data_m[`LM32_BYTE_1_RNG];
assign dram_store_data_m[`LM32_BYTE_2_RNG] = byte_enable_m[2] ? store_data_m[`LM32_BYTE_2_RNG] : dram_data_m[`LM32_BYTE_2_RNG];
assign dram_store_data_m[`LM32_BYTE_3_RNG] = byte_enable_m[3] ? store_data_m[`LM32_BYTE_3_RNG] : dram_data_m[`LM32_BYTE_3_RNG];
`endif
`ifdef CFG_IROM_ENABLED
// Only replace selected bytes
assign irom_store_data_m[`LM32_BYTE_0_RNG] = byte_enable_m[0] ? store_data_m[`LM32_BYTE_0_RNG] : irom_data_m[`LM32_BYTE_0_RNG];
assign irom_store_data_m[`LM32_BYTE_1_RNG] = byte_enable_m[1] ? store_data_m[`LM32_BYTE_1_RNG] : irom_data_m[`LM32_BYTE_1_RNG];
assign irom_store_data_m[`LM32_BYTE_2_RNG] = byte_enable_m[2] ? store_data_m[`LM32_BYTE_2_RNG] : irom_data_m[`LM32_BYTE_2_RNG];
assign irom_store_data_m[`LM32_BYTE_3_RNG] = byte_enable_m[3] ? store_data_m[`LM32_BYTE_3_RNG] : irom_data_m[`LM32_BYTE_3_RNG];
`endif
`ifdef CFG_IROM_ENABLED
// Instead of implementing a byte-addressable instruction ROM (for store byte instruction),
// a load-and-store architecture is used wherein a 32-bit value is loaded, the requisite
// byte is replaced, and the whole 32-bit value is written back
assign irom_address_xm = ((irom_select_m == `TRUE) && (store_q_m == `TRUE))
? load_store_address_m
: load_store_address_x;
// All store instructions perform a write operation in the M stage
assign irom_we_xm = (irom_select_m == `TRUE)
&& (store_q_m == `TRUE);
// A single port in instruction ROM is available to load-store unit for doing loads/stores.
// Since every store requires a load (in X stage) and then a store (in M stage), we cannot
// allow load (or store) instructions sequentially after the store instructions to proceed
// until the store instruction has vacated M stage (i.e., completed the store operation)
assign irom_stall_request_x = (irom_select_x == `TRUE)
&& (store_q_x == `TRUE);
`endif
`ifdef CFG_DCACHE_ENABLED
`ifdef CFG_DRAM_ENABLED
`ifdef CFG_IROM_ENABLED
// WB + DC + DRAM + IROM
assign data_m = wb_select_m == `TRUE
? wb_data_m
: dram_select_m == `TRUE
? dram_data_m
: irom_select_m == `TRUE
? irom_data_m
: dcache_data_m;
`else
// WB + DC + DRAM
assign data_m = wb_select_m == `TRUE
? wb_data_m
: dram_select_m == `TRUE
? dram_data_m
: dcache_data_m;
`endif
`else
`ifdef CFG_IROM_ENABLED
// WB + DC + IROM
assign data_m = wb_select_m == `TRUE
? wb_data_m
: irom_select_m == `TRUE
? irom_data_m
: dcache_data_m;
`else
// WB + DC
assign data_m = wb_select_m == `TRUE
? wb_data_m
: dcache_data_m;
`endif
`endif
`else
`ifdef CFG_DRAM_ENABLED
`ifdef CFG_IROM_ENABLED
// WB + DRAM + IROM
assign data_m = wb_select_m == `TRUE
? wb_data_m
: dram_select_m == `TRUE
? dram_data_m
: irom_data_m;
`else
// WB + DRAM
assign data_m = wb_select_m == `TRUE
? wb_data_m
: dram_data_m;
`endif
`else
`ifdef CFG_IROM_ENABLED
// WB + IROM
