Major rewrite of picosoc spimemio core

picosoc/.gitignore

@@ -11,3 +11,6 @@
 /hx8kdemo.blif
 /hx8kdemo.log
 /hx8kdemo.rpt
+/hx8kdemo_syn.v
+/hx8kdemo_syn_tb.vvp
+/hx8kdemo_tb.vvp

picosoc/Makefile

@@ -19,9 +19,24 @@ hx8kprog: hx8kdemo.bin firmware.bin
 	iceprog hx8kdemo.bin
 	iceprog -o 1M firmware.bin
 
+hx8ksim: hx8kdemo_tb.vvp firmware.hex
+	vvp -N $<
+
+hx8ksynsim: hx8kdemo_syn_tb.vvp firmware.hex
+	vvp -N $<
+
 hx8kdemo.blif: hx8kdemo.v spimemio.v picosoc.v ../picorv32.v
 	yosys -ql hx8kdemo.log -p 'synth_ice40 -top hx8kdemo -blif hx8kdemo.blif' $^
 
+hx8kdemo_tb.vvp: hx8kdemo_tb.v hx8kdemo.v spimemio.v picosoc.v ../picorv32.v spiflash.v
+	iverilog -s testbench -o $@ $^ `yosys-config --datdir/ice40/cells_sim.v`
+
+hx8kdemo_syn_tb.vvp: hx8kdemo_tb.v hx8kdemo_syn.v spiflash.v
+	iverilog -s testbench -o $@ $^ `yosys-config --datdir/ice40/cells_sim.v`
+
+hx8kdemo_syn.v: hx8kdemo.blif
+	yosys -p 'read_blif -wideports hx8kdemo.blif; write_verilog hx8kdemo_syn.v'
+
 hx8kdemo.asc: hx8kdemo.pcf hx8kdemo.blif
 	arachne-pnr -d 8k -o hx8kdemo.asc -p hx8kdemo.pcf hx8kdemo.blif
 
@@ -49,6 +64,7 @@ clean:
 	rm -f testbench.vvp testbench.vcd spiflash_tb.vvp spiflash_tb.vcd
 	rm -f firmware.elf firmware_vma.elf firmware.hex firmware.bin
 	rm -f hx8kdemo.blif hx8kdemo.log hx8kdemo.asc hx8kdemo.rpt hx8kdemo.bin
+	rm -f hx8kdemo_syn.v hx8kdemo_syn_tb.vvp hx8kdemo_tb.vvp
 
-.PHONY: testbench spiflash_tb hx8kprog clean
+.PHONY: testbench spiflash_tb hx8kprog hx8ksim hx8ksynsim clean
 

picosoc/firmware.s

@@ -19,8 +19,37 @@ sw      x5,64(x0)
 sw      x5,68(x0)
 sw      x5,72(x0)
 sw      x5,76(x0)
-li      x5,0x00008067   # ret
 sw      x5,80(x0)
+sw      x5,84(x0)
+sw      x5,88(x0)
+sw      x5,92(x0)
+sw      x5,96(x0)
+sw      x5,100(x0)
+sw      x5,104(x0)
+sw      x5,108(x0)
+sw      x5,112(x0)
+sw      x5,116(x0)
+sw      x5,120(x0)
+sw      x5,124(x0)
+sw      x5,128(x0)
+sw      x5,132(x0)
+sw      x5,136(x0)
+sw      x5,140(x0)
+sw      x5,144(x0)
+sw      x5,148(x0)
+sw      x5,152(x0)
+sw      x5,156(x0)
+sw      x5,160(x0)
+sw      x5,164(x0)
+sw      x5,168(x0)
+sw      x5,172(x0)
+sw      x5,176(x0)
+sw      x5,180(x0)
+sw      x5,184(x0)
+sw      x5,188(x0)
+sw      x5,192(x0)
+li      x5,0x00008067   # ret
+sw      x5,196(x0)
 
 # setup gpio address in x5
 li      x5,0x02000000
@@ -48,8 +77,8 @@ sw      x6,0(x0)
 
 # calculate new entry point into RAM code
 slli    x3,x6,2
-andi    x3,x3,63
+andi    x3,x3,127
-addi    x3,x3,4
+addi    x3,x3,32
 
