litex/README

130 lines
5.3 KiB
Plaintext

__ ___ _ ____ _____
/ |/ / (_) / __/__ / ___/
/ /|_/ / / / _\ \/ _ \/ /__
/_/ /_/ /_/ /___/\___/\___/
Copyright 2007-2015 / M-Labs Ltd
Copyright 2012-2015 / Enjoy-Digital
a high performance and small footprint SoC based on Migen
[> Features
-----------
* LatticeMico32 CPU, modified to include an optional MMU (experimental).
* mor1kx (a better OpenRISC implementation) as alternative CPU option.
* High performance memory controller capable of issuing several SDRAM commands
per FPGA cycle.
* Supports SDR, DDR, LPDDR, DDR2 and DDR3.
* Provided peripherals: UART, GPIO, timer, GPIO, NOR flash controller, SPI
flash controller, Ethernet MAC, and more.
* High performance:
- on Spartan-6, 83MHz system clock frequencies, 10+Gbps DDR
SDRAM bandwidth, 1080p 32bpp framebuffer, etc.
- on Kintex-7, 125MHz system clock frequencies (up to 200MHz without DDR3),
64Gbps DDR3 SDRAM bandwidth.
* Low resource usage: basic implementation fits easily in Spartan-6 LX9.
* Portable and easy to customize thanks to Python- and Migen-based
architecture.
* Design new peripherals using Migen and benefit from automatic CSR maps
and logic, etc.
* Possibility to encapsulate legacy Verilog/VHDL code.
* Complex FPGA cores that can be used integrated in MiSoC or in standalone:
- LiteEth: a small footprint and configurable Ethernet core
- LiteSATA: a small footprint and configurable SATA core
- LiteScope: a small footprint and configurable logic analyzer core
MiSoC comes with built-in support for the following boards:
* Mixxeo, the digital video mixer from M-Labs [XC6SLX45]
* Milkymist One, the original M-Labs video synthesizer [XC6SLX45]
* Papilio Pro, a simple and low-cost development board [XC6SLX9]
* Pipistrello, a simple board with USB and HDMI [XC6SLX45]
* De0 Nano, a simple and low-cost development board [CYCLONEIV]
* KC705, a Kintex-7 devboard from Xilinx [XC7K325T]
MiSoC is portable and support for other boards can easily be added as external
modules.
[> Quick start guide
--------------------
1. Install Python 3.3+, Migen and FPGA vendor's development tools.
Get Migen from: https://github.com/m-labs/migen
2. Install JTAG tools.
For Mixxeo and M1: http://urjtag.org
For Papilio Pro and KC705: http://xc3sprog.sourceforge.net
For De0 Nano: USBBlaster from Altera
We recommend using xc3sprog for Xilinx devices, but Vivado programmer
is also supported for Xilinx 7-series.
3. (Optional, only needed if you want to flash the bistream/software)
Obtain and build any required flash proxy bitstreams. Flash proxy bitstreams
give JTAG access to a flash chip through the FPGA.
For Mixxeo and M1: https://github.com/m-labs/fjmem-m1
For Papilio Pro: https://github.com/GadgetFactory/Papilio-Loader
(xc3sprog/trunk/bscan_spi/bscan_spi_lx9_papilio.bit)
For KC705: https://github.com/m-labs/bscan_spi_kc705
4. Compile and install binutils. Take the latest version from GNU.
mkdir build && cd build
../configure --target=lm32-elf
make
make install
5. Compile and install GCC. Take gcc-core and gcc-g++ from GNU (version 4.5 or >=4.9).
rm -rf libstdc++-v3
mkdir build && cd build
../configure --target=lm32-elf --enable-languages="c,c++" --disable-libgcc --disable-libssp
make
make install
6. Build and flash the BIOS and bitstream. Run from MiSoC:
For Mixxeo: ./make.py all
For M1: ./make.py -p m1 all
For Papilio Pro: ./make.py -t ppro all
For Pipistrello: ./make.py -t pipistrello all
For De0 Nano: ./make.py -t de0nano all load-bitstream
For KC705: ./make.py -t kc705 all
If just want to load the bitstream in volatile SRAM use:
all load-bitstream
7. Run a terminal program on the board's serial port at 115200 8-N-1.
You should get the BIOS prompt.
8. Read and experiment with the source!
Come to our IRC channel and mailing list!
A simple target is provided to test MiSoC easily with your board:
Create your target with a clock and serial pins.
Build and test it: ./make.py -t simple -p your_platform all load-bitstream
If you don't have access to a FPGA board, you can also try MiSoC with Verilator:
Download and install Verilator: http://www.veripool.org/
Test it: ./make.py -t simple -p sim build-bitstream
[> License
----------
MiSoC is released under the very permissive two-clause BSD license. Under
the terms of this license, you are authorized to use MiSoC for
closed-source proprietary designs.
Even though we do not require you to do so, those things are awesome, so please
do them if possible:
* tell us that you are using MiSoC
* cite MiSoC in publications related to research it has helped
* send us feedback and suggestions for improvements
* send us bug reports when something goes wrong
* send us the modifications and improvements you have done to MiSoC.
The use of "git format-patch" is recommended. If your submission is large and
complex and/or you are not sure how to proceed, feel free to discuss it on
the mailing list or IRC (#m-labs on Freenode) beforehand.
See LICENSE file for full copyright and license info.
[> Links
--------
Web:
http://m-labs.hk
http://enjoy-digital.fr
Code repository:
https://github.com/m-labs/misoc
You can contact us on the public mailing list devel [AT] lists.m-labs.hk.