efad6b3ca5
gen: Add option to specify CSR base for standalone cores
...
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2020-05-12 21:55:05 +10:00
c91cbb597d
gen: Remove obsolete bus_expose config option
...
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2020-05-12 21:54:47 +10:00
4e539ad76e
litedram_gen: switch to SoCCore.
2020-05-12 09:21:36 +02:00
ac33d29727
litedram_gen: simplify and expose bus when CPU is set to None.
2020-05-12 09:07:59 +02:00
fe478382e1
litedram_gen: expose a Bus Slave port instead of a CSR port.
...
The logic overhead is minimal and it makes things easier with more flexibility:
- since the main Bus is arbitrated, CPU and Bus Slave can coexist.
- integration is easier in LiteX.
- bridging to APB/AXI is easier.
2020-05-11 22:47:09 +02:00
efe9a44c93
frontend/adaptation: clean up LiteDRAMNativePortUpConverter code
2020-05-11 16:47:43 +02:00
2f35e9714d
frontend/adaptation: fix error when read follows write to the same address
2020-05-11 16:11:40 +02:00
1587ee3611
frontend/adaptation: use port.cmd.last instead of port.flush in up-converter
2020-05-11 15:28:32 +02:00
35fa91c055
test/crossbar: up-conversion with mode="both" should be working now
2020-05-11 14:56:39 +02:00
9b90a56e07
frontend/adaptation: combine read/write port up-converters and extend tests
2020-05-11 14:56:39 +02:00
762cd6d0f1
test/adaptation: add port converter tests with mode="both"
2020-05-11 14:56:39 +02:00
7a0f7a7ead
test/common: fix error in test data
2020-05-11 14:56:39 +02:00
1cc9656a2d
test/crossbar: improve NativePortDriver to use separate generatos on data paths
2020-05-11 14:25:06 +02:00
025e280804
test/crossbar: fix test that was not being run
2020-05-11 14:25:06 +02:00
52b49fb80e
test/reference: update.
2020-05-09 18:02:42 +02:00
52ca3936fe
modules: add MT41J512M16/MT41K512M16.
2020-05-09 16:37:24 +02:00
589957f115
phy: extend Bitslip capability to 2 sys_clk cycles.
2020-05-08 13:12:17 +02:00
5c0231d929
common/BitSlip: add cycles parameter to extend bitstlip to multiple system clock cycles.
2020-05-08 13:09:54 +02:00
ed0810a1af
gen: Optionally pass cpu_variant from YAML to SoC
...
This allows the right gcc options to be set when using for
example VexRiscv_Min.v
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2020-05-06 21:42:37 +02:00
70054bacdb
Add support for DDR4 RDIMMs
...
Signed-off-by: David Shah <dave@ds0.me>
2020-04-29 12:34:41 +01:00
dfe6f90569
Merge pull request #188 from daveshah1/ddr4_dimm_x4
...
usddrphy: Support for x4 chip based DIMMs
2020-04-29 12:03:10 +02:00
9f136c0fce
Merge pull request #187 from daveshah1/add_MTA18ASF2G72PZ
...
modules: Add MTA18ASF2G72PZ DDR4 RDIMM
2020-04-29 12:01:52 +02:00
5b4381bcd3
usddrphy: Support for x4 chip based DIMMs
...
Signed-off-by: David Shah <dave@ds0.me>
2020-04-29 10:47:31 +01:00
97f0a3745b
modules: Add MTA18ASF2G72PZ DDR4 RDIMM
...
Signed-off-by: David Shah <dave@ds0.me>
2020-04-29 10:40:19 +01:00
9a2d3f0eb9
common: add PHYPadsReducer to only use specific DRAM modules.
...
For example on KC705, to only use the 4 first modules (bytes):
from litedram.common import PHYPadsReducer
ddram_pads = platform.request("ddram")
ddram_pads = PHYPadsReducer(ddram_pads, modules=[0, 1, 2, 3])
self.submodules.ddrphy = s7ddrphy.K7DDRPHY(ddram_pads,
[...]
