Updated Vivado SoC example

scripts/vivado/.gitignore

@@ -1,2 +1,4 @@
 synth_*.log
+synth_*.mmi
+synth_*.bit
 synth_*.v

scripts/vivado/Makefile

@@ -6,5 +6,5 @@ help:
 
 synth_%:
 	$(VIVADO) -nojournal -log $@.log -mode batch -source $@.tcl
-	rm -rf .Xil fsm_encoding.os synth_*.backup.log
+	rm -rf .Xil fsm_encoding.os synth_*.backup.log usage_statistics_webtalk.*
 

scripts/vivado/soc_top.v

@@ -4,12 +4,8 @@ module soc_top (
 	input            clk,
 	input            resetn,
 	output           trap,
-	output [7:0]  out_byte,
+	output reg [7:0] out_byte,
-	output reg    out_byte_en,
+	output reg       out_byte_en
-
-	output        monitor_valid,
-	output [31:0] monitor_addr,
-	output [31:0] monitor_data
 );
 	// 4096 32bit words = 16kB memory
 	parameter MEM_SIZE = 4096;
@@ -46,15 +42,10 @@ module soc_top (
 		.mem_la_wstrb(mem_la_wstrb)
 	);
 
-	assign monitor_valid = mem_valid;
-	assign monitor_addr = mem_addr;
-	assign monitor_data = mem_wstrb ? mem_wdata : mem_rdata;
-
 	reg [31:0] memory [0:MEM_SIZE-1];
-	initial $readmemh("firmware.hex", memory);
+	// initial $readmemh("firmware.hex", memory);
 
 	assign mem_ready = 1;
-	assign out_byte = mem_wdata[7:0];
 
 	always @(posedge clk) begin
 		out_byte_en <= 0;
@@ -68,6 +59,7 @@ module soc_top (
 		else
 		if (mem_la_write && mem_la_addr == 32'h1000_0000) begin
 			out_byte_en <= 1;
+			out_byte <= mem_la_wdata;
 		end
 	end
 endmodule

scripts/vivado/synth_soc.tcl

@@ -3,7 +3,7 @@ read_verilog soc_top.v
 read_verilog ../../picorv32.v
 read_xdc synth_soc.xdc
 
-synth_design -part xc7a15t-csg324 -top soc_top
+synth_design -part xc7a35t-cpg236-1 -top soc_top
 opt_design
 place_design
 route_design
@@ -12,4 +12,6 @@ report_utilization
 report_timing
 
 write_verilog -force synth_soc.v
+write_bitstream -force synth_soc.bit
+# write_mem_info -force synth_soc.mmi
 

scripts/vivado/synth_soc.xdc

@@ -1 +1,34 @@
-create_clock -period 5.00 [get_ports clk]
+
+# XDC File for Basys3 Board
+###########################
+
+set_property PACKAGE_PIN W5 [get_ports clk]
+set_property IOSTANDARD LVCMOS33 [get_ports clk]
+create_clock -period 10.00 [get_ports clk]
+
+# Pmod Header JA (JA0..JA7)
+set_property PACKAGE_PIN J1 [get_ports {out_byte[0]}]
+set_property IOSTANDARD LVCMOS33 [get_ports {out_byte[0]}]
+set_property PACKAGE_PIN L2 [get_ports {out_byte[1]}]
+set_property IOSTANDARD LVCMOS33 [get_ports {out_byte[1]}]
+set_property PACKAGE_PIN J2 [get_ports {out_byte[2]}]
+set_property IOSTANDARD LVCMOS33 [get_ports {out_byte[2]}]
+set_property PACKAGE_PIN G2 [get_ports {out_byte[3]}]
+set_property IOSTANDARD LVCMOS33 [get_ports {out_byte[3]}]
+set_property PACKAGE_PIN H1 [get_ports {out_byte[4]}]
+set_property IOSTANDARD LVCMOS33 [get_ports {out_byte[4]}]
+set_property PACKAGE_PIN K2 [get_ports {out_byte[5]}]
+set_property IOSTANDARD LVCMOS33 [get_ports {out_byte[5]}]
+set_property PACKAGE_PIN H2 [get_ports {out_byte[6]}]
+set_property IOSTANDARD LVCMOS33 [get_ports {out_byte[6]}]
+set_property PACKAGE_PIN G3 [get_ports {out_byte[7]}]
+set_property IOSTANDARD LVCMOS33 [get_ports {out_byte[7]}]
+
+# Pmod Header JB (JB0..JB2)
+set_property PACKAGE_PIN A14 [get_ports {resetn}]
+set_property IOSTANDARD LVCMOS33 [get_ports {resetn}]
+set_property PACKAGE_PIN A16 [get_ports {trap}]
+set_property IOSTANDARD LVCMOS33 [get_ports {trap}]
+set_property PACKAGE_PIN B15 [get_ports {out_byte_en}]
+set_property IOSTANDARD LVCMOS33 [get_ports {out_byte_en}]
+