 # execute RAM code, come back to start of loop
 mv      x1,x4

picosoc/hx8kdemo_tb.v

@@ -0,0 +1,66 @@
+/*
+ *  PicoSoC - A simple example SoC using PicoRV32
+ *
+ *  Copyright (C) 2017  Clifford Wolf <clifford@clifford.at>
+ *
+ *  Permission to use, copy, modify, and/or distribute this software for any
+ *  purpose with or without fee is hereby granted, provided that the above
+ *  copyright notice and this permission notice appear in all copies.
+ *
+ *  THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ *  WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ *  ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ *  WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ *  ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ *  OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+`timescale 1 ns / 1 ps
+
+module testbench;
+	reg clk;
+	always #5 clk = (clk === 1'b0);
+
+	initial begin
+		$dumpfile("testbench.vcd");
+		$dumpvars(0, testbench);
+
+		repeat (100000) @(posedge clk);
+		$finish;
+	end
+
+	wire [7:0] leds;
+
+	wire flash_csb;
+	wire flash_clk;
+	wire flash_io0;
+	wire flash_io1;
+	wire flash_io2;
+	wire flash_io3;
+
+	always @(leds) begin
+		$display("%b", leds);
+	end
+
+	hx8kdemo uut (
+		.clk      (clk      ),
+		.leds     (leds     ),
+		.flash_csb(flash_csb),
+		.flash_clk(flash_clk),
+		.flash_io0(flash_io0),
+		.flash_io1(flash_io1),
+		.flash_io2(flash_io2),
+		.flash_io3(flash_io3)
+	);
+
+	spiflash spiflash (
+		.csb(flash_csb),
+		.clk(flash_clk),
+		.io0(flash_io0),
+		.io1(flash_io1),
+		.io2(flash_io2),
+		.io3(flash_io3)
+	);
+endmodule

picosoc/spimemio.v

@@ -21,10 +21,225 @@ module spimemio (
 	input clk, resetn,
 
 	input valid,
-	output reg ready,
+	output ready,
 	input [23:0] addr,
 	output reg [31:0] rdata,
 