On Arty, to only use the second module (byte):
from litedram.common import PHYPadsReducer
ddram_pads = platform.request("ddram")
ddram_pads = PHYPadsReducer(ddram_pads, modules=[1])
self.submodules.ddrphy = s7ddrphy.A7DDRPHY(ddram_pads,
[...]
2020-04-29 10:34:34 +02:00
20a849c652
test/reference: update ddr4_init.h
2020-04-28 11:57:11 +02:00
cec3a994e8
Merge pull request #181 from antmicro/jboc/eeprom-timings
...
Add option to load module data from DDR3 SPD EEPROM
2020-04-25 08:25:35 +02:00
48c2fc2cad
phy: simplify/improve dqs preamble/postamble.
...
Add some FIXMEs on ECP5DDRPHY.
2020-04-17 19:50:34 +02:00
312bce2bf1
modules: pass rate automatically when creating module from SPD data
2020-04-17 14:14:02 +02:00
07bbd79eaf
modules: update existsing SO-DIMM timings based on SPD data
2020-04-17 11:57:55 +02:00
eaf0691908
phy/ecp5ddrphy: simplify, working with dqs preamble/postamble.
2020-04-16 19:44:19 +02:00
12a017ff9c
phy/ecp5ddrphy: simplify/cleanup.
2020-04-16 17:54:58 +02:00
62915cd777
phy: rework BitSlip to simplify integration, add DQSPattern module.
2020-04-16 17:13:37 +02:00
9ff9e82d25
phy/usddrphy: move pads.ten control to control block.
2020-04-16 15:32:12 +02:00
91a9a2aeb1
phy/ecp5ddrphy: fix dqs preamble/postamble control. (make it similar to 7-series/Ultrascale).
2020-04-16 15:29:02 +02:00
5d29686b1a
phy/s7ddrphy/usddrphy: more compact write dqs postamble/preamble control path.
2020-04-16 15:28:29 +02:00
8d0e7f6e6a
phy/usddrphy: simplify/cleanup write control path/dqs postamble/preamble control path.
2020-04-16 15:20:22 +02:00
57b16c231c
phy/usddrphy: simplify/cleanup write control path, add DQS Pre/Postamble support.
2020-04-16 13:01:48 +02:00
1462a4375b
phy/usddrphy: cleanup/simplify read control path.
2020-04-16 12:04:55 +02:00
cd671f9b11
phy/s7ddrphy: cleanup/simplify read control path.
2020-04-16 12:04:36 +02:00
d061e60611
test/reference: update.
2020-04-16 11:38:43 +02:00
cf83ac6422
test: improve SPD tests of Micron DDR3 SO-DIMM modules
2020-04-16 10:57:09 +02:00
45a03dff53
phy/init: add phytype to PhySettings and export more parameters to C header to simplify software.
...
Also:
- rename some paramters exported to software.
- simplify wlevel registers on A7DDRPHY (add then even if not used).
- move parameters computation in separate section.
2020-04-16 10:20:34 +02:00
854a614f99
modules: fix calculations of speedgrade from tck in SPD data
2020-04-16 10:12:23 +02:00
2df90040b7
init: improve ident.
2020-04-16 09:05:45 +02:00
eca7fc2ddc
phy/ecp5ddrphy: remove Bitslip from comment (no longer present).
2020-04-16 08:51:26 +02:00
f4f2948f61
phy/ecpddrphy: remove Bitslip (not used and redundant with dqs_read) and use BitSlip software control to move dqs_read.
2020-04-15 19:27:12 +02:00
c744204e1d
modules: fix nrows in MT8KTF51264
2020-04-15 16:20:55 +02:00
3980e062d5
modules: add option to load module parameters from SPD data
2020-04-15 16:20:55 +02:00
e2b4c2bfa1
phy/ecp5ddrphy: cosmetics.
2020-04-15 15:05:57 +02:00
Benjamin Herrenschmidt
Florent Kermarrec
Jędrzej Boczar
David Shah
Jędrzej Boczar