assign data_m = wb_select_m == `TRUE
? wb_data_m
: irom_data_m;
`else
// WB
assign data_m = wb_data_m;
`endif
`endif
`endif
// Sub-word selection and sign/zero-extension for loads
always @(*)
begin
casez ({size_w, load_store_address_w[1:0]})
{`LM32_SIZE_BYTE, 2'b11}: load_data_w = {{24{sign_extend_w & data_w[7]}}, data_w[7:0]};
{`LM32_SIZE_BYTE, 2'b10}: load_data_w = {{24{sign_extend_w & data_w[15]}}, data_w[15:8]};
{`LM32_SIZE_BYTE, 2'b01}: load_data_w = {{24{sign_extend_w & data_w[23]}}, data_w[23:16]};
{`LM32_SIZE_BYTE, 2'b00}: load_data_w = {{24{sign_extend_w & data_w[31]}}, data_w[31:24]};
{`LM32_SIZE_HWORD, 2'b1?}: load_data_w = {{16{sign_extend_w & data_w[15]}}, data_w[15:0]};
{`LM32_SIZE_HWORD, 2'b0?}: load_data_w = {{16{sign_extend_w & data_w[31]}}, data_w[31:16]};
{`LM32_SIZE_WORD, 2'b??}: load_data_w = data_w;
default: load_data_w = {`LM32_WORD_WIDTH{1'bx}};
endcase
end
// Unused/constant Wishbone signals
assign d_bte_o = `LM32_BTYPE_LINEAR;
`ifdef CFG_DCACHE_ENABLED
// Generate signal to indicate last word in cache line
generate
case (bytes_per_line)
4:
begin
assign first_cycle_type = `LM32_CTYPE_END;
assign next_cycle_type = `LM32_CTYPE_END;
assign last_word = `TRUE;
assign first_address = {dcache_refill_address[`LM32_WORD_WIDTH-1:2], 2'b00};
end
8:
begin
assign first_cycle_type = `LM32_CTYPE_INCREMENTING;
assign next_cycle_type = `LM32_CTYPE_END;
assign last_word = (&d_adr_o[addr_offset_msb:addr_offset_lsb]) == 1'b1;
assign first_address = {dcache_refill_address[`LM32_WORD_WIDTH-1:addr_offset_msb+1], {addr_offset_width{1'b0}}, 2'b00};
end
16:
begin
assign first_cycle_type = `LM32_CTYPE_INCREMENTING;
assign next_cycle_type = d_adr_o[addr_offset_msb] == 1'b1 ? `LM32_CTYPE_END : `LM32_CTYPE_INCREMENTING;
assign last_word = (&d_adr_o[addr_offset_msb:addr_offset_lsb]) == 1'b1;
assign first_address = {dcache_refill_address[`LM32_WORD_WIDTH-1:addr_offset_msb+1], {addr_offset_width{1'b0}}, 2'b00};
end
endcase
endgenerate
`endif
/////////////////////////////////////////////////////
// Sequential Logic
/////////////////////////////////////////////////////
// Data Wishbone interface
always @(posedge clk_i `CFG_RESET_SENSITIVITY)
begin
if (rst_i == `TRUE)
begin
d_cyc_o <= `FALSE;
d_stb_o <= `FALSE;
d_dat_o <= {`LM32_WORD_WIDTH{1'b0}};
d_adr_o <= {`LM32_WORD_WIDTH{1'b0}};
d_sel_o <= {`LM32_BYTE_SELECT_WIDTH{`FALSE}};
d_we_o <= `FALSE;
d_cti_o <= `LM32_CTYPE_END;
d_lock_o <= `FALSE;
wb_data_m <= {`LM32_WORD_WIDTH{1'b0}};
wb_load_complete <= `FALSE;
stall_wb_load <= `FALSE;
`ifdef CFG_DCACHE_ENABLED
dcache_refill_ready <= `FALSE;
`endif
end
else
begin
`ifdef CFG_DCACHE_ENABLED
// Refill ready should only be asserted for a single cycle
dcache_refill_ready <= `FALSE;
`endif
// Is a Wishbone cycle already in progress?
if (d_cyc_o == `TRUE)
begin
// Is the cycle complete?