+	output flash_csb,
+	output flash_clk,
+
+	output flash_io0_oe,
+	output flash_io1_oe,
+	output flash_io2_oe,
+	output flash_io3_oe,
+
+	output flash_io0_do,
+	output flash_io1_do,
+	output flash_io2_do,
+	output flash_io3_do,
+
+	input  flash_io0_di,
+	input  flash_io1_di,
+	input  flash_io2_di,
+	input  flash_io3_di
+);
+	reg        xfer_resetn;
+	reg        din_valid;
+	wire       din_ready;
+	reg  [7:0] din_data;
+	reg        din_cont;
+	reg        din_qspi;
+	reg        din_ddr;
+	reg        din_rd;
+
+	wire       dout_valid;
+	wire [7:0] dout_data;
+
+	reg [23:0] buffer;
+	reg [3:0] buffer_wen;
+
+	reg [23:0] rd_addr;
+	reg rd_valid;
+	reg rd_wait;
+	reg rd_inc;
+
+	assign ready = valid && (addr == rd_addr) && rd_valid;
+	wire jump = valid && !ready && (addr != rd_addr+4) && rd_valid;
+
+	spimemio_xfer xfer (
+		.clk          (clk         ),
+		.resetn       (xfer_resetn ),
+		.din_valid    (din_valid   ),
+		.din_ready    (din_ready   ),
+		.din_data     (din_data    ),
+		.din_cont     (din_cont    ),
+		.din_qspi     (din_qspi    ),
+		.din_ddr      (din_ddr     ),
+		.din_rd       (din_rd      ),
+		.dout_valid   (dout_valid  ),
+		.dout_data    (dout_data   ),
+		.flash_csb    (flash_csb   ),
+		.flash_clk    (flash_clk   ),
+		.flash_io0_oe (flash_io0_oe),
+		.flash_io1_oe (flash_io1_oe),
+		.flash_io2_oe (flash_io2_oe),
+		.flash_io3_oe (flash_io3_oe),
+		.flash_io0_do (flash_io0_do),
+		.flash_io1_do (flash_io1_do),
+		.flash_io2_do (flash_io2_do),
+		.flash_io3_do (flash_io3_do),
+		.flash_io0_di (flash_io0_di),
+		.flash_io1_di (flash_io1_di),
+		.flash_io2_di (flash_io2_di),
+		.flash_io3_di (flash_io3_di)
+	);
+
+	reg [3:0] state;
+
+	always @(posedge clk) begin
+		xfer_resetn <= 1;
+		din_valid <= 0;
+		din_data <= 8'h 00;
+
+		if (!resetn) begin
+			state <= 0;
+			xfer_resetn <= 0;
+			rd_valid <= 0;
+			din_cont <= 0;
+			din_qspi <= 0;
+			din_ddr <= 0;
+			din_rd <= 0;
+		end else begin
+			if (dout_valid && buffer_wen[0]) buffer[ 7: 0] <= dout_data;
+			if (dout_valid && buffer_wen[1]) buffer[15: 8] <= dout_data;
+			if (dout_valid && buffer_wen[2]) buffer[23:16] <= dout_data;
+			if (dout_valid && buffer_wen[3]) begin
+				rdata <= {dout_data, buffer};
+				rd_addr <= rd_inc ? rd_addr + 4 : addr;
+				rd_valid <= 1;
+				rd_wait <= rd_inc;
+				rd_inc <= 1;
+			end
+
+			if (dout_valid && buffer_wen) begin
+				buffer_wen <= 0;
+			end
+
+			if (valid)
+				rd_wait <= 0;
+
+			case (state)
+				0: begin
+					din_valid <= 1;
+					din_data <= 8'h ff;
+					if (din_ready)
+						state <= 1;
+				end
+				1: begin
+					if (dout_valid) begin
+						xfer_resetn <= 0;
+						state <= 2;
+					end
+				end
+				2: begin
+					din_valid <= 1;
+					din_data <= 8'h ab;
+					if (din_ready)
+						state <= 3;
+				end
+				3: begin
+					if (dout_valid) begin
+						xfer_resetn <= 0;
+						state <= 4;
+					end
+				end
+				4: begin
+					rd_inc <= 0;
+					din_valid <= 1;
+					din_data <= 8'h 03;
+					if (din_ready)
+						state <= 5;
+				end
+				5: begin
+					if (valid && !ready) begin
+						din_valid <= 1;
+						din_data <= addr[23:16];
+						if (din_ready)
+							state <= 6;
+					end
+				end
+				6: begin
+					din_valid <= 1;
+					din_data <= addr[15:8];
+					if (din_ready)
+						state <= 7;
+				end
+				7: begin
+					din_valid <= 1;
+					din_data <= addr[7:0];
+					if (din_ready)
+						state <= 8;
+				end
+				8: begin
+					din_valid <= 1;
+					din_data <= 8'h 00;
+					if (din_ready) begin
+						buffer_wen <= 4'b 0001;
+						state <= 9;
+					end
+				end
+				9: begin
+					din_valid <= 1;
+					din_data <= 8'h 00;
+					if (din_ready) begin
+						buffer_wen <= 4'b 0010;
+						state <= 10;
+					end
+				end
+				10: begin
+					din_valid <= 1;
+					din_data <= 8'h 00;
+					if (din_ready) begin
+						buffer_wen <= 4'b 0100;
+						state <= 11;
+					end
+				end
+				11: begin
+					if (!rd_wait || valid) begin
+						din_valid <= 1;
+						din_data <= 8'h 00;
+						if (din_ready) begin
+							buffer_wen <= 4'b 1000;
+							state <= 8;
+						end
+					end
+				end
+			endcase
+
+			if (jump) begin
+				rd_inc <= 0;
+				rd_valid <= 0;
+				xfer_resetn <= 0;
+				state <= 4;
+			end
+		end
+	end
+endmodule
+
+module spimemio_xfer (
+	input clk, resetn,
+
+	input            din_valid,
+	output           din_ready,
+	input      [7:0] din_data,
+	input            din_cont,
+	input            din_qspi,
+	input            din_ddr,
+	input            din_rd,
+
+	output           dout_valid,
+	output     [7:0] dout_data,
+
 	output reg flash_csb,
 	output reg flash_clk,
 
@@ -43,91 +258,91 @@ module spimemio (
 	input      flash_io2_di,
 	input      flash_io3_di
 );
-	parameter ENABLE_PREFETCH = 1;
+	localparam [3:0] mode_spi = 0;
+	reg [3:0] mode;
 
-	reg [23:0] addr_q;
+	reg [7:0] obuffer;
-	reg addr_q_vld;
+	reg [7:0] ibuffer;
 
