litex/examples/de1/top.py

146 lines
3.9 KiB
Python

################################################################################
# _____ _ ____ _ _ _ _
# | __|___ |_|___ _ _ | \|_|___|_| |_ ___| |
# | __| | | | . | | | | | | | . | | _| .'| |
# |_____|_|_|_| |___|_ | |____/|_|_ |_|_| |__,|_|
# |___| |___| |___|
#
# Copyright 2012 / Florent Kermarrec / florent@enjoy-digital.fr
#
# migScope Example on De1 Board
# ----------------------------------
################################################################################
#
# In this example signals are generated in the FPGA.
# We will use migScope to record those signals and visualize them.
#
# Example architecture:
# ----------------------
# migScope Config --> Python Client (Host) --> Vcd Output
# & Trig |
# Arduino (Uart<-->Spi Bridge)
# |
# De1
# |
# +--------------------+-----------------------+
# migIo Signal Generator migLa
# Control of Signal Ramp, Sinus, Logic Analyzer
# generator Square, ...
###############################################################################
#==============================================================================
# I M P O R T
#==============================================================================
from migen.fhdl.structure import *
from migen.fhdl import verilog, autofragment
from migen.bus import csr
from migen.bus.transactions import *
from migen.bank import description, csrgen
from migen.bank.description import *
import sys
sys.path.append("../../")
from migScope import trigger, recorder, migIo
import spi2Csr
from timings import *
from constraints import Constraints
#==============================================================================
# P A R A M E T E R S
#==============================================================================
#Timings Param
clk_freq = 50*MHz
clk_period_ns = clk_freq*ns
n = t2n(clk_period_ns)
# Bus Width
trig_width = 16
dat_width = 16
# Record Size
record_size = 1024
# Csr Addr
MIGIO_ADDR = 0x0000
TRIGGER_ADDR = 0x0200
RECORDER_ADDR = 0x0400
#==============================================================================
# M I S C O P E E X A M P L E
#==============================================================================
def get():
# migIo
migIo0 = migIo.MigIo(MIGIO_ADDR, 8, "IO")
# Trigger
term0 = trigger.Term(trig_width)
trigger0 = trigger.Trigger(TRIGGER_ADDR, trig_width, dat_width, [term0])
# Recorder
recorder0 = recorder.Recorder(RECORDER_ADDR, dat_width, record_size)
# Spi2Csr
spi2csr0 = spi2Csr.Spi2Csr(16,8)
# Csr Interconnect
csrcon0 = csr.Interconnect(spi2csr0.csr,
[
migIo0.bank.interface,
trigger0.bank.interface,
recorder0.bank.interface
])
comb = []
sync = []
# Signal Generator
sig_gen = Signal(BV(trig_width))
sync += [
sig_gen.eq(sig_gen+1)
]
#comb += [sig_gen.eq(migIo0.o)]
# Led
led0 = Signal(BV(8))
comb += [led0.eq(migIo0.o[:8])]
#Switch
sw0 = Signal(BV(8))
comb += [migIo0.i.eq(sw0)]
# Dat / Trig Bus
comb += [
trigger0.in_trig.eq(sig_gen),
trigger0.in_dat.eq(sig_gen)
]
# Trigger --> Recorder
comb += [
recorder0.trig_dat.eq(trigger0.dat),
recorder0.trig_hit.eq(trigger0.hit)
]
# HouseKeeping
in_clk = Signal()
in_rst_n = Signal()
in_rst = Signal()
comb += [
in_rst.eq(~in_rst_n)
]
frag = autofragment.from_local()
frag += Fragment(sync=sync,comb=comb)
cst = Constraints(in_clk, in_rst_n, spi2csr0, led0, sw0)
src_verilog, vns = verilog.convert(frag,
cst.get_ios(),
name="de1",
clk_signal = in_clk,
rst_signal = in_rst,
return_ns=True)
src_qsf = cst.get_qsf(vns)
return (src_verilog, src_qsf)