litex/misoclib/sdramphy/gensdrphy.py

95 lines
2.2 KiB
Python

#
# 1:1 frequency-ratio Generic SDR PHY
#
# The GENSDRPHY is validated on CycloneIV (Altera) but since it does
# not use vendor-dependent code, it can also be used on other architectures.
#
# The PHY needs 2 Clock domains:
# - sys_clk : The System Clock domain
# - sys_clk_ps : The System Clock domain with its phase shifted
# (-3ns on C4@100MHz)
#
# Assert dfi_wrdata_en and present the data
# on dfi_wrdata_mask/dfi_wrdata in the same
# cycle as the write command.
#
# Assert dfi_rddata_en in the same cycle as the read
# command. The data will come back on dfi_rddata
# 4 cycles later, along with the assertion of
# dfi_rddata_valid.
#
# This PHY only supports CAS Latency 2.
#
from migen.fhdl.std import *
from migen.bus.dfi import *
from migen.genlib.record import *
from migen.fhdl.specials import *
from misoclib import lasmicon
class GENSDRPHY(Module):
def __init__(self, pads):
a = flen(pads.a)
ba = flen(pads.ba)
d = flen(pads.dq)
self.phy_settings = lasmicon.PhySettings(
memtype="SDR",
dfi_d=d,
nphases=1,
rdphase=0,
wrphase=0,
rdcmdphase=0,
wrcmdphase=0,
cl=2,
read_latency=4,
write_latency=0
)
self.dfi = Interface(a, ba, d)
###
#
# Command/address
#
self.sync += [
pads.a.eq(self.dfi.p0.address),
pads.ba.eq(self.dfi.p0.bank),
pads.cke.eq(self.dfi.p0.cke),
pads.cas_n.eq(self.dfi.p0.cas_n),
pads.ras_n.eq(self.dfi.p0.ras_n),
pads.we_n.eq(self.dfi.p0.we_n)
]
if hasattr(pads, "cs_n"):
self.sync += pads.cs_n.eq(self.dfi.p0.cs_n),
#
# DQ/DQS/DM data
#
sd_dq_out = Signal(d)
drive_dq = Signal()
self.sync += sd_dq_out.eq(self.dfi.p0.wrdata),
self.specials += Tristate(pads.dq, sd_dq_out, drive_dq)
self.sync += \
If(self.dfi.p0.wrdata_en,
pads.dm.eq(self.dfi.p0.wrdata_mask)
).Else(
pads.dm.eq(0)
)
sd_dq_in_ps = Signal(d)
self.sync.sys_ps += sd_dq_in_ps.eq(pads.dq)
self.sync += self.dfi.p0.rddata.eq(sd_dq_in_ps)
#
# DQ/DM control
#
d_dfi_wrdata_en = Signal()
self.sync += d_dfi_wrdata_en.eq(self.dfi.p0.wrdata_en)
self.comb += drive_dq.eq(d_dfi_wrdata_en)
rddata_sr = Signal(4)
self.comb += self.dfi.p0.rddata_valid.eq(rddata_sr[3])
self.sync += rddata_sr.eq(Cat(self.dfi.p0.rddata_en, rddata_sr[:3]))