litex/software/videomixer/main.c

146 lines
2.7 KiB
C

#include <stdio.h>
#include <stdlib.h>
#include <irq.h>
#include <uart.h>
#include <time.h>
#include <hw/csr.h>
#include <hw/flags.h>
#include <console.h>
#include "fb.h"
#include "dvisampler0.h"
#include "dvisampler1.h"
#ifdef POTS_BASE
static int scale_pot(int raw, int range)
{
int pot_min = 64000;
int pot_max = 103000;
int scaled;
scaled = range*(raw - pot_min)/(pot_max - pot_min);
if(scaled < 0)
scaled = 0;
if(scaled > range)
scaled = range;
return scaled;
}
static void regular_blend(int p0, int p1)
{
int blackout;
int crossfade;
blackout = scale_pot(p0, 256);
crossfade = scale_pot(p1, 255);
fb_blender_f0_write(crossfade*blackout >> 8);
fb_blender_f1_write((255-crossfade)*blackout >> 8);
}
static void additive_blend(int p0, int p1)
{
fb_blender_f0_write(scale_pot(p0, 255));
fb_blender_f1_write(scale_pot(p1, 255));
}
static void ui_service(void)
{
static int last_event;
static int additive_blend_enabled;
static int old_btn;
int btn;
int p0, p1;
if(elapsed(&last_event, identifier_frequency_read()/32)) {
btn = buttons_in_read() & 0x1;
if(btn && !old_btn) {
additive_blend_enabled = !additive_blend_enabled;
if(additive_blend_enabled)
leds_out_write(leds_out_read() | 0x1);
else
leds_out_write(leds_out_read() & ~0x1);
}
old_btn = btn;
pots_start_busy_write(1);
while(pots_start_busy_read());
p0 = pots_res0_read();
p1 = pots_res1_read();
if(!additive_blend_enabled)
regular_blend(p0, p1);
else
additive_blend(p0, p1);
}
}
#else
static void ui_service(void)
{
fb_blender_f0_write(0xff);
fb_blender_f1_write(0xff);
}
#endif
static void fb_service(void)
{
int c;
if(readchar_nonblock()) {
c = readchar();
if(c == '1') {
fb_enable(1);
printf("Framebuffer is ON\n");
} else if(c == '0') {
fb_enable(0);
printf("Framebuffer is OFF\n");
}
}
}
static void membw_service(void)
{
static int last_event;
unsigned long long int nr, nw;
unsigned long long int f;
unsigned int rdb, wrb;
if(elapsed(&last_event, identifier_frequency_read())) {
lasmicon_bandwidth_update_write(1);
nr = lasmicon_bandwidth_nreads_read();
nw = lasmicon_bandwidth_nwrites_read();
f = identifier_frequency_read();
rdb = (nr*f >> (24 - 7))/1000000ULL;
wrb = (nw*f >> (24 - 7))/1000000ULL;
printf("read:%5dMbps write:%5dMbps all:%5dMbps\n", rdb, wrb, rdb + wrb);
}
}
int main(void)
{
irq_setmask(0);
irq_setie(1);
uart_init();
puts("Minimal video mixer software built "__DATE__" "__TIME__"\n");
time_init();
fb_set_mode(FB_MODE_1024_768);
dvisampler0_init_video();
dvisampler1_init_video();
fb_enable(1);
while(1) {
dvisampler0_service();
dvisampler1_service();
ui_service();
fb_service();
membw_service();
}
return 0;
}