interconnect/ahb: Cleanup and document a bit.

litex/soc/interconnect/ahb.py

@@ -1,67 +1,87 @@
+#
+# This file is part of LiteX.
+#
+# Copyright (c) 2021 Ilia Sergachev <ilia.sergachev@protonmail.ch>
+# Copyright (c) 2023 Florent Kermarrec <florent@enjoy-digital.fr>
+# SPDX-License-Identifier: BSD-2-Clause
+
+"""AHB support for LiteX"""
+
 from enum import IntEnum
+
 from migen import *
 
+from litex.gen import *
+
+# Helpers ------------------------------------------------------------------------------------------
 
 class TransferType(IntEnum):
-    IDLE = 0
-    BUSY = 1
+    """Defines types of AHB transfers."""
+    IDLE          = 0
+    BUSY          = 1
     NONSEQUENTIAL = 2
-    SEQUENTIAL = 3
+    SEQUENTIAL    = 3
 
+# AHB Interface ------------------------------------------------------------------------------------
 
 class Interface(Record):
-    adr_width = 32
-    data_width = 32
-
+    """Sets up the AHB interface signals for master and slave."""
+    adr_width      = 32
+    data_width     = 32
     master_signals = [
-        ('addr', adr_width),
-        ('burst', 3),
-        ('mastlock', 1),
-        ('prot', 4),
-        ('size', 3),
-        ('trans', 2),
-        ('wdata', data_width),
-        ('write', 1),
-        ('sel', 1),
+        ("addr",     adr_width),
+        ("burst",    3),
+        ("mastlock", 1),
+        ("prot",     4),
+        ("size",     3),
+        ("trans",    2),
+        ("wdata",    data_width),
+        ("write",    1),
+        ("sel",      1),
     ]
-
     slave_signals = [
-        ('rdata', data_width),
-        ('readyout', 1),
-        ('resp', 1),
+        ("rdata",    data_width),
+        ("readyout", 1),
+        ("resp",     1),
     ]
-
     def __init__(self):
         Record.__init__(self, set_layout_parameters(self.master_signals + self.slave_signals))
 
+# AHB to Wishbone  ---------------------------------------------------------------------------------
 
-class AHB2Wishbone(Module):
+class AHB2Wishbone(LiteXModule):
+    """
+    This module converts AHB protocol transactions to the Wishbone protocol.
+
+    It takes as input an AHB interface and a Wishbone interface and does the conversion.
+    """
     def __init__(self, ahb, wishbone):
-        wb = wishbone
         wishbone_adr_shift = log2_int(ahb.data_width // 8)
-        assert ahb.data_width == wb.data_width
-        assert ahb.adr_width == wb.adr_width + wishbone_adr_shift
+        assert ahb.data_width == wishbone.data_width
+        assert ahb.adr_width == wishbone.adr_width + wishbone_adr_shift
 
-        self.comb += [
-            ahb.resp.eq(wb.err),
-        ]
+        self.comb += ahb.resp.eq(wishbone.err)
 
-        self.submodules.fsm = fsm = FSM()
+        self.fsm = fsm = FSM()
         fsm.act("IDLE",
             ahb.readyout.eq(1),
-            If(ahb.sel & (ahb.size == wishbone_adr_shift) & (ahb.trans == TransferType.NONSEQUENTIAL),
-               NextValue(wb.adr, ahb.addr[2:]),
-               NextValue(wb.dat_w, ahb.wdata),
-               NextValue(wb.we, ahb.write),
-               NextValue(wb.sel, 2 ** len(wb.sel) - 1),
-               NextState('ACT'),
+            If(ahb.sel &
+              (ahb.size  == wishbone_adr_shift) &
+              (ahb.trans == TransferType.NONSEQUENTIAL),
+               NextValue(wishbone.adr, ahb.addr[2:]),
+               NextValue(wishbone.dat_w, ahb.wdata),
+               NextValue(wishbone.we, ahb.write),
+               NextValue(wishbone.sel, 2**len(wishbone.sel) - 1),
+               NextState("ACT"),
             )
         )
         fsm.act("ACT",
-            wb.stb.eq(1),
-            wb.cyc.eq(1),
-            If(wb.ack,
-               If(~wb.we, NextValue(ahb.rdata, wb.dat_r)),
-               NextState("IDLE")
+            wishbone.stb.eq(1),
+            wishbone.cyc.eq(1),
+            If(wishbone.ack,
+                If(~wishbone.we,
+                    NextValue(ahb.rdata, wishbone.dat_r)
+                ),
+                NextState("IDLE")
             )
         )