update driver api

examples/de0_nano/client/test_miio.py

@@ -15,9 +15,9 @@ miio = miio.MiIo(MIIO_ADDR, 8, "IO", csr)
 
 def led_anim0():
 	for i in range(10):
-		miio.write(0xA5)
+		miio.set(0xA5)
 		time.sleep(0.1)
-		miio.write(0x5A)
+		miio.set(0x5A)
 		time.sleep(0.1)
 
 def led_anim1():
@@ -25,13 +25,13 @@ def led_anim1():
 		#Led <<
 		ledData = 1
 		for i in range(8):
-			miio.write(ledData)
+			miio.set(ledData)
 			time.sleep(i*i*0.0020)
 			ledData = (ledData<<1)
 		#Led >>
 		ledData = 128
 		for i in range(8): 
-			miio.write(ledData)
+			miio.set(ledData)
 			time.sleep(i*i*0.0020)
 			ledData = (ledData>>1)
 
@@ -39,11 +39,11 @@ def led_anim1():
 #                  T E S T  M I G I O 
 #==============================================================================
 
-print("- Small Led Animation...")
+print("- Led Animation...")
 led_anim0()
 time.sleep(1)
 led_anim1()
 time.sleep(1)
 
 print("- Read Switch: ",end=' ')
-print("%02X" %miio.read())
+print("%02X" %miio.get())

examples/de0_nano/client/test_mila.py

@@ -35,10 +35,10 @@ def capture(size):
 	global recorder
 	global dat_vcd
 	sum_tt = gen_truth_table("term")
-	mila.trigger.sum.write(sum_tt)
+	mila.trigger.sum.set(sum_tt)
 	mila.recorder.reset()
-	recorder.size(rec_size)	
-	mila.recorder.offset(rec_offset)
+	recorder.set_size(rec_size)	
+	mila.recorder.set_offset(rec_offset)
 	mila.recorder.arm()
 	print("-Recorder [Armed]")
 	print("-Waiting Trigger...", end=' ')
@@ -48,12 +48,12 @@ def capture(size):
 	
 	print("-Receiving Data...", end=' ')
 	sys.stdout.flush()
-	dat_vcd += mila.recorder.read(size)
+	dat_vcd += mila.recorder.pull(size)
 	print("[Done]")
 
 print("Capturing ...")
 print("----------------------")
-term.write(0x0000, 0xFFFF)
+term.set(0x0000, 0xFFFF)
 capture(rec_size)
 
 mila_layout = [

miscope/miio.py

@@ -37,8 +37,8 @@ class MiIo:
 	#
 	# Driver
 	#
-	def write(self, data):
+	def set(self, data):
 			self.interface.write(self.bank.get_base(), data)
 			
-	def read(self):
+	def get(self):
 		return self.interface.read(self.bank.get_base() + self.words)

miscope/mila.py

@@ -28,8 +28,6 @@ class MiLa:
 		self.trigger.set_interface(interface)
 		self.recorder.set_interface(interface)
 		
-
-	
 	def get_fragment(self):
 		comb =[
 			self.trigger.trig.eq(self.trig),

miscope/recorder.py

@@ -129,7 +129,6 @@ class Sequencer:
 			self.enable.eq(1)
 		)
 		
-		# trig_hit rising_edge
 		hit_rising = RisingEdge(self.hit)
 		
 		# connexion
@@ -243,13 +242,13 @@ class Recorder:
 	def is_done(self):
 		return self.interface.read(self.bank.get_base() + REC_DONE_BASE) == 1
 		
-	def size(self, dat):
+	def set_size(self, dat):
 		self.interface.write_n(self.bank.get_base() + REC_SIZE_BASE, dat, 16)
 		
-	def offset(self, dat):
+	def set_offset(self, dat):
 		self.interface.write_n(self.bank.get_base() + REC_OFFSET_BASE, dat, 16)
 		