-	reg [31:0] buffer;
+	reg [3:0] count;
-	reg [6:0] xfer_cnt;
+	reg xfer_cont;
-	reg pulse_csb_8;
+	reg xfer_qspi;
-	reg xfer_wait;
+	reg xfer_ddr;
-	reg prefetch;
+	reg xfer_rd;
+
+	reg [7:0] next_obuffer;
+	reg [7:0] next_ibuffer;
+	reg [3:0] next_count;
+
+	reg fetch_next;
+	reg last_fetch_next;
+
+	assign din_ready = din_valid && resetn && fetch_next;
+
+	assign dout_valid = fetch_next && !last_fetch_next;
+	assign dout_data = ibuffer;
+
+	always @* begin
+		flash_io0_oe = 0;
+		flash_io1_oe = 0;
+		flash_io2_oe = 0;
+		flash_io3_oe = 0;
+
+		flash_io0_do = 0;
+		flash_io1_do = 0;
+		flash_io2_do = 0;
+		flash_io3_do = 0;
+
+		next_obuffer = obuffer;
+		next_ibuffer = ibuffer;
+		next_count = count;
+		fetch_next = 0;
+
+		case (mode)
+			mode_spi: begin
+				flash_io0_oe = 1;
+				flash_io0_do = obuffer[7];
+
+				if (flash_clk) begin
+					next_obuffer = {obuffer[6:0], 1'b 0};
+					next_count = count - |count;
+				end else begin
+					next_ibuffer = {ibuffer[6:0], flash_io1_di};
+				end
+
+				fetch_next = (next_count == 0);
+			end
+		endcase
+	end
 
 	always @(posedge clk) begin
-		ready <= 0;
 		if (!resetn) begin
-			addr_q_vld <= 0;
+			mode <= mode_spi;
-			xfer_wait <= 0;
+			last_fetch_next <= 1;
-			prefetch <= 0;
-
-			xfer_cnt <= 16;
-			pulse_csb_8 <= 1;
-			buffer <= {8'h FF, 8'h AB, 16'h 0000};
-
 			flash_csb <= 1;
-			flash_clk <= 1;
-
-			flash_io0_oe <= 0;
-			flash_io1_oe <= 0;
-			flash_io2_oe <= 0;
-			flash_io3_oe <= 0;
-
-			flash_io0_do <= 0;
-			flash_io1_do <= 0;
-			flash_io2_do <= 0;
-			flash_io3_do <= 0;
-		end else
-		if (xfer_cnt) begin
-			if (xfer_cnt == 8 && pulse_csb_8) begin
-				pulse_csb_8 <= 0;
-				flash_csb <= 1;
-			end else
-			if (flash_csb) begin
-				flash_csb <= 0;
-			end else
-			if (flash_clk) begin
 			flash_clk <= 0;
-				flash_io0_oe <= 1;
+			count <= 0;
-				flash_io0_do <= buffer[31];
 		end else begin
-				flash_clk <= 1;
+			last_fetch_next <= fetch_next;
-				buffer <= {buffer, flash_io1_di};
+			if (count) begin
-				xfer_cnt <= xfer_cnt - 1;
+				flash_clk <= !flash_clk && !flash_csb;
-			end
+				obuffer <= next_obuffer;
-		end else
+				ibuffer <= next_ibuffer;
-		if (xfer_wait) begin
+				count <= next_count;
-			ready <= 1;
-			rdata <= {buffer[7:0], buffer[15:8], buffer[23:16], buffer[31:24]};
-			xfer_wait <= 0;
-		end else
-		if (valid && !ready) begin
-			if (addr_q_vld && addr_q == addr) begin
-				addr_q <= addr + 4;
-				addr_q_vld <= 1;
-				if (!prefetch)
-					xfer_cnt <= 32;
-				xfer_wait <= 1;
-				prefetch <= 0;
-			end else begin
-				flash_csb <= 1;
-				buffer <= {8'h 03, addr};
-				addr_q <= addr + 4;
-				addr_q_vld <= 1;
-				xfer_cnt <= 64;
-				xfer_wait <= 1;
-				prefetch <= 0;
-			end
-		end else if (ENABLE_PREFETCH && !prefetch) begin
-			prefetch <= 1;
-			xfer_cnt <= 32;
 			end
+			if (din_valid && din_ready) begin
+				flash_csb <= 0;
+				flash_clk <= 0;
 
-		if (ENABLE_PREFETCH && resetn && prefetch && valid && !ready && addr_q != addr) begin
+				obuffer <= din_data;
-			prefetch <= 0;
+				ibuffer <= 8'h 00;
-			xfer_cnt <= 0;
+				count <= 8;
-			xfer_wait <= 0;
+
-			flash_clk <= 1;
+				xfer_cont <= din_cont;
+				xfer_qspi <= din_qspi;
+				xfer_ddr <= din_ddr;
+				xfer_rd <= din_rd;
+			end
 		end
 	end
 endmodule