litex/misoclib/mor1kx/__init__.py

74 lines
1.7 KiB
Python

from migen.fhdl.std import *
from migen.bus import wishbone
class MOR1KX(Module):
def __init__(self, reset_pc):
self.ibus = i = wishbone.Interface()
self.dbus = d = wishbone.Interface()
self.interrupt = Signal(32)
###
i_adr_o = Signal(32)
d_adr_o = Signal(32)
self.specials += Instance("mor1kx",
p_FEATURE_INSTRUCTIONCACHE="ENABLED",
p_OPTION_ICACHE_BLOCK_WIDTH=4,
p_OPTION_ICACHE_SET_WIDTH=8,
p_OPTION_ICACHE_WAYS=1,
p_OPTION_ICACHE_LIMIT_WIDTH=31,
p_FEATURE_DATACACHE="ENABLED",
p_OPTION_DCACHE_BLOCK_WIDTH=4,
p_OPTION_DCACHE_SET_WIDTH=8,
p_OPTION_DCACHE_WAYS=1,
p_OPTION_DCACHE_LIMIT_WIDTH=31,
p_FEATURE_TIMER="NONE",
p_OPTION_PIC_TRIGGER="LEVEL",
p_FEATURE_SYSCALL="NONE",
p_FEATURE_TRAP="NONE",
p_FEATURE_RANGE="NONE",
p_FEATURE_OVERFLOW="NONE",
p_FEATURE_ADDC="NONE",
p_FEATURE_CMOV="NONE",
p_FEATURE_FFL1="NONE",
p_OPTION_CPU0="CAPPUCCINO",
p_OPTION_RESET_PC=reset_pc,
p_IBUS_WB_TYPE="B3_REGISTERED_FEEDBACK",
p_DBUS_WB_TYPE="B3_REGISTERED_FEEDBACK",
i_clk=ClockSignal(),
i_rst=ResetSignal(),
i_irq_i=self.interrupt,
o_iwbm_adr_o=i_adr_o,
o_iwbm_dat_o=i.dat_w,
o_iwbm_sel_o=i.sel,
o_iwbm_cyc_o=i.cyc,
o_iwbm_stb_o=i.stb,
o_iwbm_we_o=i.we,
o_iwbm_cti_o=i.cti,
o_iwbm_bte_o=i.bte,
i_iwbm_dat_i=i.dat_r,
i_iwbm_ack_i=i.ack,
i_iwbm_err_i=i.err,
i_iwbm_rty_i=0,
o_dwbm_adr_o=d_adr_o,
o_dwbm_dat_o=d.dat_w,
o_dwbm_sel_o=d.sel,
o_dwbm_cyc_o=d.cyc,
o_dwbm_stb_o=d.stb,
o_dwbm_we_o=d.we,
o_dwbm_cti_o=d.cti,
o_dwbm_bte_o=d.bte,
i_dwbm_dat_i=d.dat_r,
i_dwbm_ack_i=d.ack,
i_dwbm_err_i=d.err,
i_dwbm_rty_i=0)
self.comb += [
self.ibus.adr.eq(i_adr_o[2:]),
self.dbus.adr.eq(d_adr_o[2:])
]