actorlib: ASMI sequential reader

examples/dataflow/dma.py

@@ -3,7 +3,7 @@ from random import Random
 from migen.fhdl import verilog
 from migen.flow.ala import *
 from migen.flow.network import *
-from migen.actorlib import dma_wishbone
+from migen.actorlib import dma_wishbone, dma_asmi
 from migen.actorlib.sim import *
 from migen.bus import wishbone, asmibus
 from migen.sim.generic import Simulator
@@ -45,13 +45,27 @@ def wishbone_sim(efragment, master, end_simulation):
 	peripheral = wishbone.Target(MyModelWB())
 	tap = wishbone.Tap(peripheral.bus)
 	interconnect = wishbone.InterconnectPointToPoint(master.bus, peripheral.bus)
-
+	def _end_simulation(s):
+		s.interrupt = end_simulation(s)
 	fragment = efragment \
 		+ peripheral.get_fragment() \
 		+ tap.get_fragment() \
 		+ interconnect.get_fragment() \
-		+ Fragment(sim=[end_simulation])
-	
+		+ Fragment(sim=[_end_simulation])
+	sim = Simulator(fragment, Runner())
+	sim.run()
+
+def asmi_sim(efragment, hub, end_simulation):
+	def _end_simulation(s):
+		s.interrupt = end_simulation(s)
+	peripheral = asmibus.Target(hub, MyModelASMI())
+	tap = asmibus.Tap(hub)
+	def _end_simulation(s):
+		s.interrupt = end_simulation(s)
+	fragment = efragment \
+		+ peripheral.get_fragment() \
+		+ tap.get_fragment() \
+		+ Fragment(sim=[_end_simulation])
 	sim = Simulator(fragment, Runner())
 	sim.run()
 
@@ -65,9 +79,8 @@ def test_wb_reader():
 	g.add_connection(reader, dumper)
 	comp = CompositeActor(g)
 	
-	def end_simulation(s):
-		s.interrupt = adrgen.done and not s.rd(comp.busy)
-	wishbone_sim(comp.get_fragment(), reader, end_simulation)
+	wishbone_sim(comp.get_fragment(), reader,
+		lambda s: adrgen.done and not s.rd(comp.busy))
 
 def test_wb_writer():
 	print("*** Testing Wishbone writer")
@@ -77,9 +90,27 @@ def test_wb_writer():
 	g.add_connection(trgen, writer)
 	comp = CompositeActor(g)
 	
-	def end_simulation(s):
-		s.interrupt = trgen.done and not s.rd(comp.busy)
-	wishbone_sim(comp.get_fragment(), writer, end_simulation)
+	wishbone_sim(comp.get_fragment(), writer,
+		lambda s: trgen.done and not s.rd(comp.busy))
+
+def test_asmi_seqreader():
+	print("*** Testing ASMI sequential reader")
+	
+	hub = asmibus.Hub(32, 32)
+	port = hub.get_port()
+	hub.finalize()
+	
+	adrgen = SimActor(adrgen_gen(), ("address", Source, [("a", BV(32))]))
+	reader = dma_asmi.SequentialReader(port)
+	dumper = SimActor(dumper_gen(), ("data", Sink, [("d", BV(32))]))
+	g = DataFlowGraph()
+	g.add_connection(adrgen, reader)
+	g.add_connection(reader, dumper)
+	comp = CompositeActor(g)
+	
+	asmi_sim(hub.get_fragment() + comp.get_fragment(), hub,
+		lambda s: adrgen.done and not s.rd(comp.busy))
 
 test_wb_reader()
 test_wb_writer()
+test_asmi_seqreader()

migen/actorlib/dma_asmi.py

@@ -0,0 +1,44 @@
+from migen.fhdl.structure import *
+from migen.flow.actor import *
+
+class SequentialReader(Actor):
+	def __init__(self, port):
+		self.port = port
+		assert(len(self.port.slots) == 1)
+		super().__init__(
+			("address", Sink, [("a", BV(self.port.hub.aw))]),
+			("data", Source, [("d", BV(self.port.hub.dw))]))
+	
+	def get_fragment(self):
+		sample = Signal()
+		data_reg_loaded = Signal()
+		data_reg = Signal(BV(self.port.hub.dw))
+		
+		accept_new = Signal()
+		
+		# We check that len(self.port.slots) == 1
+		# and therefore we can assume that self.port.ack
+		# goes low until the data phase.
+		
+		comb = [
+			self.busy.eq(~data_reg_loaded | ~self.port.ack),
+			self.port.adr.eq(self.token("address").a),
+			self.port.we.eq(0),
+			accept_new.eq(~data_reg_loaded | self.endpoints["data"].ack),
+			self.port.stb.eq(self.endpoints["address"].stb & accept_new),
+			self.endpoints["address"].ack.eq(self.port.ack & accept_new),
+			self.endpoints["data"].stb.eq(data_reg_loaded),
+			self.token("data").d.eq(data_reg)
+		]
+		sync = [
+			If(self.endpoints["data"].ack,
+				data_reg_loaded.eq(0)
+			),
+			If(sample,
+				data_reg_loaded.eq(1),
+				data_reg.eq(self.port.dat_r)
+			),
+			sample.eq(self.port.get_call_expression())
+		]
+		
+		return Fragment(comb, sync)