framebuffer: FIFO

milkymist/framebuffer/__init__.py

@@ -111,12 +111,44 @@ class FIFO(Actor):
 		self.vga_clk = Signal()
 		self.vga_hsync_n = Signal()
 		self.vga_vsync_n = Signal()
-		self.vga_r = Signal(BV(8))
-		self.vga_g = Signal(BV(8))
-		self.vga_b = Signal(BV(8))
+		self.vga_r = Signal(BV(_bpc_dac))
+		self.vga_g = Signal(BV(_bpc_dac))
+		self.vga_b = Signal(BV(_bpc_dac))
 	
 	def get_fragment(self):
-		return Fragment() # TODO
+		data_width = 2+3*_bpc_dac
+		asfifo = Instance("asfifo",
+			[
+				("data_out", BV(data_width)),
+				("empty", BV(1)),
+				
+				("full", BV(1))
+			], [
+				("read_en", BV(1)),
+				("clk_read", self.vga_clk),
+				
+				("data_in", BV(data_width)),
+				("write_en", BV(1)),
+				
+				("rst", BV(1))
+			],
+			parameters=[
+				("data_width", data_width),
+				("address_width", 8)
+			],
+			clkport="clk_write")
+		t = self.token("dac")
+		return Fragment([
+			Cat(self.vga_hsync_n, self.vga_vsync_n, self.vga_r, self.vga_g, self.vga_b).eq(asfifo.outs["data_out"]),
+			asfifo.ins["read_en"].eq(1),
+			
+			self.endpoints["dac"].ack.eq(~asfifo.outs["full"]),
+			asfifo.ins["write_en"].eq(self.endpoints["dac"].stb),
+			asfifo.ins["data_in"].eq(Cat(~t.hsync, ~t.vsync, t.r, t.g, t.b)),
+			
+			self.busy.eq(0),
+			asfifo.ins["rst"].eq(0)
+		], instances=[asfifo])
 
 class Framebuffer:
 	def __init__(self, address, asmiport):

verilog/generic/asfifo.v

@@ -0,0 +1,98 @@
+/*
+ * This file is based on "Asynchronous FIFO" by Alex Claros F.,
+ * itself based on the article "Asynchronous FIFO in Virtex-II FPGAs"
+ * by Peter Alfke.
+ */
+
+module asfifo #(
+	parameter data_width = 8,
+	parameter address_width = 4,
+	parameter fifo_depth = (1 << address_width)
+) (
+	/* Read port */
+	output [data_width-1:0] data_out,
+	output reg empty,
+	input read_en,
+	input clk_read,
+	
+	/* Write port */
+	input [data_width-1:0] data_in,
+	output reg full,
+	input write_en,
+	input clk_write,
+	
+	/* Asynchronous reset */
+	input rst
+);
+
+reg [data_width-1:0] mem[fifo_depth-1:0];
+wire [address_width-1:0] write_index, read_index;
+wire equal_addresses;
+wire write_en_safe, read_en_safe;
+wire set_status, clear_status;
+reg status;
+wire preset_full, preset_empty;
+
+assign data_out = mem[read_index];
+
+always @(posedge clk_write) begin
+	if(write_en & !full)
+		mem[write_index] <= data_in;
+end
+
+assign write_en_safe = write_en & ~full;
+assign read_en_safe = read_en & ~empty;
+
+asfifo_graycounter #(
+	.width(address_width)
+) counter_write (
+	.gray_count(write_index),
+	.ce(write_en_safe),
+	.rst(rst),
+	.clk(clk_write)
+);
+
+asfifo_graycounter #(
+	.width(address_width)
+) counter_read (
+	.gray_count(read_index),
+	.ce(read_en_safe),
+	.rst(rst),
+	.clk(clk_read)
+);
+
+assign equal_addresses = (write_index == read_index);
+
+assign set_status = (write_index[address_width-2] ~^ read_index[address_width-1]) &
+	(write_index[address_width-1] ^ read_index[address_width-2]);
+
+assign clear_status = ((write_index[address_width-2] ^ read_index[address_width-1]) &
+	(write_index[address_width-1] ~^ read_index[address_width-2]))
+	| rst;
+
+always @(posedge clear_status, posedge set_status) begin
+	if(clear_status)
+		status <= 1'b0;
+	else
+		status <= 1'b1;
+end
+
+assign preset_full = status & equal_addresses;
+
+always @(posedge clk_write, posedge preset_full) begin
+	if(preset_full)
+		full <= 1'b1;
+	else
+		full <= 1'b0;
+end
+
+assign preset_empty = ~status & equal_addresses;
+
+always @(posedge clk_read, posedge preset_empty) begin
+	if(preset_empty)
+		empty <= 1'b1;
+	else
+		empty <= 1'b0;
+end
+
+endmodule

verilog/generic/asfifo_graycounter.v

@@ -0,0 +1,29 @@
+/*
+ * This file is based on "Asynchronous FIFO" by Alex Claros F.,
+ * itself based on the article "Asynchronous FIFO in Virtex-II FPGAs"
+ * by Peter Alfke.
+ */
+
+module asfifo_graycounter #(
+	parameter width = 2
+) (
+	output reg [width-1:0] gray_count,
+	input ce,
+	input rst,
+	input clk
+);
+
+reg [width-1:0] binary_count;
+
+always @(posedge clk, posedge rst) begin
+	if(rst) begin
+		binary_count <= {width{1'b0}} + 1;
+		gray_count <= {width{1'b0}};
+	end else if(ce) begin
+		binary_count <= binary_count + 1;
+		gray_count <= {binary_count[width-1],
+				binary_count[width-2:0] ^ binary_count[width-1:1]};
+	end
+end
+
+endmodule