81 lines
3.3 KiB
Markdown
81 lines
3.3 KiB
Markdown
# SymbiFlow examples
|
|
|
|
This repository provides example FPGA designs that can be built using the SymbiFlow open source toolchain.
|
|
The examples target the Xilinx Artix-7 devices.
|
|
|
|
The repository includes:
|
|
|
|
* [examples](./examples) - Example FPGA designs including:
|
|
|
|
* Verilog code
|
|
* Pin constraints files
|
|
* Timing constraints files
|
|
* Makefiles for running the SymbiFlow toolchain
|
|
|
|
* [.travis.yml](.travis.yml) - Travis CI configuration file
|
|
|
|
## Toolchain installation
|
|
|
|
This section describes how to install the toolchain. This procedure is divided in two steps:
|
|
|
|
- Installing the Conda package manager
|
|
- Downloading the architecture definitions and installing the toolchain
|
|
|
|
1. Conda
|
|
|
|
```bash
|
|
wget https://repo.continuum.io/miniconda/Miniconda3-latest-Linux-x86_64.sh -O conda_installer.sh
|
|
```
|
|
|
|
2. Toolchain
|
|
|
|
For the Artix-7 devices:
|
|
|
|
```bash
|
|
INSTALL_DIR="/opt/symbiflow/xc7"
|
|
bash conda_installer.sh -b -p $INSTALL_DIR/conda && rm conda_installer.sh
|
|
source "$INSTALL_DIR/conda/etc/profile.d/conda.sh"
|
|
conda update -y -q conda
|
|
|
|
wget -qO- https://storage.googleapis.com/symbiflow-arch-defs/artifacts/prod/foss-fpga-tools/symbiflow-arch-defs/continuous/install/4/20200416-002215/symbiflow-arch-defs-install-a321d9d9.tar.xz | tar -xJ -C $INSTALL_DIR
|
|
conda install -y -c symbiflow yosys yosys-plugins vtr-no-gui
|
|
conda install -y make lxml simplejson intervaltree git pip
|
|
conda activate
|
|
pip install python-constraint
|
|
pip install git+https://github.com/symbiflow/fasm
|
|
conda deactivate
|
|
```
|
|
|
|
## Build Example Designs
|
|
|
|
With the toolchain installed, you can build the example designs.
|
|
The example designs are provided in separate directories:
|
|
|
|
* `examples/xc7` directory for the Artix-7 devices
|
|
|
|
### Example designs for the Artix-7 devices:
|
|
|
|
1. `counter` - simple 4-bit counter driving LEDs. The design targets the [Basys3 board](https://store.digilentinc.com/basys-3-artix-7-fpga-trainer-board-recommended-for-introductory-users/)
|
|
1. `picosoc` - [picorv32](https://github.com/cliffordwolf/picorv32) based SoC. The design targets the [Basys3 board](https://store.digilentinc.com/basys-3-artix-7-fpga-trainer-board-recommended-for-introductory-users/).
|
|
1. `linux_litex` - [LiteX](https://github.com/enjoy-digital/litex) based system with Linux capable [VexRiscv core](https://github.com/SpinalHDL/VexRiscv). The design includes [DDR](https://github.com/enjoy-digital/litedram) and [Ethernet](https://github.com/enjoy-digital/liteeth) controllers. The design targets the [Arty board](https://store.digilentinc.com/arty-a7-artix-7-fpga-development-board-for-makers-and-hobbyists/).
|
|
|
|
The Linux images for the `linux_litex` example can be built following the [linux on litex vexriscv](https://github.com/litex-hub/linux-on-litex-vexriscv) instructions.
|
|
The `linux_litex` example is already provided with working Linux images.
|
|
|
|
To build the examples, run the following commands:
|
|
|
|
```bash
|
|
export INSTALL_DIR="/opt/symbiflow/xc7"
|
|
# adding symbiflow toolchain binaries to PATH
|
|
export PATH="$INSTALL_DIR/install/bin:$PATH"
|
|
source "$INSTALL_DIR/conda/etc/profile.d/conda.sh"
|
|
conda activate
|
|
git clone https://github.com/SymbiFlow/symbiflow-examples && cd symbiflow-examples
|
|
# counter example
|
|
pushd examples/xc7/counter_test && make && popd
|
|
# picosoc example
|
|
pushd examples/xc7/picosoc_demo && make && popd
|
|
# litex example
|
|
pushd examples/xc7/linux_litex_demo && make && popd
|
|
```
|