if ((d_ack_i == `TRUE) || (d_err_i == `TRUE))
begin
`ifdef CFG_DCACHE_ENABLED
if ((dcache_refilling == `TRUE) && (!last_word))
begin
// Fetch next word of cache line
d_adr_o[addr_offset_msb:addr_offset_lsb] <= d_adr_o[addr_offset_msb:addr_offset_lsb] + 1'b1;
end
else
`endif
begin
// Refill/access complete
d_cyc_o <= `FALSE;
d_stb_o <= `FALSE;
d_lock_o <= `FALSE;
end
`ifdef CFG_DCACHE_ENABLED
d_cti_o <= next_cycle_type;
// If we are performing a refill, indicate to cache next word of data is ready
dcache_refill_ready <= dcache_refilling;
`endif
// Register data read from Wishbone interface
wb_data_m <= d_dat_i;
// Don't set when stores complete - otherwise we'll deadlock if load in m stage
wb_load_complete <= !d_we_o;
end
// synthesis translate_off
if (d_err_i == `TRUE)
$display ("Data bus error. Address: %x", d_adr_o);
// synthesis translate_on
end
else
begin
`ifdef CFG_DCACHE_ENABLED
if (dcache_refill_request == `TRUE)
begin
// Start cache refill
d_adr_o <= first_address;
d_cyc_o <= `TRUE;
d_sel_o <= {`LM32_WORD_WIDTH/8{`TRUE}};
d_stb_o <= `TRUE;
d_we_o <= `FALSE;
d_cti_o <= first_cycle_type;
//d_lock_o <= `TRUE;
end
else
`endif
if ( (store_q_m == `TRUE)
&& (stall_m == `FALSE)
`ifdef CFG_DRAM_ENABLED
&& (dram_select_m == `FALSE)
`endif
`ifdef CFG_IROM_ENABLED
&& (irom_select_m == `FALSE)
`endif
)
begin
// Data cache is write through, so all stores go to memory
d_dat_o <= store_data_m;
d_adr_o <= load_store_address_m;
d_cyc_o <= `TRUE;
d_sel_o <= byte_enable_m;
d_stb_o <= `TRUE;
d_we_o <= `TRUE;
d_cti_o <= `LM32_CTYPE_END;
end
else if ( (load_q_m == `TRUE)
&& (wb_select_m == `TRUE)
&& (wb_load_complete == `FALSE)
// stall_m will be TRUE, because stall_wb_load will be TRUE
)
begin
// Read requested address
stall_wb_load <= `FALSE;
d_adr_o <= load_store_address_m;
d_cyc_o <= `TRUE;
d_sel_o <= byte_enable_m;
d_stb_o <= `TRUE;
d_we_o <= `FALSE;
d_cti_o <= `LM32_CTYPE_END;
end
end
// Clear load/store complete flag when instruction leaves M stage
if (stall_m == `FALSE)
wb_load_complete <= `FALSE;
// When a Wishbone load first enters the M stage, we need to stall it
if ((load_q_x == `TRUE) && (wb_select_x == `TRUE) && (stall_x == `FALSE))
stall_wb_load <= `TRUE;
// Clear stall request if load instruction is killed
if ((kill_m == `TRUE) || (exception_m == `TRUE))
stall_wb_load <= `FALSE;
end
end
// Pipeline registers
// X/M stage pipeline registers
always @(posedge clk_i `CFG_RESET_SENSITIVITY)
begin
if (rst_i == `TRUE)
begin
sign_extend_m <= `FALSE;
size_m <= 2'b00;
byte_enable_m <= `FALSE;
store_data_m <= {`LM32_WORD_WIDTH{1'b0}};
`ifdef CFG_DCACHE_ENABLED
dcache_select_m <= `FALSE;
`endif
`ifdef CFG_DRAM_ENABLED
dram_select_m <= `FALSE;
`endif
`ifdef CFG_IROM_ENABLED
irom_select_m <= `FALSE;
`endif
wb_select_m <= `FALSE;
end
else
begin
if (stall_m == `FALSE)
begin
sign_extend_m <= sign_extend_x;
size_m <= size_x;
byte_enable_m <= byte_enable_x;
store_data_m <= store_data_x;
`ifdef CFG_DCACHE_ENABLED
dcache_select_m <= dcache_select_x;
`endif
`ifdef CFG_DRAM_ENABLED
dram_select_m <= dram_select_x;
`endif
`ifdef CFG_IROM_ENABLED
irom_select_m <= irom_select_x;
`endif
wb_select_m <= wb_select_x;
end
end
end
// M/W stage pipeline registers
always @(posedge clk_i `CFG_RESET_SENSITIVITY)
begin
if (rst_i == `TRUE)
begin
size_w <= 2'b00;
data_w <= {`LM32_WORD_WIDTH{1'b0}};
sign_extend_w <= `FALSE;
end
else
begin
size_w <= size_m;
data_w <= data_m;
sign_extend_w <= sign_extend_m;
end
end
/////////////////////////////////////////////////////
// Behavioural Logic
/////////////////////////////////////////////////////
// synthesis translate_off
// Check for non-aligned loads or stores
always @(posedge clk_i)
begin
if (((load_q_m == `TRUE) || (store_q_m == `TRUE)) && (stall_m == `FALSE))
begin
if ((size_m === `LM32_SIZE_HWORD) && (load_store_address_m[0] !== 1'b0))
$display ("Warning: Non-aligned halfword access. Address: 0x%0x Time: %0t.", load_store_address_m, $time);
if ((size_m === `LM32_SIZE_WORD) && (load_store_address_m[1:0] !== 2'b00))
$display ("Warning: Non-aligned word access. Address: 0x%0x Time: %0t.", load_store_address_m, $time);
end
end
// synthesis translate_on
endmodule