-	def read(self, size):
+	def pull(self, size):
 		r = []
 		for i in range(size):
 			self.interface.write(self.bank.get_base() + REC_READ_BASE, 1)

miscope/trigger.py

@@ -39,20 +39,20 @@ class Term:
 		self.reg_p = RegParams("term_reg", 0, width, 2)
 		self.reg = None
 	
-	def get_registers_glue(self):
+	def get_registers_comb(self):
 		comb = [self.t.eq(self.reg.field.r[0*self.width:1*self.width])]
 		comb += [self.m.eq(self.reg.field.r[1*self.width:2*self.width])]
 		return comb
 	
 	def get_fragment(self):
 		comb = [self.o.eq((self.m & self.i) == self.t)]
-		comb += self.get_registers_glue()
+		comb += self.get_registers_comb()
 		return Fragment(comb)
 	
 	#
 	# Driver
 	#
-	def write(self, dat, mask=None):
+	def set(self, dat, mask=None):
 		if mask is None:
 			mask = (2**self.width)-1
 		self.interface.write_n(self.reg_p.base, mask, self.width)	
@@ -75,22 +75,22 @@ class RangeDetector:
 		self.high = Signal(width)
 		self.o = Signal()
 		
-	def get_registers_glue(self):
+	def get_registers_comb(self):
 		comb = [self.low.eq(self.reg.field.r[0*self.width:1*self.width])]
 		comb += [self.low.eq(self.reg.field.r[1*self.width:2*self.width])]
 		return comb
 		
 	def get_fragment(self):
 		comb = [self.o.eq((self.i >= self.low) & (self.i <= self.high))]
-		comb += self.get_registers_glue()
+		comb += self.get_registers_comb()
 		return Fragment(comb)
 	#
 	# Driver
 	#
-	def write_low(self, dat):
+	def set_low(self, dat):
 		self.interface.write_n(self.reg_p.base, dat ,self.width)
 	
-	def write_high(self, dat):
+	def set_high(self, dat):
 		self.interface.write_n(self.reg_p.base + self.reg_p.words, dat ,self.width)
 
 class EdgeDetector:
@@ -118,7 +118,7 @@ class EdgeDetector:
 			self.bo = Signal()
 		self.o = Signal()
 	
-	def get_registers_glue(self):
+	def get_registers_comb(self):
 		comb = []
 		i = 0
 		if "R" in self.mode:
@@ -158,7 +158,7 @@ class EdgeDetector:
 		comb += [self.o.eq(self.ro | self.fo | self.bo)]
 		
 		# Registers
-		comb += self.get_registers_glue()
+		comb += self.get_registers_comb()
 		
 		return Fragment(comb, sync)
 		
@@ -180,13 +180,13 @@ class EdgeDetector:
 			return r
 		return 0
 			
-	def write_r(self, dat):
+	def set_r(self, dat):
 		self.interface.write_n(self.reg_p.base + self.get_offset("R"), dat ,self.width)
 	
-	def write_f(self, dat):
+	def set_f(self, dat):
 		self.interface.write_n(self.reg_p.base + self.get_offset("F"), dat ,self.width)
 		
-	def write_b(self, dat):
+	def set_b(self, dat):
 		self.interface.write_n(self.reg_p.base + self.get_offset("B"), dat ,self.width)
 
 class Sum:
@@ -212,7 +212,7 @@ class Sum:
 		self._lut_port = self._mem.get_port()
 		self._prog_port = self._mem.get_port(write_capable=True)
 	
-	def get_registers_glue(self):
+	def get_registers_comb(self):
 		comb = [
 			self.prog_adr.eq(self.reg.field.r[0:16]),
 			self.prog_dat.eq(self.reg.field.r[16]),
@@ -231,13 +231,13 @@ class Sum:
 				
 				self.o.eq(self._o)
 		]
-		comb += self.get_registers_glue()
+		comb += self.get_registers_comb()
 		return Fragment(comb, specials={self._mem})
 	
 	#
 	# Driver
 	#
-	def write(self, truth_table):
+	def set(self, truth_table):
 		for i in range(len(truth_table)):
 			val = truth_table[i]
 			we = 1<<17