litex/migen/build/fpgalink_programmer.py

103 lines
3.3 KiB
Python

import os
from migen.build.generic_programmer import GenericProgrammer
from migen.build.xilinx.programmer import _create_xsvf
try:
import fl
except ImportError:
import fpgalink3 as fl
fl.flInitialise(0)
class FPGALink(GenericProgrammer):
"""Using the fpgalink library from makestuff
You will need fpgalink library installed from
https://github.com/makestuff/libfpgalink
"""
needs_bitreverse = False
def __init__(self, initial_vidpid=None, pin_cfg="D0D2D3D4",
fpgalink_vidpid="1D50:602B:0002", flash_proxy_basename=None):
"""
Parameters
----------
initial_vidpid : string
The USB vendor and product id of the device before fpgalink
firmware is loaded onto the device.
Format is vid:pid as 4 digit hex numbers.
pin_cfg : string
FPGALink pin configuration string describing how the JTAG interface
is hooked up to the programmer.
fpgalink_vidpid : string
The USB vendor, product and device id of the device after the
fpgalink firmware is loaded onto the device.
Format is vid:pid:did as 4 digit hex numbers.
Defaults to 1D50:602B:0002 which is the makestuff FPGALink device.
"""
GenericProgrammer.__init__(self, flash_proxy_basename)
self.initial_vidpid = initial_vidpid
self.fpgalink_vidpid = fpgalink_vidpid
self.pin_cfg = pin_cfg
def open_device(self):
ivp = self.initial_vidpid
vp = self.fpgalink_vidpid
print("Attempting to open connection to FPGALink device", vp, "...")
try:
handle = fl.flOpen(self.fpgalink_vidpid)
except fl.FLException as ex:
if not ivp:
raise FLException(
"Could not open FPGALink device at {0} and"
" no initial VID:PID was supplied".format(vp))
print("Loading firmware into %s..." % ivp)
fl.flLoadStandardFirmware(ivp, vp)
print("Awaiting renumeration...")
if not fl.flAwaitDevice(vp, 600):
raise fl.FLException(
"FPGALink device did not renumerate properly"
" as {0}".format(vp))
print("Attempting to open connection to FPGALink device", vp,
"again...")
handle = fl.flOpen(vp)
# Only Nero capable hardware support doing programming.
assert fl.flIsNeroCapable(handle)
print("Cable connection opened.")
return handle
def load_bitstream(self, bitstream_file):
n = 27
xsvf_file = os.path.splitext(bitstream_file)[0]+'.xsvf'
print("\nGenerating xsvf formatted bitstream")
print("="*n)
if os.path.exists(xsvf_file):
os.unlink(xsvf_file)
_create_xsvf(bitstream_file, xsvf_file)
print("\n"+"="*n+"\n")
print("Programming %s to device." % xsvf_file)
print("="*n)
handle = self.open_device()
print("Programming device...")
fl.flProgram(handle, "J:"+self.pin_cfg, progFile=xsvf_file)
print("Programming successful!")
print("="*n+"\n")
fl.flClose(handle)
def flash(self, address, data_file):
raise NotImplementedError("Not supported yet.")