litex/mibuild/platforms/lx9_microboard.py

131 lines
5.2 KiB
Python

from mibuild.generic_platform import *
from mibuild.xilinx import XilinxPlatform
_io = [
("user_btn", 0, Pins("V4"), IOStandard("LVCMOS33"),
Misc("PULLDOWN"), Misc("TIG")),
("user_led", 0, Pins("P4"), Misc("SLEW=QUIETIO"), IOStandard("LVCMOS18")),
("user_led", 1, Pins("L6"), Misc("SLEW=QUIETIO"), IOStandard("LVCMOS18")),
("user_led", 2, Pins("F5"), Misc("SLEW=QUIETIO"), IOStandard("LVCMOS18")),
("user_led", 3, Pins("C2"), Misc("SLEW=QUIETIO"), IOStandard("LVCMOS18")),
("user_dip", 0, Pins("B3"), Misc("PULLDOWN"), IOStandard("LVCMOS33")),
("user_dip", 1, Pins("A3"), Misc("PULLDOWN"), IOStandard("LVCMOS33")),
("user_dip", 2, Pins("B4"), Misc("PULLDOWN"), IOStandard("LVCMOS33")),
("user_dip", 3, Pins("A4"), Misc("PULLDOWN"), IOStandard("LVCMOS33")),
# TI CDCE913 programmable triple-output PLL
("clk_y1", 0, Pins("V10"), IOStandard("LVCMOS33")), # default: 40 MHz
("clk_y2", 0, Pins("K15"), IOStandard("LVCMOS33")), # default: 66 2/3 MHz
("clk_y3", 0, Pins("C10"), IOStandard("LVCMOS33")), # default: 100 MHz
# Maxim DS1088LU oscillator, not populated
("clk_backup", 0, Pins("R8"), IOStandard("LVCMOS33")),
# TI CDCE913 PLL I2C control
("pll", 0,
Subsignal("scl", Pins("P12")),
Subsignal("sda", Pins("U13")),
Misc("PULLUP"),
IOStandard("LVCMOS33")),
# Micron N25Q128 SPI Flash
("spiflash", 0,
Subsignal("clk", Pins("R15")),
Subsignal("cs_n", Pins("V3")),
Subsignal("dq", Pins("T13 R13 T14 V14")),
IOStandard("LVCMOS33")),
# PMOD extension connectors
("pmod", 0,
Subsignal("d", Pins("F15 F16 C17 C18 F14 G14 D17 D18")),
IOStandard("LVCMOS33")),
("pmod", 1,
Subsignal("d", Pins("H12 G13 E16 E18 K12 K13 F17 F18")),
IOStandard("LVCMOS33")),
("pmod_diff", 0,
Subsignal("io", Pins("F15 C17 F14 D17 H12 E16 K12 F17")),
Subsignal("iob", Pins("F16 C18 G14 D18 G13 E18 K13 F18")),
IOStandard("LVCMOS33")),
("serial", 0,
Subsignal("tx", Pins("T7"), Misc("SLEW=SLOW")),
Subsignal("rx", Pins("R7"), Misc("PULLUP")),
IOStandard("LVCMOS33")),
("ddram_clock", 0,
Subsignal("p", Pins("G3")),
Subsignal("n", Pins("G1")),
IOStandard("MOBILE_DDR")), # actually DIFF_
# Micron MT46H32M16LFBF-5 LPDDR
("ddram", 0,
Subsignal("a", Pins("J7 J6 H5 L7 F3 H4 H3 H6 "
"D2 D1 F4 D3 G6")),
Subsignal("ba", Pins("F2 F1")),
Subsignal("dq", Pins("L2 L1 K2 K1 H2 H1 J3 J1 "
"M3 M1 N2 N1 T2 T1 U2 U1")),
Subsignal("cke", Pins("H7")),
Subsignal("we_n", Pins("E3")),
Subsignal("cs_n", Pins("K6")), # NC!
Subsignal("cas_n", Pins("K5")),
Subsignal("ras_n", Pins("L5")),
Subsignal("dm", Pins("K3", "K4")),
Subsignal("dqs", Pins("L4", "P2")),
Subsignal("rzq", Pins("N4")),
IOStandard("MOBILE_DDR")),
# Nat Semi DP83848J 10/100 Ethernet PHY
# pull-ups on col and rx_data set phy addr to 11111b
# and prevent isolate mode (addr 00000b)
("eth_clocks", 0,
Subsignal("rx", Pins("L15")),
Subsignal("tx", Pins("H17")),
IOStandard("LVCMOS33")),
("eth", 0,
Subsignal("col", Pins("M18"), Misc("PULLUP")),
Subsignal("crs", Pins("N17"), Misc("PULLDOWN")),
Subsignal("mdc", Pins("M16"), Misc("PULLDOWN")),
Subsignal("mdio", Pins("L18"), Misc("PULLUP")), # 1k5 ext PULLUP
Subsignal("rst_n", Pins("T18"), Misc("TIG")),
Subsignal("rx_data", Pins("T17 N16 N15 P18"), Misc("PULLUP")),
Subsignal("dv", Pins("P17"), Misc("PULLDOWN")), # MII
Subsignal("rx_er", Pins("N18"), Misc("PULLUP")), # auto MDIX
Subsignal("tx_data", Pins("K18 K17 J18 J16")),
Subsignal("tx_en", Pins("L17")),
Subsignal("tx_er", Pins("L16")), # NC!
IOStandard("LVCMOS33")),
]
class Platform(XilinxPlatform):
default_clk_name = "clk_y3"
default_clk_period = 10
def __init__(self):
XilinxPlatform.__init__(self, "xc6slx9-2csg324", _io)
self.add_platform_command("""
CONFIG VCCAUX = "3.3";
""")
self.toolchain.bitgen_opt = "-g LCK_cycle:6 -g Binary:Yes -w -g SPI_buswidth:4"
self.toolchain.ise_commands = """
promgen -w -spi -c FF -p mcs -o {build_name}.mcs -u 0 {build_name}.bit
"""
def do_finalize(self, fragment):
XilinxPlatform.do_finalize(self, fragment)
try:
eth_clocks = self.lookup_request("eth_clocks")
self.add_period_constraint(eth_clocks.rx, 40)
self.add_period_constraint(eth_clocks.tx, 40)
self.add_platform_command("""
TIMESPEC "TS{phy_tx_clk}_io" = FROM "GRP{phy_tx_clk}" TO "PADS" 10 ns;
TIMESPEC "TS{phy_rx_clk}_io" = FROM "PADS" TO "GRP{phy_rx_clk}" 10 ns;
""", phy_rx_clk=eth_clocks.rx, phy_tx_clk=eth_clocks.tx)
except ConstraintError:
pass